linux-kernel - [PATCH v2 01/11] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <882739b10bd0a3b655baef9b7ee1958680aa0b04.1535462942.git.amit.kucheria@linaro.org>
Date:   Tue, 28 Aug 2018 19:08:30 +0530
From:   Amit Kucheria <amit.kucheria@...aro.org>
To:     linux-kernel@...r.kernel.org
Cc:     rnayak@...eaurora.org, linux-arm-msm@...r.kernel.org,
        bjorn.andersson@...aro.org, edubezval@...il.com,
        smohanad@...eaurora.org, andy.gross@...aro.org,
        dianders@...omium.org, mka@...omium.org,
        David Brown <david.brown@...aro.org>,
        Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Zhang Rui <rui.zhang@...el.com>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        linux-soc@...r.kernel.org, devicetree@...r.kernel.org,
        linux-pm@...r.kernel.org
Subject: [PATCH v2 01/11] arm/arm64: dts: msm8974/msm8916: thermal: Split address space into two

We've earlier added support to split the register address space into TM
and SROT regions.

Split up the regmap address space into two for the remaining platforms
that have a similar register layout and make corresponding changes to
the get_temp_common() function used by these platforms.

Since tsens-common.c/init_common() currently only registers one address
space, the order is important (TM before SROT).  This is OK since the
code doesn't really use the SROT functionality yet.

Signed-off-by: Amit Kucheria <amit.kucheria@...aro.org>
Reviewed-by: Matthias Kaehlcke <mka@...omium.org>
---
 arch/arm/boot/dts/qcom-msm8974.dtsi   | 5 +++--
 arch/arm64/boot/dts/qcom/msm8916.dtsi | 5 +++--
 drivers/thermal/qcom/tsens-common.c   | 5 +++--
 3 files changed, 9 insertions(+), 6 deletions(-)

diff --git a/arch/arm/boot/dts/qcom-msm8974.dtsi b/arch/arm/boot/dts/qcom-msm8974.dtsi
index d9019a49b292..56dbbf788d15 100644
--- a/arch/arm/boot/dts/qcom-msm8974.dtsi
+++ b/arch/arm/boot/dts/qcom-msm8974.dtsi
@@ -427,9 +427,10 @@
 			};
 		};
 
-		tsens: thermal-sensor@...a8000 {
+		tsens: thermal-sensor@...a9000 {
 			compatible = "qcom,msm8974-tsens";
-			reg = <0xfc4a8000 0x2000>;
+			reg = <0xfc4a9000 0x1000>, /* TM */
+			      <0xfc4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_calib>, <&tsens_backup>;
 			nvmem-cell-names = "calib", "calib_backup";
 			#thermal-sensor-cells = <1>;
diff --git a/arch/arm64/boot/dts/qcom/msm8916.dtsi b/arch/arm64/boot/dts/qcom/msm8916.dtsi
index 7b32b8990d62..6a277fce3333 100644
--- a/arch/arm64/boot/dts/qcom/msm8916.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8916.dtsi
@@ -761,9 +761,10 @@
 			};
 		};
 
-		tsens: thermal-sensor@...000 {
+		tsens: thermal-sensor@...000 {
 			compatible = "qcom,msm8916-tsens";
-			reg = <0x4a8000 0x2000>;
+			reg = <0x4a9000 0x1000>, /* TM */
+			      <0x4a8000 0x1000>; /* SROT */
 			nvmem-cells = <&tsens_caldata>, <&tsens_calsel>;
 			nvmem-cell-names = "calib", "calib_sel";
 			#thermal-sensor-cells = <1>;
diff --git a/drivers/thermal/qcom/tsens-common.c b/drivers/thermal/qcom/tsens-common.c
index 6207d8d92351..478739543bbc 100644
--- a/drivers/thermal/qcom/tsens-common.c
+++ b/drivers/thermal/qcom/tsens-common.c
@@ -21,7 +21,7 @@
 #include <linux/regmap.h>
 #include "tsens.h"
 
-#define S0_ST_ADDR		0x1030
+#define STATUS_OFFSET		0x30
 #define SN_ADDR_OFFSET		0x4
 #define SN_ST_TEMP_MASK		0x3ff
 #define CAL_DEGC_PT1		30
@@ -107,8 +107,9 @@ int get_temp_common(struct tsens_device *tmdev, int id, int *temp)
 	unsigned int status_reg;
 	int last_temp = 0, ret;
 
-	status_reg = S0_ST_ADDR + s->hw_id * SN_ADDR_OFFSET;
+	status_reg = tmdev->tm_offset + STATUS_OFFSET + s->hw_id * SN_ADDR_OFFSET;
 	ret = regmap_read(tmdev->map, status_reg, &code);
+
 	if (ret)
 		return ret;
 	last_temp = code & SN_ST_TEMP_MASK;
-- 
2.17.1