linux-kernel - Re: [PATCH v2 1/2] GPIO: add single-register gpio via creg driver

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <024be088-15ff-89ed-3766-09eb64e47342@infradead.org>
Date:   Tue, 28 Aug 2018 11:15:47 -0700
From:   Randy Dunlap <rdunlap@...radead.org>
To:     Eugeniy Paltsev <Eugeniy.Paltsev@...opsys.com>,
        linux-snps-arc@...ts.infradead.org, linux-gpio@...r.kernel.org
Cc:     linux-kernel@...r.kernel.org,
        Vineet Gupta <Vineet.Gupta1@...opsys.com>,
        Alexey Brodkin <Alexey.Brodkin@...opsys.com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Rob Herring <robh+dt@...nel.org>, devicetree@...r.kernel.org,
        Mark Rutland <mark.rutland@....com>
Subject: Re: [PATCH v2 1/2] GPIO: add single-register gpio via creg driver

Hi,

I don't see any updates/corrections here.  :(

On 08/28/2018 04:27 AM, Eugeniy Paltsev wrote:

> diff --git a/drivers/gpio/Kconfig b/drivers/gpio/Kconfig
> index 71c0ab46f216..0f9cc1582cab 100644
> --- a/drivers/gpio/Kconfig
> +++ b/drivers/gpio/Kconfig
> @@ -430,6 +430,15 @@ config GPIO_REG
>  	  A 32-bit single register GPIO fixed in/out implementation.  This
>  	  can be used to represent any register as a set of GPIO signals.
>  
> +config GPIO_SNPS_CREG
> +	bool "GPIO via CREG (Control REGisers) driver"
> +	select OF_GPIO
> +	help
> +	  This driver supports GPIOs via CREG on various Synopsys SoCs.
> +	  This is is single-register MMIO gpio driver for complex cases
> +	  where only several fields in register belong to GPIO and
> +	  each GPIO owns field with different length and on/off values.
> +
>  config GPIO_SPEAR_SPICS
>  	bool "ST SPEAr13xx SPI Chip Select as GPIO support"
>  	depends on PLAT_SPEAR


-- 
~Randy