| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <AM5PR0402MB2865E57EDC0DE8B0047282A2F1000@AM5PR0402MB2865.eurprd04.prod.outlook.com>
Date: Fri, 7 Sep 2018 09:48:41 +0000
From: Ran Wang <ran.wang_1@....com>
To: Leo Li <leoyang.li@....com>
CC: "dongsheng.wang@...-semitech.com" <dongsheng.wang@...-semitech.com>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
"open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS"
<devicetree@...r.kernel.org>,
linuxppc-dev <linuxppc-dev@...ts.ozlabs.org>,
lkml <linux-kernel@...r.kernel.org>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH 3/3] soc: fsl: add RCPM driver
Hi Leo,
On September 05, 2018 at 11:22 Yang Li wrote:
> -----Original Message-----
> From: Li Yang <leoyang.li@....com>
> Sent: Wednesday, September 05, 2018 11:22
> To: dongsheng.wang@...-semitech.com
> Cc: Ran Wang <ran.wang_1@....com>; Rob Herring <robh+dt@...nel.org>;
> Mark Rutland <mark.rutland@....com>; open list:OPEN FIRMWARE AND
> FLATTENED DEVICE TREE BINDINGS <devicetree@...r.kernel.org>; linuxppc-
> dev <linuxppc-dev@...ts.ozlabs.org>; lkml <linux-kernel@...r.kernel.org>;
> moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE <linux-arm-
> kernel@...ts.infradead.org>
> Subject: Re: [PATCH 3/3] soc: fsl: add RCPM driver
>
> On Tue, Sep 4, 2018 at 9:58 PM Wang, Dongsheng <dongsheng.wang@...-
> semitech.com> wrote:
> >
> > Please change your comments style.
>
> Although this doesn't get into the Linux kernel coding style documentation
> yet, Linus seems changed his mind to prefer // than /*
> */ comment style now.
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Flkml
> .org%2Flkml%2F2017%2F11%2F25%2F133&data=02%7C01%7Cran.wang_
> 1%40nxp.com%7Cc0d88e6690384e02b95108d612dec235%7C686ea1d3bc2b4c
> 6fa92cd99c5c301635%7C0%7C0%7C636717145285126200&sdata=JIoCZp
> WhRyW76EqgSflfTDA1f0gMQGKa%2FcbvSc5CO%2Fw%3D&reserved=0
> So the
> // style should be acceptable for now.
>
> >
> > On 2018/8/31 11:56, Ran Wang wrote:
> > > The NXP's QorIQ Processors based on ARM Core have RCPM module (Run
> > > Control and Power Management), which performs all device-level tasks
> > > associated with power management such as wakeup source control.
> > >
> > > This driver depends on FSL platform PM driver framework which help
> > > to isolate user and PM service provider (such as RCPM driver).
> > >
> > > Signed-off-by: Chenhui Zhao <chenhui.zhao@....com>
> > > Signed-off-by: Ying Zhang <ying.zhang22455@....com>
> > > Signed-off-by: Ran Wang <ran.wang_1@....com>
> > > ---
> > > drivers/soc/fsl/Kconfig | 6 ++
> > > drivers/soc/fsl/Makefile | 1 +
> > > drivers/soc/fsl/ls-rcpm.c | 153
> > > +++++++++++++++++++++++++++++++++++++++++++++
> > > 3 files changed, 160 insertions(+), 0 deletions(-) create mode
> > > 100644 drivers/soc/fsl/ls-rcpm.c
> > >
> > > diff --git a/drivers/soc/fsl/Kconfig b/drivers/soc/fsl/Kconfig index
> > > 6517412..882330d 100644
> > > --- a/drivers/soc/fsl/Kconfig
> > > +++ b/drivers/soc/fsl/Kconfig
> > > @@ -30,3 +30,9 @@ config FSL_PLAT_PM
> > > have to know the implement details of wakeup function it require.
> > > Besides, it is also easy for service side to upgrade its logic when
> > > design changed and remain user side unchanged.
> > > +
> > > +config LS_RCPM
> > > + bool "Freescale RCPM support"
> > > + depends on (FSL_PLAT_PM)
> > > + help
> > > + This feature is to enable specified wakeup source for system sleep.
> > > diff --git a/drivers/soc/fsl/Makefile b/drivers/soc/fsl/Makefile
> > > index 8f9db23..43ff71a 100644
> > > --- a/drivers/soc/fsl/Makefile
> > > +++ b/drivers/soc/fsl/Makefile
> > > @@ -7,3 +7,4 @@ obj-$(CONFIG_QUICC_ENGINE) += qe/
> > > obj-$(CONFIG_CPM) += qe/
> > > obj-$(CONFIG_FSL_GUTS) += guts.o
> > > obj-$(CONFIG_FSL_PLAT_PM) += plat_pm.o
> > > +obj-$(CONFIG_LS_RCPM) += ls-rcpm.o
>
> Probably use "_" instead of "-" for alignment.
OK, will update in next version
> > > diff --git a/drivers/soc/fsl/ls-rcpm.c b/drivers/soc/fsl/ls-rcpm.c
> > > new file mode 100644 index 0000000..b0feb88
> > > --- /dev/null
> > > +++ b/drivers/soc/fsl/ls-rcpm.c
> > > @@ -0,0 +1,153 @@
> > > +// SPDX-License-Identifier: GPL-2.0 // // plat_pm.c - Freescale
> > > +Layerscape RCPM driver
>
> The file name here is not the same as the real file name.
Got it, will correct it.
> > > +//
> > > +// Copyright 2018 NXP
> > > +//
> > > +// Author: Ran Wang <ran.wang_1@....com>,
>
> Where do you need the comma in the end?
My bad, will remove comma in next version.
> > > +
> > > +#include <linux/init.h>
> > > +#include <linux/module.h>
> > > +#include <linux/platform_device.h>
> > > +#include <linux/of_address.h>
> > > +#include <linux/slab.h>
> > > +#include <soc/fsl/plat_pm.h>
> > > +
> > > +#define MAX_COMPATIBLE_NUM 10
> > > +
> > > +struct rcpm_t {
> > > + struct device *dev;
> > > + void __iomem *ippdexpcr_addr;
> > > + bool big_endian; /* Big/Little endian of RCPM module */
> > > +};
> > > +
> > > +// rcpm_handle - Configure RCPM reg according to wake up source
> > > +request // @user_dev: pointer to user's device struct // @flag: to
> > > +enable(true) or disable(false) wakeup source // @handle_priv:
> > > +pointer to struct rcpm_t instance // // Return 0 on success other
> > > +negative errno
>
> Although Linus preferred this // comment style. I'm not sure if this will be
> handled correctly by the kernel-doc compiler.
> https://emea01.safelinks.protection.outlook.com/?url=https%3A%2F%2Fww
> w.kernel.org%2Fdoc%2Fhtml%2Fv4.18%2Fdoc-guide%2Fkernel-
> doc.html&data=02%7C01%7Cran.wang_1%40nxp.com%7Cc0d88e669038
> 4e02b95108d612dec235%7C686ea1d3bc2b4c6fa92cd99c5c301635%7C0%7C0
> %7C636717145285126200&sdata=H7GkUNOLVG%2FCcZESzhtHBeHCbO9
> %2FK4k9EdH30Cxq2%2BM%3D&reserved=0
So, do you think I need to change all comment style back to '/* ... */' ?
Actually I feel a little bit confused here.
Regards,
Ran
> > > +static int rcpm_handle(struct device *user_dev, bool flag, void
> > > +*handle_priv) {
> > > + struct rcpm_t *rcpm;
> > > + bool big_endian;
> > > + const char *dev_compatible_array[MAX_COMPATIBLE_NUM];
> > > + void __iomem *ippdexpcr_addr;
> > > + u32 ippdexpcr;
> > > + u32 set_bit;
> > > + int ret, num, i;
> > > +
> > > + rcpm = handle_priv;
> > > + big_endian = rcpm->big_endian;
> > > + ippdexpcr_addr = rcpm->ippdexpcr_addr;
> > > +
> > > + num = device_property_read_string_array(user_dev, "compatible",
> > > + dev_compatible_array, MAX_COMPATIBLE_NUM);
> > > + if (num < 0)
> > > + return num;
> > > +
> > > + for (i = 0; i < num; i++) {
> > > + if (!device_property_present(rcpm->dev,
> > > + dev_compatible_array[i]))
> > > + continue;
> > > + else {
> > Remove this else.
> > > + ret = device_property_read_u32(rcpm->dev,
> > > + dev_compatible_array[i], &set_bit);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + if (!device_property_present(rcpm->dev,
> > > +
> > > + dev_compatible_array[i]))
> > This has been checked. Continue ? or return ENODEV？
> > > + return -ENODEV;
> > > + else {
> > Remove this else.
> > > + ret = device_property_read_u32(rcpm->dev,
> > > + dev_compatible_array[i], &set_bit);
> > > + if (ret)
> > > + return ret;
> > > +
> > > + if (big_endian)
> > > + ippdexpcr = ioread32be(ippdexpcr_addr);
> > > + else
> > > + ippdexpcr =
> > > + ioread32(ippdexpcr_addr);
> > > +
> > > + if (flag)
> > > + ippdexpcr |= set_bit;
> > > + else
> > > + ippdexpcr &= ~set_bit;
> > > +
> > > + if (big_endian) {
> > > + iowrite32be(ippdexpcr, ippdexpcr_addr);
> > > + ippdexpcr = ioread32be(ippdexpcr_addr);
> > > + } else
> > if (x) {
> > ....
> > ....
> > } else {
> >
> > }
> > > + iowrite32(ippdexpcr,
> > > + ippdexpcr_addr);
> > > +
> > > + return 0;
> > > + }
> > > + }
> > > + }
> > > +
> > > + return -ENODEV;
> > > +}
> > > +
> > > +static int ls_rcpm_probe(struct platform_device *pdev) {
> > > + struct resource *r;
> > > + struct rcpm_t *rcpm;
> > > +
> > > + r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
> > > + if (!r)
> > > + return -ENODEV;
> > > +
> > > + rcpm = kmalloc(sizeof(*rcpm), GFP_KERNEL);
> > kzalloc is better.
> > > + if (!rcpm)
> > > + return -ENOMEM;
> > > +
> > > + rcpm->big_endian = device_property_read_bool(&pdev->dev,
> > > + "big-endian");
> > > +
> > > + rcpm->ippdexpcr_addr = devm_ioremap_resource(&pdev->dev, r);
> > > + if (IS_ERR(rcpm->ippdexpcr_addr))
> > > + return PTR_ERR(rcpm->ippdexpcr_addr);
> > > +
> > > + rcpm->dev = &pdev->dev;
> > > + platform_set_drvdata(pdev, rcpm);
> > > +
> > > + return register_fsl_platform_wakeup_source(rcpm_handle, rcpm);
> > > +}
> > > +
> > > +static int ls_rcpm_remove(struct platform_device *pdev) {
> > > + struct rcpm_t *rcpm;
> > Not need a table.
> >
> > Cheers,
> > -Dongsheng
> >
> > > +
> > > + rcpm = platform_get_drvdata(pdev);
> > > + deregister_fsl_platform_wakeup_source(rcpm);
> > > + kfree(rcpm);
> > > +
> > > + return 0;
> > > +}
> > > +
> > > +static const struct of_device_id ls_rcpm_of_match[] = {
> > > + { .compatible = "fsl,qoriq-rcpm-2.1", },
> > > + {}
> > > +};
> > > +MODULE_DEVICE_TABLE(of, ls_rcpm_of_match);
> > > +
> > > +static struct platform_driver ls_rcpm_driver = {
> > > + .driver = {
> > > + .name = "ls-rcpm",
> > > + .of_match_table = ls_rcpm_of_match,
> > > + },
> > > + .probe = ls_rcpm_probe,
> > > + .remove = ls_rcpm_remove,
> > > +};
> > > +
> > > +static int __init ls_rcpm_init(void) {
> > > + return platform_driver_register(&ls_rcpm_driver);
> > > +}
> > > +subsys_initcall(ls_rcpm_init);
> > > +
> > > +static void __exit ls_rcpm_exit(void) {
> > > + platform_driver_unregister(&ls_rcpm_driver);
> > > +}
> > > +module_exit(ls_rcpm_exit);
> >
> >
Powered by blists - more mailing lists