[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <1536799869-10643-2-git-send-email-yamada.masahiro@socionext.com>
Date: Thu, 13 Sep 2018 09:51:08 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: Vinod Koul <vkoul@...nel.org>, dmaengine@...r.kernel.org
Cc: Masami Hiramatsu <mhiramat@...nel.org>,
Jassi Brar <jaswinder.singh@...aro.org>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH v3 1/2] dt-bindings: dmaengine: add DT binding for UniPhier MIO DMAC
The MIO DMAC (Media IO DMA Controller) is used in UniPhier LD4,
Pro4, and sLD8 SoCs.
Signed-off-by: Masahiro Yamada <yamada.masahiro@...ionext.com>
Reviewed-by: Rob Herring <robh@...nel.org>
---
Changes in v3:
- Add Rob's Reviewed-by
Changes in v2:
- Rename the node "dmac" to "dma-controller"
- Remove dma-channels property
.../devicetree/bindings/dma/uniphier-mio-dmac.txt | 25 ++++++++++++++++++++++
1 file changed, 25 insertions(+)
create mode 100644 Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
diff --git a/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
new file mode 100644
index 0000000..b12388d
--- /dev/null
+++ b/Documentation/devicetree/bindings/dma/uniphier-mio-dmac.txt
@@ -0,0 +1,25 @@
+UniPhier Media IO DMA controller
+
+This works as an external DMA engine for SD/eMMC controllers etc.
+found in UniPhier LD4, Pro4, sLD8 SoCs.
+
+Required properties:
+- compatible: should be "socionext,uniphier-mio-dmac".
+- reg: offset and length of the register set for the device.
+- interrupts: a list of interrupt specifiers associated with the DMA channels.
+- clocks: a single clock specifier.
+- #dma-cells: should be <1>. The single cell represents the channel index.
+
+Example:
+ dmac: dma-controller@...00000 {
+ compatible = "socionext,uniphier-mio-dmac";
+ reg = <0x5a000000 0x1000>;
+ interrupts = <0 68 4>, <0 68 4>, <0 69 4>, <0 70 4>,
+ <0 71 4>, <0 72 4>, <0 73 4>, <0 74 4>;
+ clocks = <&mio_clk 7>;
+ #dma-cells = <1>;
+ };
+
+Note:
+In the example above, "interrupts = <0 68 4>, <0 68 4>, ..." is not a typo.
+The first two channels share a single interrupt line.
--
2.7.4
Powered by blists - more mailing lists