| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <337a1869-4c16-edb0-976e-755f786afb01@xs4all.nl>
Date: Wed, 26 Sep 2018 14:03:16 +0200
From: Hans Verkuil <hverkuil@...all.nl>
To: Eddie James <eajames@...ux.ibm.com>, linux-kernel@...r.kernel.org
Cc: mark.rutland@....com, devicetree@...r.kernel.org,
linux-aspeed@...ts.ozlabs.org, andrew@...id.au,
openbmc@...ts.ozlabs.org, robh+dt@...nel.org,
linux-media@...r.kernel.org, mchehab@...nel.org, joel@....id.au
Subject: Re: [PATCH v3 0/2] media: platform: Add Aspeed Video Engine Driver
On 09/25/2018 09:27 PM, Eddie James wrote:
> The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs
> can capture and compress video data from digital or analog sources. With
> the Aspeed chip acting as a service processor, the Video Engine can
> capture the host processor graphics output.
>
> This series adds a V4L2 driver for the VE, providing the usual V4L2 streaming
> interface by way of videobuf2. Each frame, the driver triggers the hardware to
> capture the host graphics output and compress it to JPEG format.
>
> I was unable to cross compile v4l2-compliance for ARM with our OpenBMC
> toolchain. Although bootstrap, configure, and make were successful, no binaries
> were generated... I was able to build v4l-utils 1.12.3 from the OpenEmbedded
> project, with the output below:
You can also try to build it manually:
g++ -o v4l2-compliance -DNO_LIBV4L2 v4l2-compliance.cpp v4l2-test-debug.cpp v4l2-test-input-output.cpp v4l2-test-controls.cpp v4l2-test-io-config.cpp v4l2-test-formats.cpp v4l2-test-buffers.cpp
v4l2-test-codecs.cpp v4l2-test-colors.cpp v4l2-test-media.cpp v4l2-test-subdevs.cpp media-info.cpp v4l2-info.cpp -I../.. -I../../include -I../common
(replace g++ with your cross compiler)
Hopefully that will work since 1.12.3 is way too old.
Regards,
Hans
>
> v4l2-compliance SHA : not available
>
> Driver Info:
> Driver name : aspeed-video
> Card type : Aspeed Video Engine
> Bus info : platform:aspeed-video
> Driver version: 4.18.8
> Capabilities : 0x85200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
> Device Capabilities
> Device Caps : 0x05200001
> Video Capture
> Read/Write
> Streaming
> Extended Pix Format
>
> Compliance test for device /dev/video0 (not using libv4l2):
>
> Required ioctls:
> test VIDIOC_QUERYCAP: OK
>
> Allow for multiple opens:
> test second video open: OK
> test VIDIOC_QUERYCAP: OK
> test VIDIOC_G/S_PRIORITY: OK
> test for unlimited opens: OK
>
> Debug ioctls:
> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
> test VIDIOC_LOG_STATUS: OK (Not Supported)
>
> Input ioctls:
> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
> test VIDIOC_ENUMAUDIO: OK (Not Supported)
> test VIDIOC_G/S/ENUMINPUT: OK
> test VIDIOC_G/S_AUDIO: OK (Not Supported)
> Inputs: 1 Audio Inputs: 0 Tuners: 0
>
> Output ioctls:
> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
> Outputs: 0 Audio Outputs: 0 Modulators: 0
>
> Input/Output configuration ioctls:
> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
> test VIDIOC_DV_TIMINGS_CAP: OK
> test VIDIOC_G/S_EDID: OK
>
> Test input 0:
>
> Control ioctls:
> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
> test VIDIOC_QUERYCTRL: OK
> test VIDIOC_G/S_CTRL: OK
> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
> warn: ../../../v4l-utils-1.12.3/utils/v4l2-compliance/v4l2-test-controls.cpp(811): V4L2_CID_DV_RX_POWER_PRESENT not found for input 0
> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
> Standard Controls: 3 Private Controls: 0
>
> Format ioctls:
> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
> test VIDIOC_G/S_PARM: OK
> test VIDIOC_G_FBUF: OK (Not Supported)
> test VIDIOC_G_FMT: OK
> test VIDIOC_TRY_FMT: OK
> test VIDIOC_S_FMT: OK
> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
> test Cropping: OK (Not Supported)
> test Composing: OK (Not Supported)
> test Scaling: OK (Not Supported)
>
> Codec ioctls:
> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>
> Buffer ioctls:
> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
> test VIDIOC_EXPBUF: OK (Not Supported)
>
> Test input 0:
>
> Streaming ioctls:
> test read/write: OK
> test MMAP: OK
> test USERPTR: OK (Not Supported)
> test DMABUF: OK (Not Supported)
>
>
> Total: 47, Succeeded: 47, Failed: 0, Warnings: 1
>
> Changes since v2:
> - Switch to streaming interface. This involved a lot of changes.
> - Rework memory allocation due to using videobuf2 buffers, but also only
> allocate the necessary size of source buffer rather than the max size
>
> Changes since v1:
> - Removed le32_to_cpu calls for JPEG header data
> - Reworked v4l2 ioctls to be compliant.
> - Added JPEG controls
> - Updated devicetree docs according to Rob's suggestions.
> - Added myself to MAINTAINERS
>
> Eddie James (2):
> dt-bindings: media: Add Aspeed Video Engine binding documentation
> media: platform: Add Aspeed Video Engine driver
>
> .../devicetree/bindings/media/aspeed-video.txt | 26 +
> MAINTAINERS | 8 +
> drivers/media/platform/Kconfig | 8 +
> drivers/media/platform/Makefile | 1 +
> drivers/media/platform/aspeed-video.c | 1645 ++++++++++++++++++++
> 5 files changed, 1688 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/media/aspeed-video.txt
> create mode 100644 drivers/media/platform/aspeed-video.c
>
Powered by blists - more mailing lists