| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <f033e988-e46f-b232-8ea5-a287cd48ef84@linux.vnet.ibm.com>
Date: Wed, 26 Sep 2018 13:05:10 -0500
From: Eddie James <eajames@...ux.vnet.ibm.com>
To: Hans Verkuil <hverkuil@...all.nl>,
Eddie James <eajames@...ux.ibm.com>,
linux-kernel@...r.kernel.org
Cc: mark.rutland@....com, devicetree@...r.kernel.org,
linux-aspeed@...ts.ozlabs.org, andrew@...id.au,
openbmc@...ts.ozlabs.org, robh+dt@...nel.org, mchehab@...nel.org,
linux-media@...r.kernel.org
Subject: Re: [PATCH v3 0/2] media: platform: Add Aspeed Video Engine Driver
On 09/26/2018 07:03 AM, Hans Verkuil wrote:
> On 09/25/2018 09:27 PM, Eddie James wrote:
>> The Video Engine (VE) embedded in the Aspeed AST2400 and AST2500 SOCs
>> can capture and compress video data from digital or analog sources. With
>> the Aspeed chip acting as a service processor, the Video Engine can
>> capture the host processor graphics output.
>>
>> This series adds a V4L2 driver for the VE, providing the usual V4L2 streaming
>> interface by way of videobuf2. Each frame, the driver triggers the hardware to
>> capture the host graphics output and compress it to JPEG format.
>>
>> I was unable to cross compile v4l2-compliance for ARM with our OpenBMC
>> toolchain. Although bootstrap, configure, and make were successful, no binaries
>> were generated... I was able to build v4l-utils 1.12.3 from the OpenEmbedded
>> project, with the output below:
> You can also try to build it manually:
>
> g++ -o v4l2-compliance -DNO_LIBV4L2 v4l2-compliance.cpp v4l2-test-debug.cpp v4l2-test-input-output.cpp v4l2-test-controls.cpp v4l2-test-io-config.cpp v4l2-test-formats.cpp v4l2-test-buffers.cpp
> v4l2-test-codecs.cpp v4l2-test-colors.cpp v4l2-test-media.cpp v4l2-test-subdevs.cpp media-info.cpp v4l2-info.cpp -I../.. -I../../include -I../common
>
> (replace g++ with your cross compiler)
>
> Hopefully that will work since 1.12.3 is way too old.
>
> Regards,
>
> Hans
Yea I got it built. Still no SHA :( But this is with HEAD at commit
3874aa8eb1ff0c2e103d024ba5af915b1b26f098
FYI I am also patching out the JPEG thing I mentioned, so that the
streaming test will run:
diff --git a/utils/v4l2-compliance/v4l2-test-formats.cpp
b/utils/v4l2-compliance
index 02c2ce9..1f6eaa5 100644
--- a/utils/v4l2-compliance/v4l2-test-formats.cpp
+++ b/utils/v4l2-compliance/v4l2-test-formats.cpp
@@ -330,7 +330,7 @@ static int testColorspace(__u32 pixelformat, __u32
colorspac
fail_on_test(!colorspace);
fail_on_test(colorspace == V4L2_COLORSPACE_BT878);
fail_on_test(pixelformat == V4L2_PIX_FMT_JPEG &&
- colorspace != V4L2_COLORSPACE_JPEG);
+ colorspace != V4L2_COLORSPACE_SRGB);
fail_on_test(pixelformat != V4L2_PIX_FMT_JPEG &&
colorspace == V4L2_COLORSPACE_JPEG);
fail_on_test(colorspace >= 0xff);
v4l2-compliance SHA: not available, 32 bits
Compliance test for device /dev/video0:
Driver Info:
Driver name : aspeed-video
Card type : Aspeed Video Engine
Bus info : platform:aspeed-video
Driver version : 4.18.8
Capabilities : 0x85200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Device Capabilities
Device Caps : 0x05200001
Video Capture
Read/Write
Streaming
Extended Pix Format
Required ioctls:
test VIDIOC_QUERYCAP: OK
Allow for multiple opens:
test second /dev/video0 open: OK
test VIDIOC_QUERYCAP: OK
test VIDIOC_G/S_PRIORITY: OK
test for unlimited opens: OK
Debug ioctls:
test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
test VIDIOC_LOG_STATUS: OK (Not Supported)
Input ioctls:
test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
test VIDIOC_ENUMAUDIO: OK (Not Supported)
test VIDIOC_G/S/ENUMINPUT: OK
test VIDIOC_G/S_AUDIO: OK (Not Supported)
Inputs: 1 Audio Inputs: 0 Tuners: 0
Output ioctls:
test VIDIOC_G/S_MODULATOR: OK (Not Supported)
test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
test VIDIOC_ENUMAUDOUT: OK (Not Supported)
test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
test VIDIOC_G/S_AUDOUT: OK (Not Supported)
Outputs: 0 Audio Outputs: 0 Modulators: 0
Input/Output configuration ioctls:
test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
test VIDIOC_DV_TIMINGS_CAP: OK
test VIDIOC_G/S_EDID: OK (Not Supported)
Control ioctls (Input 0):
test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
test VIDIOC_QUERYCTRL: OK
test VIDIOC_G/S_CTRL: OK
test VIDIOC_G/S/TRY_EXT_CTRLS: OK
warn: v4l2-test-controls.cpp(845): V4L2_CID_DV_RX_POWER_PRESENT
not found for input 0
test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
Standard Controls: 3 Private Controls: 0
Format ioctls (Input 0):
test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
test VIDIOC_G/S_PARM: OK
test VIDIOC_G_FBUF: OK (Not Supported)
test VIDIOC_G_FMT: OK
test VIDIOC_TRY_FMT: OK
test VIDIOC_S_FMT: OK
test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
test Cropping: OK (Not Supported)
test Composing: OK (Not Supported)
test Scaling: OK (Not Supported)
Codec ioctls (Input 0):
test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
test VIDIOC_G_ENC_INDEX: OK (Not Supported)
test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
Buffer ioctls (Input 0):
test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
test VIDIOC_EXPBUF: OK (Not Supported)
Test input 0:
Streaming ioctls:
test read/write: OK
fail: v4l2-test-buffers.cpp(1245): pid != pid_streamoff
fail: v4l2-test-buffers.cpp(1278): testBlockingDQBuf(node, q)
test blocking wait: FAIL
test MMAP: OK
test USERPTR: OK (Not Supported)
test DMABUF: OK (Not Supported)
Total: 48, Succeeded: 47, Failed: 1, Warnings: 1
Will probably have to get another patch setup for that blocking dequeue
I guess, but would appreciate any feedback on this patch.
Thanks,
Eddie
>
>> v4l2-compliance SHA : not available
>>
>> Driver Info:
>> Driver name : aspeed-video
>> Card type : Aspeed Video Engine
>> Bus info : platform:aspeed-video
>> Driver version: 4.18.8
>> Capabilities : 0x85200001
>> Video Capture
>> Read/Write
>> Streaming
>> Extended Pix Format
>> Device Capabilities
>> Device Caps : 0x05200001
>> Video Capture
>> Read/Write
>> Streaming
>> Extended Pix Format
>>
>> Compliance test for device /dev/video0 (not using libv4l2):
>>
>> Required ioctls:
>> test VIDIOC_QUERYCAP: OK
>>
>> Allow for multiple opens:
>> test second video open: OK
>> test VIDIOC_QUERYCAP: OK
>> test VIDIOC_G/S_PRIORITY: OK
>> test for unlimited opens: OK
>>
>> Debug ioctls:
>> test VIDIOC_DBG_G/S_REGISTER: OK (Not Supported)
>> test VIDIOC_LOG_STATUS: OK (Not Supported)
>>
>> Input ioctls:
>> test VIDIOC_G/S_TUNER/ENUM_FREQ_BANDS: OK (Not Supported)
>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> test VIDIOC_S_HW_FREQ_SEEK: OK (Not Supported)
>> test VIDIOC_ENUMAUDIO: OK (Not Supported)
>> test VIDIOC_G/S/ENUMINPUT: OK
>> test VIDIOC_G/S_AUDIO: OK (Not Supported)
>> Inputs: 1 Audio Inputs: 0 Tuners: 0
>>
>> Output ioctls:
>> test VIDIOC_G/S_MODULATOR: OK (Not Supported)
>> test VIDIOC_G/S_FREQUENCY: OK (Not Supported)
>> test VIDIOC_ENUMAUDOUT: OK (Not Supported)
>> test VIDIOC_G/S/ENUMOUTPUT: OK (Not Supported)
>> test VIDIOC_G/S_AUDOUT: OK (Not Supported)
>> Outputs: 0 Audio Outputs: 0 Modulators: 0
>>
>> Input/Output configuration ioctls:
>> test VIDIOC_ENUM/G/S/QUERY_STD: OK (Not Supported)
>> test VIDIOC_ENUM/G/S/QUERY_DV_TIMINGS: OK
>> test VIDIOC_DV_TIMINGS_CAP: OK
>> test VIDIOC_G/S_EDID: OK
>>
>> Test input 0:
>>
>> Control ioctls:
>> test VIDIOC_QUERY_EXT_CTRL/QUERYMENU: OK
>> test VIDIOC_QUERYCTRL: OK
>> test VIDIOC_G/S_CTRL: OK
>> test VIDIOC_G/S/TRY_EXT_CTRLS: OK
>> warn: ../../../v4l-utils-1.12.3/utils/v4l2-compliance/v4l2-test-controls.cpp(811): V4L2_CID_DV_RX_POWER_PRESENT not found for input 0
>> test VIDIOC_(UN)SUBSCRIBE_EVENT/DQEVENT: OK
>> test VIDIOC_G/S_JPEGCOMP: OK (Not Supported)
>> Standard Controls: 3 Private Controls: 0
>>
>> Format ioctls:
>> test VIDIOC_ENUM_FMT/FRAMESIZES/FRAMEINTERVALS: OK
>> test VIDIOC_G/S_PARM: OK
>> test VIDIOC_G_FBUF: OK (Not Supported)
>> test VIDIOC_G_FMT: OK
>> test VIDIOC_TRY_FMT: OK
>> test VIDIOC_S_FMT: OK
>> test VIDIOC_G_SLICED_VBI_CAP: OK (Not Supported)
>> test Cropping: OK (Not Supported)
>> test Composing: OK (Not Supported)
>> test Scaling: OK (Not Supported)
>>
>> Codec ioctls:
>> test VIDIOC_(TRY_)ENCODER_CMD: OK (Not Supported)
>> test VIDIOC_G_ENC_INDEX: OK (Not Supported)
>> test VIDIOC_(TRY_)DECODER_CMD: OK (Not Supported)
>>
>> Buffer ioctls:
>> test VIDIOC_REQBUFS/CREATE_BUFS/QUERYBUF: OK
>> test VIDIOC_EXPBUF: OK (Not Supported)
>>
>> Test input 0:
>>
>> Streaming ioctls:
>> test read/write: OK
>> test MMAP: OK
>> test USERPTR: OK (Not Supported)
>> test DMABUF: OK (Not Supported)
>>
>>
>> Total: 47, Succeeded: 47, Failed: 0, Warnings: 1
>>
>> Changes since v2:
>> - Switch to streaming interface. This involved a lot of changes.
>> - Rework memory allocation due to using videobuf2 buffers, but also only
>> allocate the necessary size of source buffer rather than the max size
>>
>> Changes since v1:
>> - Removed le32_to_cpu calls for JPEG header data
>> - Reworked v4l2 ioctls to be compliant.
>> - Added JPEG controls
>> - Updated devicetree docs according to Rob's suggestions.
>> - Added myself to MAINTAINERS
>>
>> Eddie James (2):
>> dt-bindings: media: Add Aspeed Video Engine binding documentation
>> media: platform: Add Aspeed Video Engine driver
>>
>> .../devicetree/bindings/media/aspeed-video.txt | 26 +
>> MAINTAINERS | 8 +
>> drivers/media/platform/Kconfig | 8 +
>> drivers/media/platform/Makefile | 1 +
>> drivers/media/platform/aspeed-video.c | 1645 ++++++++++++++++++++
>> 5 files changed, 1688 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/media/aspeed-video.txt
>> create mode 100644 drivers/media/platform/aspeed-video.c
>>
Powered by blists - more mailing lists