linux-kernel - [PATCH] dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <20180927222655.24482-1-lukma@denx.de>
Date:   Fri, 28 Sep 2018 00:26:55 +0200
From:   Lukasz Majewski <lukma@...x.de>
To:     Shawn Guo <shawnguo@...nel.org>, Rob Herring <robh+dt@...nel.org>,
        Mark Rutland <mark.rutland@....com>
Cc:     devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
        Lukasz Majewski <lukma@...x.de>
Subject: [PATCH] dt-bindings: misc: bk4: Add device tree binding for Liebherr's BK4 SPI bus

Add Device Tree binding document for Liebherr's BK4 external SPI bus.

Signed-off-by: Lukasz Majewski <lukma@...x.de>
---
 Documentation/devicetree/bindings/misc/lwn-bk4.txt | 26 ++++++++++++++++++++++
 1 file changed, 26 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/misc/lwn-bk4.txt

diff --git a/Documentation/devicetree/bindings/misc/lwn-bk4.txt b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
new file mode 100644
index 000000000000..d6a8c188c087
--- /dev/null
+++ b/Documentation/devicetree/bindings/misc/lwn-bk4.txt
@@ -0,0 +1,26 @@
+* Liebherr's BK4 controller external SPI
+
+A device which handles data acquisition from compatible industrial
+peripherals.
+The SPI is used for data and management purposes in both master and
+slave modes.
+
+Required properties:
+
+- compatible : Should be "lwn,bk4"
+
+Required SPI properties:
+
+- reg : Should be address of the device chip select within
+  the controller.
+
+- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be
+  30MHz at most for the Liebherr's BK4 external bus.
+
+Example:
+
+spidev0: spi@0 {
+	compatible = "lwn,bk4";
+	spi-max-frequency = <30000000>;
+	reg = <0>;
+};
-- 
2.11.0