[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20180927154053.GA3526@nishad>
Date: Thu, 27 Sep 2018 21:10:57 +0530
From: Nishad Kamdar <nishadkamdar@...il.com>
To: Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Joe Perches <joe@...ches.com>
Cc: NeilBrown <neil@...wn.name>, devel@...verdev.osuosl.org,
Christian Lütke-Stetzkamp <christian@...mp.de>,
linux-kernel@...r.kernel.org, John Crispin <blogic@...nwrt.org>,
Dan Carpenter <dan.carpenter@...cle.com>
Subject: [PATCH v3] staging: mt7621-mmc: Remove #if 0 blocks and fix macros
in sd.c
This patch removes #if 0 code blocks and usages of the
functions defined in the #if 0 code block. It removes
the macro msdc_irq_restore() and replaces its usage
with call to the function called in the macro definition.
Issue found by checkpatch.
Signed-off-by: Nishad Kamdar <nishadkamdar@...il.com>
---
Changes in v3:
- Remove the #if 0 code blocks and usages of the functions
defined in the #if 0 code block.
- Delete msdc_irq_restore() and replace its usage directly
with call to the function being called by the macro.
Changes in v2:
- Convert msdc_gate_clk() and msdc_ungate_clk() to inline functions.
- Delete msdc_irq_restore(), msdc_vcore_on(), msdc_vcore_off(),
msdc_vdd_on() and msdc_vdd_off() and replace their usages directly
with calls to the function being called by these macros.
---
drivers/staging/mt7621-mmc/sd.c | 306 +-------------------------------
1 file changed, 2 insertions(+), 304 deletions(-)
diff --git a/drivers/staging/mt7621-mmc/sd.c b/drivers/staging/mt7621-mmc/sd.c
index e3c1546373ba..dbf4dcb28b3c 100644
--- a/drivers/staging/mt7621-mmc/sd.c
+++ b/drivers/staging/mt7621-mmc/sd.c
@@ -72,11 +72,6 @@
#define GPIO_PULL_DOWN (0)
#define GPIO_PULL_UP (1)
-#if 0 /* --- by chhung */
-#define MSDC_CLKSRC_REG (0xf100000C)
-#define PDN_REG (0xF1000010)
-#endif /* end of --- */
-
#define DEFAULT_DEBOUNCE (8) /* 8 cycles */
#define DEFAULT_DTOC (40) /* data timeout counter. 65536x40 sclk. */
@@ -100,26 +95,6 @@ static int cd_active_low = 1;
//#define PERI_MSDC2_PDN (17)
//#define PERI_MSDC3_PDN (18)
-#if 0 /* --- by chhung */
-/* gate means clock power down */
-static int g_clk_gate = 0;
-#define msdc_gate_clock(id) \
- do { \
- g_clk_gate &= ~(1 << ((id) + PERI_MSDC0_PDN)); \
- } while (0)
-/* not like power down register. 1 means clock on. */
-#define msdc_ungate_clock(id) \
- do { \
- g_clk_gate |= 1 << ((id) + PERI_MSDC0_PDN); \
- } while (0)
-
-// do we need sync object or not
-void msdc_clk_status(int *status)
-{
- *status = g_clk_gate;
-}
-#endif /* end of --- */
-
/* +++ by chhung */
struct msdc_hw msdc0_hw = {
.clk_src = 0,
@@ -169,11 +144,6 @@ static void msdc_clr_fifo(struct msdc_host *host)
sdr_clr_bits(host->base + MSDC_INTEN, val); \
} while (0)
-#define msdc_irq_restore(val) \
- do { \
- sdr_set_bits(host->base + MSDC_INTEN, val); \
- } while (0)
-
/* clock source for host: global */
#if defined(CONFIG_SOC_MT7620)
static u32 hclks[] = {48000000}; /* +/- by chhung */
@@ -181,32 +151,6 @@ static u32 hclks[] = {48000000}; /* +/- by chhung */
static u32 hclks[] = {50000000}; /* +/- by chhung */
#endif
-//============================================
-// the power for msdc host controller: global
-// always keep the VMC on.
-//============================================
-#define msdc_vcore_on(host) \
- do { \
- (void)hwPowerOn(MT65XX_POWER_LDO_VMC, VOL_3300, "SD"); \
- } while (0)
-#define msdc_vcore_off(host) \
- do { \
- (void)hwPowerDown(MT65XX_POWER_LDO_VMC, "SD"); \
- } while (0)
-
-//====================================
-// the vdd output for card: global
-// always keep the VMCH on.
-//====================================
-#define msdc_vdd_on(host) \
- do { \
- (void)hwPowerOn(MT65XX_POWER_LDO_VMCH, VOL_3300, "SD"); \
- } while (0)
-#define msdc_vdd_off(host) \
- do { \
- (void)hwPowerDown(MT65XX_POWER_LDO_VMCH, "SD"); \
- } while (0)
-
#define sdc_is_busy() (readl(host->base + SDC_STS) & SDC_STS_SDCBUSY)
#define sdc_is_cmd_busy() (readl(host->base + SDC_STS) & SDC_STS_CMDBUSY)
@@ -252,7 +196,6 @@ static void msdc_tasklet_card(struct work_struct *work)
struct msdc_host, card_delaywork.work);
u32 inserted;
u32 status = 0;
- //u32 change = 0;
spin_lock(&host->lock);
@@ -262,53 +205,17 @@ static void msdc_tasklet_card(struct work_struct *work)
else
inserted = (status & MSDC_PS_CDSTS) ? 1 : 0;
-#if 0
- change = host->card_inserted ^ inserted;
- host->card_inserted = inserted;
-
- if (change && !host->suspend) {
- if (inserted)
- host->mmc->f_max = HOST_MAX_MCLK; // work around
- mmc_detect_change(host->mmc, msecs_to_jiffies(20));
- }
-#else /* Make sure: handle the last interrupt */
+ /* Make sure: handle the last interrupt */
host->card_inserted = inserted;
if (!host->suspend) {
host->mmc->f_max = HOST_MAX_MCLK;
mmc_detect_change(host->mmc, msecs_to_jiffies(20));
}
-#endif
spin_unlock(&host->lock);
}
-#if 0 /* --- by chhung */
-/* For E2 only */
-static u8 clk_src_bit[4] = {
- 0, 3, 5, 7
-};
-
-static void msdc_select_clksrc(struct msdc_host *host, unsigned char clksrc)
-{
- u32 val;
-
- BUG_ON(clksrc > 3);
-
- val = readl(host->base + MSDC_CLKSRC_REG);
- if (readl(host->base + MSDC_ECO_VER) >= 4) {
- val &= ~(0x3 << clk_src_bit[host->id]);
- val |= clksrc << clk_src_bit[host->id];
- } else {
- val &= ~0x3; val |= clksrc;
- }
- writel(val, host->base + MSDC_CLKSRC_REG);
-
- host->hclk = hclks[clksrc];
- host->hw->clk_src = clksrc;
-}
-#endif /* end of --- */
-
static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
{
//struct msdc_hw *hw = host->hw;
@@ -362,7 +269,7 @@ static void msdc_set_mclk(struct msdc_host *host, int ddr, unsigned int hz)
host->mclk = hz;
msdc_set_timeout(host, host->timeout_ns, host->timeout_clks); // need?
- msdc_irq_restore(flags);
+ sdr_set_bits(host->base + MSDC_INTEN, flags);
}
/* Fix me. when need to abort */
@@ -389,115 +296,6 @@ static void msdc_abort_data(struct msdc_host *host)
//}
}
-#if 0 /* --- by chhung */
-static void msdc_pin_config(struct msdc_host *host, int mode)
-{
- struct msdc_hw *hw = host->hw;
- int pull = (mode == MSDC_PIN_PULL_UP) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
-
- /* Config WP pin */
- if (hw->flags & MSDC_WP_PIN_EN) {
- if (hw->config_gpio_pin) /* NULL */
- hw->config_gpio_pin(MSDC_WP_PIN, pull);
- }
-
- switch (mode) {
- case MSDC_PIN_PULL_UP:
- //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 1); /* Check & FIXME */
- //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 0); /* Check & FIXME */
- sdr_set_field(host->base + MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 1);
- sdr_set_field(host->base + MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 0);
- sdr_set_field(host->base + MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 1);
- sdr_set_field(host->base + MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 0);
- break;
- case MSDC_PIN_PULL_DOWN:
- //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 0); /* Check & FIXME */
- //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 1); /* Check & FIXME */
- sdr_set_field(host->base + MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 0);
- sdr_set_field(host->base + MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 1);
- sdr_set_field(host->base + MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 0);
- sdr_set_field(host->base + MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 1);
- break;
- case MSDC_PIN_PULL_NONE:
- default:
- //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPU, 0); /* Check & FIXME */
- //sdr_set_field(MSDC_PAD_CTL0, MSDC_PAD_CTL0_CLKPD, 0); /* Check & FIXME */
- sdr_set_field(host->base + MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPU, 0);
- sdr_set_field(host->base + MSDC_PAD_CTL1, MSDC_PAD_CTL1_CMDPD, 0);
- sdr_set_field(host->base + MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPU, 0);
- sdr_set_field(host->base + MSDC_PAD_CTL2, MSDC_PAD_CTL2_DATPD, 0);
- break;
- }
-
-}
-
-void msdc_pin_reset(struct msdc_host *host, int mode)
-{
- struct msdc_hw *hw = (struct msdc_hw *)host->hw;
- int pull = (mode == MSDC_PIN_PULL_UP) ? GPIO_PULL_UP : GPIO_PULL_DOWN;
-
- /* Config reset pin */
- if (hw->flags & MSDC_RST_PIN_EN) {
- if (hw->config_gpio_pin) /* NULL */
- hw->config_gpio_pin(MSDC_RST_PIN, pull);
-
- if (mode == MSDC_PIN_PULL_UP)
- sdr_clr_bits(host->base + EMMC_IOCON, EMMC_IOCON_BOOTRST);
- else
- sdr_set_bits(host->base + EMMC_IOCON, EMMC_IOCON_BOOTRST);
- }
-}
-
-static void msdc_core_power(struct msdc_host *host, int on)
-{
- if (on && host->core_power == 0) {
- msdc_vcore_on(host);
- host->core_power = 1;
- msleep(1);
- } else if (!on && host->core_power == 1) {
- msdc_vcore_off(host);
- host->core_power = 0;
- msleep(1);
- }
-}
-
-static void msdc_host_power(struct msdc_host *host, int on)
-{
- if (on) {
- //msdc_core_power(host, 1); // need do card detection.
- msdc_pin_reset(host, MSDC_PIN_PULL_UP);
- } else {
- msdc_pin_reset(host, MSDC_PIN_PULL_DOWN);
- //msdc_core_power(host, 0);
- }
-}
-
-static void msdc_card_power(struct msdc_host *host, int on)
-{
- if (on) {
- msdc_pin_config(host, MSDC_PIN_PULL_UP);
- //msdc_vdd_on(host); // need todo card detection.
- msleep(1);
- } else {
- //msdc_vdd_off(host);
- msdc_pin_config(host, MSDC_PIN_PULL_DOWN);
- msleep(1);
- }
-}
-
-static void msdc_set_power_mode(struct msdc_host *host, u8 mode)
-{
- if (host->power_mode == MMC_POWER_OFF && mode != MMC_POWER_OFF) {
- msdc_host_power(host, 1);
- msdc_card_power(host, 1);
- } else if (host->power_mode != MMC_POWER_OFF && mode == MMC_POWER_OFF) {
- msdc_card_power(host, 0);
- msdc_host_power(host, 0);
- }
- host->power_mode = mode;
-}
-#endif /* end of --- */
-
#ifdef CONFIG_PM
/*
register as callback function of WIFI(combo_sdio_register_pm) .
@@ -754,14 +552,6 @@ static unsigned int msdc_do_command(struct msdc_host *host,
return cmd->error;
}
-#if 0 /* --- by chhung */
-// DMA resume / start / stop
-static void msdc_dma_resume(struct msdc_host *host)
-{
- sdr_set_field(host->base + MSDC_DMA_CTRL, MSDC_DMA_CTRL_RESUME, 1);
-}
-#endif /* end of --- */
-
static void msdc_dma_start(struct msdc_host *host)
{
u32 wints = MSDC_INTEN_XFER_COMPL | MSDC_INTEN_DATTMO | MSDC_INTEN_DATCRCERR;
@@ -860,12 +650,6 @@ static int msdc_do_request(struct mmc_host *mmc, struct mmc_request *mrq)
cmd = mrq->cmd;
data = mrq->cmd->data;
-#if 0 /* --- by chhung */
- //if(host->id ==1){
- msdc_ungate_clock(host->id);
- //}
-#endif /* end of --- */
-
if (!data) {
send_type = SND_CMD;
if (msdc_do_command(host, cmd, 1, CMD_TIMEOUT) != 0)
@@ -952,38 +736,8 @@ static int msdc_do_request(struct mmc_host *mmc, struct mmc_request *mrq)
dma_unmap_sg(mmc_dev(mmc), data->sg, data->sg_len,
mmc_get_dma_dir(data));
host->blksz = 0;
-
-#if 0 // don't stop twice!
- if (host->hw->flags & MSDC_REMOVABLE && data->error) {
- msdc_abort_data(host);
- /* reset in IRQ, stop command has issued. -> No need */
- }
-#endif
-
}
-#if 0 /* --- by chhung */
-#if 1
- //if(host->id==1) {
- if (send_type == SND_CMD) {
- if (cmd->opcode == MMC_SEND_STATUS) {
- if ((cmd->resp[0] & CARD_READY_FOR_DATA) || (CARD_CURRENT_STATE(cmd->resp[0]) != 7)) {
- msdc_gate_clock(host->id);
- }
- } else {
- msdc_gate_clock(host->id);
- }
- } else {
- if (read) {
- msdc_gate_clock(host->id);
- }
- }
- //}
-#else
- msdc_gate_clock(host->id);
-#endif
-#endif /* end of --- */
-
if (mrq->cmd->error)
host->error = 0x001;
if (mrq->data && mrq->data->error)
@@ -1002,11 +756,7 @@ static int msdc_app_cmd(struct mmc_host *mmc, struct msdc_host *host)
memset(&cmd, 0, sizeof(struct mmc_command));
cmd.opcode = MMC_APP_CMD;
-#if 0 /* bug: we meet mmc->card is null when ACMD6 */
- cmd.arg = mmc->card->rca << 16;
-#else
cmd.arg = host->app_cmd_arg;
-#endif
cmd.flags = MMC_RSP_SPI_R1 | MMC_RSP_R1 | MMC_CMD_AC;
memset(&mrq, 0, sizeof(struct mmc_request));
@@ -1393,22 +1143,10 @@ static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request *mrq)
{
struct msdc_host *host = mmc_priv(mmc);
- //=== for sdio profile ===
-#if 0 /* --- by chhung */
- u32 old_H32, old_L32, new_H32, new_L32;
- u32 ticks = 0, opcode = 0, sizes = 0, bRx = 0;
-#endif /* end of --- */
-
WARN_ON(host->mrq);
/* start to process */
spin_lock(&host->lock);
-#if 0 /* --- by chhung */
- if (sdio_pro_enable) { //=== for sdio profile ===
- if (mrq->cmd->opcode == 52 || mrq->cmd->opcode == 53)
- GPT_GetCounter64(&old_L32, &old_H32);
- }
-#endif /* end of --- */
host->mrq = mrq;
@@ -1428,26 +1166,6 @@ static void msdc_ops_request(struct mmc_host *mmc, struct mmc_request *mrq)
host->mrq = NULL;
-#if 0 /* --- by chhung */
- //=== for sdio profile ===
- if (sdio_pro_enable) {
- if (mrq->cmd->opcode == 52 || mrq->cmd->opcode == 53) {
- GPT_GetCounter64(&new_L32, &new_H32);
- ticks = msdc_time_calc(old_L32, old_H32, new_L32, new_H32);
-
- opcode = mrq->cmd->opcode;
- if (mrq->cmd->data) {
- sizes = mrq->cmd->data->blocks * mrq->cmd->data->blksz;
- bRx = mrq->cmd->data->flags & MMC_DATA_READ ? 1 : 0;
- } else {
- bRx = mrq->cmd->arg & 0x80000000 ? 1 : 0;
- }
-
- if (!mrq->cmd->error)
- msdc_performance(opcode, sizes, bRx, ticks);
- }
- }
-#endif /* end of --- */
spin_unlock(&host->lock);
mmc_request_done(mmc, mrq);
@@ -1514,7 +1232,6 @@ static void msdc_ops_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
switch (ios->power_mode) {
case MMC_POWER_OFF:
case MMC_POWER_UP:
- // msdc_set_power_mode(host, ios->power_mode); /* --- by chhung */
break;
case MMC_POWER_ON:
host->power_mode = MMC_POWER_ON;
@@ -1586,9 +1303,6 @@ static int msdc_ops_get_cd(struct mmc_host *mmc)
/* MSDC_CD_PIN_EN set for card */
if (host->hw->flags & MSDC_CD_PIN_EN) {
spin_lock_irqsave(&host->lock, flags);
-#if 0
- present = host->card_inserted; /* why not read from H/W: Fix me*/
-#else
// CD
present = readl(host->base + MSDC_PS) & MSDC_PS_CDSTS;
if (cd_active_low)
@@ -1730,7 +1444,6 @@ static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
* shouldn't be turned off. Here adds a reference count to keep
* the core power alive.
*/
- //msdc_vcore_on(host); //did in msdc_init_hw()
if (hw->config_gpio_pin) /* NULL */
hw->config_gpio_pin(MSDC_CD_PIN, GPIO_PULL_UP);
@@ -1753,22 +1466,12 @@ static void msdc_enable_cd_irq(struct msdc_host *host, int enable)
/* Here decreases a reference count to core power since card
* detection circuit is shutdown.
*/
- //msdc_vcore_off(host);
}
}
/* called by msdc_drv_probe */
static void msdc_init_hw(struct msdc_host *host)
{
-
- /* Power on */
-#if 0 /* --- by chhung */
- msdc_vcore_on(host);
- msdc_pin_reset(host, MSDC_PIN_PULL_UP);
- msdc_select_clksrc(host, hw->clk_src);
- enable_clock(PERI_MSDC0_PDN + host->id, "SD");
- msdc_vdd_on(host);
-#endif /* end of --- */
/* Configure to MMC/SD mode */
sdr_set_field(host->base + MSDC_CFG, MSDC_CFG_MODE, MSDC_SDMMC);
@@ -1800,10 +1503,6 @@ static void msdc_init_hw(struct msdc_host *host)
writel(0x00000000, host->base + MSDC_DAT_RDDLY1);
writel(0x00000000, host->base + MSDC_IOCON);
-#if 0 // use MT7620 default value: 0x403c004f
- /* bit0 modified: Rx Data Clock Source: 1 -> 2.0*/
- writel(0x003C000F, host->base + MSDC_PATCH_BIT0);
-#endif
if (readl(host->base + MSDC_ECO_VER) >= 4) {
if (host->id == 1) {
@@ -1870,7 +1569,6 @@ static void msdc_deinit_hw(struct msdc_host *host)
/* Disable card detection */
msdc_enable_cd_irq(host, 0);
- // msdc_set_power_mode(host, MMC_POWER_OFF); /* make sure power down */ /* --- by chhung */
}
/* init gpd and bd list in msdc_drv_probe */
--
2.17.1
Powered by blists - more mailing lists