linux-kernel - [PATCH V3 2/3] dt-bindings: mmc: sdhci-msm: Add entries for passing load values

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [thread-next>] [day] [month] [year] [list]

Message-Id: <1539004739-32060-3-git-send-email-vbadigan@codeaurora.org>
Date:   Mon,  8 Oct 2018 18:48:58 +0530
From:   Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
To:     adrian.hunter@...el.com, ulf.hansson@...aro.org,
        robh+dt@...nel.org, evgreen@...omium.org, dianders@...gle.com
Cc:     asutoshd@...eaurora.org, riteshh@...eaurora.org,
        stummala@...eaurora.org, sayalil@...eaurora.org,
        linux-mmc@...r.kernel.org, linux-arm-msm@...r.kernel.org,
        Vijay Viswanath <vviswana@...eaurora.org>,
        Veerabhadrarao Badiganti <vbadigan@...eaurora.org>,
        Mark Rutland <mark.rutland@....com>,
        devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED
        DEVICE TREE BINDINGS), linux-kernel@...r.kernel.org (open list)
Subject: [PATCH V3 2/3] dt-bindings: mmc: sdhci-msm: Add entries for passing load values

From: Vijay Viswanath <vviswana@...eaurora.org>

The load a particular sdhc controller should request from a regulator
is device specific and hence each device should individually vote for
the required load.

Signed-off-by: Vijay Viswanath <vviswana@...eaurora.org>
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
---
 Documentation/devicetree/bindings/mmc/sdhci-msm.txt | 8 ++++++++
 1 file changed, 8 insertions(+)

diff --git a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
index 502b3b8..cb22178 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-msm.txt
@@ -25,6 +25,10 @@ Required properties:
 	"xo"	- TCXO clock (optional)
 	"cal"	- reference clock for RCLK delay calibration (optional)
 	"sleep"	- sleep clock for RCLK delay calibration (optional)
+- qcom,<supply>-current-level-microamp - specifies load levels for supply during BUS_ON and
+					BUS_OFF states in power irq. Should be specified in
+					pairs (lpm, hpm), for BUS_OFF and BUS_ON respectively.
+					Units uA.
 
 Example:
 
@@ -36,7 +40,9 @@ Example:
 		non-removable;
 
 		vmmc-supply = <&pm8941_l20>;
+		qcom,vmmc-current-level-microamp = <200 570000>;
 		vqmmc-supply = <&pm8941_s3>;
+		qcom,vqmmc-current-level-microamp = <200 325000>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdc1_clk &sdc1_cmd &sdc1_data>;
@@ -53,7 +59,9 @@ Example:
 		cd-gpios = <&msmgpio 62 0x1>;
 
 		vmmc-supply = <&pm8941_l21>;
+		qcom,vmmc-current-level-microamp = <200 800000>;
 		vqmmc-supply = <&pm8941_l13>;
+		qcom,vqmmc-current-level-microamp = <200 22000>;
 
 		pinctrl-names = "default";
 		pinctrl-0 = <&sdc2_clk &sdc2_cmd &sdc2_data>;
-- 
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.