| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1539005138-32560-3-git-send-email-vbadigan@codeaurora.org>
Date: Mon, 8 Oct 2018 18:55:38 +0530
From: Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
To: adrian.hunter@...el.com, ulf.hansson@...aro.org,
robh+dt@...nel.org, evgreen@...omium.org, dianders@...gle.com
Cc: asutoshd@...eaurora.org, riteshh@...eaurora.org,
stummala@...eaurora.org, sayalil@...eaurora.org,
linux-mmc@...r.kernel.org, linux-arm-msm@...r.kernel.org,
Veerabhadrarao Badiganti <vbadigan@...eaurora.org>,
linux-kernel@...r.kernel.org (open list)
Subject: [PATCH V2 2/2] mmc: sdhci-msm: Re-initialize DLL if MCLK is gated dynamically
On few SDHCI-MSM controllers, the host controller's clock tuning
circuit may go out of sync if controller clocks are gated which
eventually will result in data CRC, command CRC/timeout errors.
To overcome this h/w limitation, the DLL needs to be re-initialized
and restored with its old settings once clocks are ungated.
Signed-off-by: Veerabhadrarao Badiganti <vbadigan@...eaurora.org>
---
drivers/mmc/host/sdhci-msm.c | 67 ++++++++++++++++++++++++++++++++++++++++++--
1 file changed, 65 insertions(+), 2 deletions(-)
diff --git a/drivers/mmc/host/sdhci-msm.c b/drivers/mmc/host/sdhci-msm.c
index 6918e70..1eb70c0 100644
--- a/drivers/mmc/host/sdhci-msm.c
+++ b/drivers/mmc/host/sdhci-msm.c
@@ -234,6 +234,7 @@ struct sdhci_msm_variant_ops {
*/
struct sdhci_msm_variant_info {
bool mci_removed;
+ bool uses_sdcdc10;
const struct sdhci_msm_variant_ops *var_ops;
const struct sdhci_msm_offset *offset;
};
@@ -264,6 +265,8 @@ struct sdhci_msm_host {
u32 vmmc_level[2];
bool vqmmc_load;
u32 vqmmc_level[2];
+ bool uses_sdcdc10_dll;
+ bool restore_sdr_dll_cfg;
};
static const struct sdhci_msm_offset *sdhci_priv_msm_offset(struct sdhci_host *host)
@@ -1031,6 +1034,36 @@ static int sdhci_msm_hs400_dll_calibration(struct sdhci_host *host)
return ret;
}
+static int sdhci_msm_restore_sdr_dll_config(struct sdhci_host *host)
+{
+ struct mmc_ios ios = host->mmc->ios;
+ struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
+ struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ int ret;
+
+ /*
+ * SDR DLL comes into picure only if clock frequency is greater than
+ * 100MHz. And its needed only for SDR104, HS200 and HS400 cards.
+ * Its not needed for HS400es cards.
+ */
+ if (host->clock <= CORE_FREQ_100MHZ ||
+ !(ios.timing == MMC_TIMING_MMC_HS400 ||
+ ios.timing == MMC_TIMING_MMC_HS200 ||
+ ios.timing == MMC_TIMING_UHS_SDR104) ||
+ ios.enhanced_strobe)
+ return 0;
+
+ /* Reset the tuning block */
+ ret = msm_init_cm_dll(host);
+ if (ret)
+ return ret;
+
+ /* Restore the tuning block */
+ ret = msm_config_cm_dll_phase(host, msm_host->saved_tuning_phase);
+
+ return ret;
+}
+
static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
{
struct sdhci_host *host = mmc_priv(mmc);
@@ -1075,7 +1108,6 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
if (rc)
return rc;
- msm_host->saved_tuning_phase = phase;
rc = mmc_send_tuning(mmc, opcode, NULL);
if (!rc) {
/* Tuning is successful at this tuning point */
@@ -1100,6 +1132,7 @@ static int sdhci_msm_execute_tuning(struct mmc_host *mmc, u32 opcode)
rc = msm_config_cm_dll_phase(host, phase);
if (rc)
return rc;
+ msm_host->saved_tuning_phase = phase;
dev_dbg(mmc_dev(mmc), "%s: Setting the tuning phase to %d\n",
mmc_hostname(mmc), phase);
} else {
@@ -1807,19 +1840,39 @@ static int sdhci_msm_start_signal_voltage_switch(struct mmc_host *mmc,
static const struct sdhci_msm_variant_info sdhci_msm_mci_var = {
.mci_removed = false,
+ .uses_sdcdc10 = false,
+ .var_ops = &mci_var_ops,
+ .offset = &sdhci_msm_mci_offset,
+};
+
+static const struct sdhci_msm_variant_info sdhci_msm_mci_sdcdc10_var = {
+ .mci_removed = false,
+ .uses_sdcdc10 = true,
.var_ops = &mci_var_ops,
.offset = &sdhci_msm_mci_offset,
};
static const struct sdhci_msm_variant_info sdhci_msm_v5_var = {
.mci_removed = true,
+ .uses_sdcdc10 = false,
+ .var_ops = &v5_var_ops,
+ .offset = &sdhci_msm_v5_offset,
+};
+
+static const struct sdhci_msm_variant_info sdhci_msm_v5_sdcdc10_var = {
+ .mci_removed = true,
+ .uses_sdcdc10 = true,
.var_ops = &v5_var_ops,
.offset = &sdhci_msm_v5_offset,
};
static const struct of_device_id sdhci_msm_dt_match[] = {
{.compatible = "qcom,sdhci-msm-v4", .data = &sdhci_msm_mci_var},
+ {.compatible = "qcom,sdhci-msm-v4-sdcdc10",
+ .data = &sdhci_msm_mci_sdcdc10_var},
{.compatible = "qcom,sdhci-msm-v5", .data = &sdhci_msm_v5_var},
+ {.compatible = "qcom,sdhci-msm-v5-sdcdc10",
+ .data = &sdhci_msm_v5_sdcdc10_var},
{},
};
@@ -1880,6 +1933,7 @@ static int sdhci_msm_probe(struct platform_device *pdev)
var_info = of_device_get_match_data(&pdev->dev);
msm_host->mci_removed = var_info->mci_removed;
+ msm_host->uses_sdcdc10_dll = var_info->uses_sdcdc10;
msm_host->var_ops = var_info->var_ops;
msm_host->offset = var_info->offset;
@@ -2124,9 +2178,18 @@ static int sdhci_msm_runtime_resume(struct device *dev)
struct sdhci_host *host = dev_get_drvdata(dev);
struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
struct sdhci_msm_host *msm_host = sdhci_pltfm_priv(pltfm_host);
+ int ret;
- return clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
+ ret = clk_bulk_prepare_enable(ARRAY_SIZE(msm_host->bulk_clks),
msm_host->bulk_clks);
+ /*
+ * Whenever core-clock is gated dynamically, it's needed to
+ * restore the SDR DLL settings when the clock is ungated.
+ */
+ if (!ret && msm_host->uses_sdcdc10_dll && msm_host->clk_rate)
+ ret = sdhci_msm_restore_sdr_dll_config(host);
+
+ return ret;
}
#endif
--
Qualcomm India Private Limited, on behalf of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project.
Powered by blists - more mailing lists