Message-ID: <20181015223252.GE127224@dtor-ws>
Date:   Mon, 15 Oct 2018 15:32:52 -0700
From:   "dmitry.torokhov@...il.com" <dmitry.torokhov@...il.com>
To:     Pascal PAILLET-LME <p.paillet@...com>
Cc:     "robh+dt@...nel.org" <robh+dt@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "lee.jones@...aro.org" <lee.jones@...aro.org>,
        "lgirdwood@...il.com" <lgirdwood@...il.com>,
        "broonie@...nel.org" <broonie@...nel.org>,
        "wim@...ux-watchdog.org" <wim@...ux-watchdog.org>,
        "linux@...ck-us.net" <linux@...ck-us.net>,
        "linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "linux-watchdog@...r.kernel.org" <linux-watchdog@...r.kernel.org>,
        "benjamin.gaignard@...aro.org" <benjamin.gaignard@...aro.org>,
        "eballetbo@...il.com" <eballetbo@...il.com>
Subject: Re: [PATCH v3 6/8] input: stpmic1: add stpmic1 onkey driver

Hi Pascal,

On Mon, Oct 08, 2018 at 04:29:41PM +0000, Pascal PAILLET-LME wrote:
> From: pascal paillet <p.paillet@...com>
> 
> The stpmic1 pmic is able to manage an onkey button. This driver exposes
> the stpmic1 onkey as an input device. It can also be configured to
> shut-down the power supplies on a long key-press with an adjustable
> duration.
> 
> Signed-off-by: pascal paillet <p.paillet@...com>
> ---
> changes in v3:
> * Rename struct stpmic1_dev by struct stpmic1.
> * Replace of_property_ by device_property.
> * Remove log in IRQ handler.
> * Add email address in MODULE_AUTHOR.
> 
>  drivers/input/misc/Kconfig         |  11 ++
>  drivers/input/misc/Makefile        |   2 +
>  drivers/input/misc/stpmic1_onkey.c | 248 +++++++++++++++++++++++++++++++++++++
>  3 files changed, 261 insertions(+)
>  create mode 100644 drivers/input/misc/stpmic1_onkey.c
> 
> diff --git a/drivers/input/misc/Kconfig b/drivers/input/misc/Kconfig
> index ca59a2b..279fb02 100644
> --- a/drivers/input/misc/Kconfig
> +++ b/drivers/input/misc/Kconfig
> @@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA
>  	  To compile this driver as a module, choose M here. The module will
>  	  be called sc27xx_vibra.
>  
> +config INPUT_STPMIC1_ONKEY
> +	tristate "STPMIC1 PMIC Onkey support"
> +	depends on MFD_STPMIC1
> +	help
> +	  Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
> +	  can be used to wakeup from low power modes and force a shut-down on
> +	  long press.
> +
> +	  To compile this driver as a module, choose M here: the
> +	  module will be called stpmic1_onkey.
> +
>  endif
> diff --git a/drivers/input/misc/Makefile b/drivers/input/misc/Makefile
> index 9d0f9d1..1b44202 100644
> --- a/drivers/input/misc/Makefile
> +++ b/drivers/input/misc/Makefile
> @@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
>  obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
>  obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o
>  obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
> +obj-$(CONFIG_INPUT_STPMIC1_ONKEY)  	+= stpmic1_onkey.o
>  obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON)	+= tps65218-pwrbutton.o
>  obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
>  obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
> @@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
>  obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
>  obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
>  obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR)	+= ideapad_slidebar.o
> +
> diff --git a/drivers/input/misc/stpmic1_onkey.c b/drivers/input/misc/stpmic1_onkey.c
> new file mode 100644
> index 0000000..871a087
> --- /dev/null
> +++ b/drivers/input/misc/stpmic1_onkey.c
> @@ -0,0 +1,248 @@
> +// SPDX-License-Identifier: GPL-2.0
> +// Copyright (C) STMicroelectronics 2018
> +// Author: Pascal Paillet <p.paillet@...com> for STMicroelectronics.
> +
> +#include <linux/input.h>
> +#include <linux/interrupt.h>
> +#include <linux/mfd/stpmic1.h>
> +#include <linux/module.h>
> +#include <linux/of.h>
> +#include <linux/platform_device.h>
> +#include <linux/property.h>
> +#include <linux/regmap.h>
> +
> +/**
> + * struct stpmic1_onkey - OnKey data
> + * @pmic:		pointer to STPMIC1 PMIC device
> + * @input_dev:		pointer to input device
> + * @irq_falling:	irq that we are hooked on to
> + * @irq_rising:		irq that we are hooked on to
> + */
> +struct stpmic1_onkey {
> +	struct stpmic1 *pmic;
> +	struct input_dev *input_dev;
> +	int irq_falling;
> +	int irq_rising;
> +};
> +
> +/**
> + * struct pmic_onkey_config - configuration of pmic PONKEYn
> + * @cc_flag_clear:		value to clear CC flag in case of PowerOff
> + * trigger by longkey press
> + * @onkey_pullup_val:		value of PONKEY PullUp (active or inactive)
> + * @power_off_time_sec:		value for long press h/w shutdown event
> + */
> +struct pmic_onkey_config {
> +	bool cc_flag_clear;
> +	u8 onkey_pullup_val;
> +	u8 power_off_time_sec;
> +};
> +
> +static irqreturn_t onkey_falling_irq(int irq, void *ponkey)
> +{
> +	struct stpmic1_onkey *onkey = ponkey;
> +	struct input_dev *input_dev = onkey->input_dev;
> +
> +	input_report_key(input_dev, KEY_POWER, 1);
> +	pm_wakeup_event(input_dev->dev.parent, 0);
> +	input_sync(input_dev);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t onkey_rising_irq(int irq, void *ponkey)
> +{
> +	struct stpmic1_onkey *onkey = ponkey;
> +	struct input_dev *input_dev = onkey->input_dev;
> +
> +	input_report_key(input_dev, KEY_POWER, 0);
> +	pm_wakeup_event(input_dev->dev.parent, 0);
> +	input_sync(input_dev);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static int stpmic1_onkey_dt_params(struct platform_device *pdev,
> +				   struct stpmic1_onkey *onkey,
> +				   struct pmic_onkey_config *config)
> +{
> +	struct device *dev = &pdev->dev;
> +	u32 val;
> +
> +	onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling");
> +	if (onkey->irq_falling < 0) {
> +		dev_err(dev, "failed: request IRQ onkey-falling %d\n",
> +			onkey->irq_falling);
> +		return onkey->irq_falling;
> +	}
> +
> +	onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising");
> +	if (onkey->irq_rising < 0) {
> +		dev_err(dev, "failed: request IRQ onkey-rising %d\n",
> +			onkey->irq_rising);
> +		return onkey->irq_rising;
> +	}
> +
> +	if (!device_property_read_u32(dev, "power-off-time-sec", &val)) {
> +		if ((val > 0) && (val <= 16)) {
> +			config->power_off_time_sec = val;
> +		} else {
> +			dev_err(dev, "power-off-time-sec out of range\n");
> +			return -EINVAL;
> +		}
> +	}
> +
> +	if (device_property_present(dev, "st,onkey-clear-cc-flag"))
> +		config->cc_flag_clear = true;
> +
> +	if (device_property_present(dev, "st,onkey-pu-inactive"))
> +		config->onkey_pullup_val = PONKEY_PU_ACTIVE;
> +
> +	dev_dbg(dev, "onkey-switch-off duration=%d seconds\n",
> +		config->power_off_time_sec);
> +
> +	return 0;
> +}
> +
> +static int stpmic1_onkey_probe(struct platform_device *pdev)
> +{
> +	struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent);
> +	struct device *dev = &pdev->dev;
> +	struct input_dev *input_dev;
> +	struct stpmic1_onkey *onkey;
> +	struct pmic_onkey_config config;
> +	unsigned int val = 0;
> +	int error;
> +
> +	onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
> +	if (!onkey)
> +		return -ENOMEM;
> +
> +	memset(&config, 0, sizeof(struct pmic_onkey_config));
> +	error = stpmic1_onkey_dt_params(pdev, onkey, &config);
> +	if (error)
> +		return error;
> +
> +	input_dev = devm_input_allocate_device(dev);
> +	if (!input_dev) {
> +		dev_err(dev, "Can't allocate Pwr Onkey Input Device\n");
> +		return -ENOMEM;
> +	}
> +
> +	input_dev->name = "pmic_onkey";
> +	input_dev->phys = "pmic_onkey/input0";
> +
> +	input_set_capability(input_dev, EV_KEY, KEY_POWER);
> +
> +	/* Setup Power Onkey Hardware parameters (long key press)*/
> +	if (config.power_off_time_sec > 0) {
> +		val |= PONKEY_PWR_OFF;
> +		val |= ((16 - config.power_off_time_sec) &
> +			PONKEY_TURNOFF_TIMER_MASK);
> +	}
> +	if (config.cc_flag_clear)

How about doing:

	if (device_property_present(dev, "st,onkey-clear-cc-flag"))
> +		val |= PONKEY_CC_FLAG_CLEAR;

and similarly handle other properties?  Then you would not really need
the "config" structure/variable nor stpmic1_onkey_dt_params() and I do
not think you'd lose any readability.

> +	error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR,
> +				   PONKEY_TURNOFF_MASK, val);
> +	if (error) {
> +		dev_err(dev, "LONG_PRESS_KEY_UPDATE failed: %d\n", error);
> +		return error;
> +	}
> +
> +	error = regmap_update_bits(pmic->regmap, PADS_PULL_CR,
> +				   PONKEY_PU_ACTIVE,
> +				   config.onkey_pullup_val);
> +	if (error) {
> +		dev_err(dev, "ONKEY Pads configuration failed: %d\n", error);
> +		return error;
> +	}
> +
> +	onkey->pmic = pmic;
> +	onkey->input_dev = input_dev;
> +
> +	/* interrupt is nested in a thread */
> +	error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL,
> +					  onkey_falling_irq, IRQF_ONESHOT,
> +					  dev_name(dev), onkey);
> +	if (error) {
> +		dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error);
> +		return error;
> +	}
> +
> +	error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL,
> +					  onkey_rising_irq, IRQF_ONESHOT,
> +					  dev_name(dev), onkey);
> +	if (error) {
> +		dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error);
> +		return error;
> +	}
> +
> +	error = input_register_device(input_dev);
> +	if (error) {
> +		dev_err(dev, "Can't register power button: %d\n", error);
> +		return error;
> +	}
> +
> +	platform_set_drvdata(pdev, onkey);
> +	device_init_wakeup(dev, true);
> +
> +	return 0;
> +}
> +
> +static int stpmic1_onkey_remove(struct platform_device *pdev)
> +{
> +	struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
> +
> +	input_unregister_device(onkey->input_dev);

Input device is devm-managed, it doe snot have to be unregistered
manually. You can remove stpmic1_onkey_remove altogether.

> +	return 0;
> +}
> +
> +static int __maybe_unused stpmic1_onkey_suspend(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
> +
> +	if (device_may_wakeup(dev)) {
> +		enable_irq_wake(onkey->irq_falling);
> +		enable_irq_wake(onkey->irq_rising);
> +	}
> +	return 0;
> +}
> +
> +static int __maybe_unused stpmic1_onkey_resume(struct device *dev)
> +{
> +	struct platform_device *pdev = to_platform_device(dev);
> +	struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
> +
> +	if (device_may_wakeup(dev)) {
> +		disable_irq_wake(onkey->irq_falling);
> +		disable_irq_wake(onkey->irq_rising);
> +	}
> +	return 0;
> +}
> +
> +static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm,
> +			 stpmic1_onkey_suspend,
> +			 stpmic1_onkey_resume);
> +
> +static const struct of_device_id of_stpmic1_onkey_match[] = {
> +	{ .compatible = "st,stpmic1-onkey" },
> +	{ },
> +};
> +
> +MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match);
> +
> +static struct platform_driver stpmic1_onkey_driver = {
> +	.probe	= stpmic1_onkey_probe,
> +	.remove	= stpmic1_onkey_remove,
> +	.driver	= {
> +		.name	= "stpmic1_onkey",
> +		.of_match_table = of_match_ptr(of_stpmic1_onkey_match),
> +		.pm	= &stpmic1_onkey_pm,
> +	},
> +};
> +module_platform_driver(stpmic1_onkey_driver);
> +
> +MODULE_DESCRIPTION("Onkey driver for STPMIC1");
> +MODULE_AUTHOR("Pascal Paillet <p.paillet@...com>");
> +MODULE_LICENSE("GPL v2");
> -- 
> 1.9.1

-- 
Dmitry

Powered by blists - more mailing lists