| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-id: <1539791563-5959-4-git-send-email-b.zolnierkie@samsung.com>
Date: Wed, 17 Oct 2018 17:52:29 +0200
From: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To: Zhang Rui <rui.zhang@...el.com>,
Eduardo Valentin <edubezval@...il.com>
Cc: Amit kucheria <amit.kucheria@...aro.org>,
Eric Anholt <eric@...olt.net>,
Stefan Wahren <stefan.wahren@...e.com>,
Markus Mayer <mmayer@...adcom.com>,
bcm-kernel-feedback-list@...adcom.com,
Heiko Stuebner <heiko@...ech.de>,
Thierry Reding <thierry.reding@...il.com>,
Jonathan Hunter <jonathanh@...dia.com>,
Keerthy <j-keerthy@...com>,
Masahiro Yamada <yamada.masahiro@...ionext.com>,
Jun Nie <jun.nie@...aro.org>,
Baoyou Xie <baoyou.xie@...aro.org>,
Shawn Guo <shawnguo@...nel.org>, linux-pm@...r.kernel.org,
linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH v2 03/17] thermal: separate sensor enable and check
operations
[devm]_thermal_zone_of_sensor_register() is used to register
thermal sensor by thermal drivers using DeviceTree. Besides
registering sensor this function also immediately:
- enables it:
tzd->ops->set_mode(tzd, THERMAL_DEVICE_ENABLED)
(->set_mode is set to of_thermal_set_mode() in of-thermal.c)
- checks it (indirectly by using of_thermal_set_mode()):
thermal_zone_device_update(tz, THERMAL_EVENT_UNSPECIFIED);
(which in turn ends up using ->get_temp method).
For many DT thermal drivers this causes a problem because:
- [devm]_thermal_zone_of_sensor_register() need to be called in
order to obtain data about thermal trips which are then used to
finish hardware sensor setup (only after which ->get_temp can
be used)
There is also related issue for DT thermal drivers that support
IRQ (i.e. exynos and rockchip ones):
- sensor hardware should be enabled only after IRQ handler is
requested (because otherwise we might get IRQs that we can't
handle)
- IRQ handler needs tzd structure which is obtained from
[devm_]thermal_zone_of_sensor_register()
- after [devm_]thermal_zone_of_sensor_register() call core
thermal code assumes that sensor is enabled and ready to use
(i.e. that IRQ handler has been requested and sensor hardware
has been enabled)
In order to prepare for fixing all abovementioned issues separate
sensor enable and check operations in the core thermal code and
update thermal drivers accordingly:
* Add set_mode_skip_check flag to struct thermal_zone_device_ops and
set it in drivers that don't check the thermal zone device in their
->set_mode method implementations.
* Move thermal_zone_device_check() from ->set_mode implementations to
the users of thermal_zone_set_mode() (only place which calls
->set_mode). Modify mode_store() in thermal_sysfs.c accordingly.
There should be no functional changes caused by this patch.
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
drivers/acpi/thermal.c | 2 ++
drivers/net/ethernet/mellanox/mlxsw/core_thermal.c | 2 --
drivers/platform/x86/acerhdf.c | 2 ++
drivers/thermal/db8500_thermal.c | 2 ++
drivers/thermal/hisi_thermal.c | 2 ++
drivers/thermal/imx_thermal.c | 2 --
drivers/thermal/int340x_thermal/int3400_thermal.c | 1 +
drivers/thermal/of-thermal.c | 6 +++---
drivers/thermal/rockchip_thermal.c | 16 ++++++++++++----
drivers/thermal/thermal_sysfs.c | 3 +++
include/linux/thermal.h | 2 ++
11 files changed, 29 insertions(+), 11 deletions(-)
diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c
index b8b275e1..a7e3d9e 100644
--- a/drivers/acpi/thermal.c
+++ b/drivers/acpi/thermal.c
@@ -879,6 +879,8 @@ static int acpi_thermal_cooling_device_cb(struct thermal_zone_device *thermal,
.get_crit_temp = thermal_get_crit_temp,
.get_trend = thermal_get_trend,
.notify = thermal_notify,
+
+ .set_mode_skip_check = true,
};
static int acpi_thermal_register_thermal_zone(struct acpi_thermal *tz)
diff --git a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
index b0afd36..5f4b3bd 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/core_thermal.c
@@ -170,8 +170,6 @@ static int mlxsw_thermal_set_mode(struct thermal_zone_device *tzdev,
thermal->mode = mode;
- thermal_zone_device_check(tzdev);
-
return 0;
}
diff --git a/drivers/platform/x86/acerhdf.c b/drivers/platform/x86/acerhdf.c
index 5a2b93a..884fd83 100644
--- a/drivers/platform/x86/acerhdf.c
+++ b/drivers/platform/x86/acerhdf.c
@@ -507,6 +507,8 @@ static int acerhdf_get_crit_temp(struct thermal_zone_device *thermal,
.get_trip_hyst = acerhdf_get_trip_hyst,
.get_trip_temp = acerhdf_get_trip_temp,
.get_crit_temp = acerhdf_get_crit_temp,
+
+ .set_mode_skip_check = true,
};
diff --git a/drivers/thermal/db8500_thermal.c b/drivers/thermal/db8500_thermal.c
index ab66b2d7..c4d0fb1 100644
--- a/drivers/thermal/db8500_thermal.c
+++ b/drivers/thermal/db8500_thermal.c
@@ -220,6 +220,8 @@ static int db8500_sys_get_crit_temp(struct thermal_zone_device *thermal,
.get_trip_type = db8500_sys_get_trip_type,
.get_trip_temp = db8500_sys_get_trip_temp,
.get_crit_temp = db8500_sys_get_crit_temp,
+
+ .set_mode_skip_check = true,
};
static void db8500_thermal_update_config(struct db8500_thermal_zone *pzone,
diff --git a/drivers/thermal/hisi_thermal.c b/drivers/thermal/hisi_thermal.c
index 63d4fc3..6151e55 100644
--- a/drivers/thermal/hisi_thermal.c
+++ b/drivers/thermal/hisi_thermal.c
@@ -561,6 +561,7 @@ static int hisi_thermal_probe(struct platform_device *pdev)
}
thermal_zone_set_mode((&data->sensor)->tzd, THERMAL_DEVICE_ENABLED);
+ thermal_zone_device_check((&data->sensor)->tzd);
return 0;
}
@@ -570,6 +571,7 @@ static int hisi_thermal_remove(struct platform_device *pdev)
struct hisi_thermal_data *data = platform_get_drvdata(pdev);
thermal_zone_set_mode((&data->sensor)->tzd, THERMAL_DEVICE_DISABLED);
+ thermal_zone_device_check((&data->sensor)->tzd);
data->disable_sensor(data);
diff --git a/drivers/thermal/imx_thermal.c b/drivers/thermal/imx_thermal.c
index 22f57ef..7abad6c 100644
--- a/drivers/thermal/imx_thermal.c
+++ b/drivers/thermal/imx_thermal.c
@@ -385,8 +385,6 @@ static int imx_set_mode(struct thermal_zone_device *tz,
data->mode = mode;
- thermal_zone_device_check(tz);
-
return 0;
}
diff --git a/drivers/thermal/int340x_thermal/int3400_thermal.c b/drivers/thermal/int340x_thermal/int3400_thermal.c
index e26b01c..d1f0641 100644
--- a/drivers/thermal/int340x_thermal/int3400_thermal.c
+++ b/drivers/thermal/int340x_thermal/int3400_thermal.c
@@ -305,6 +305,7 @@ static int int3400_thermal_probe(struct platform_device *pdev)
if (priv->uuid_bitmap & 1 << INT3400_THERMAL_PASSIVE_1) {
int3400_thermal_ops.get_mode = int3400_thermal_get_mode;
int3400_thermal_ops.set_mode = int3400_thermal_set_mode;
+ int3400_thermal_ops.set_mode_skip_check = true;
}
priv->thermal = thermal_zone_device_register("INT3400 Thermal", 0, 0,
priv, &int3400_thermal_ops,
diff --git a/drivers/thermal/of-thermal.c b/drivers/thermal/of-thermal.c
index c422b08..f1dcb7d 100644
--- a/drivers/thermal/of-thermal.c
+++ b/drivers/thermal/of-thermal.c
@@ -272,8 +272,6 @@ static int of_thermal_set_mode(struct thermal_zone_device *tz,
data->mode = mode;
- thermal_zone_device_check(tz);
-
return 0;
}
@@ -496,9 +494,11 @@ struct thermal_zone_device *
if (sensor_specs.np == sensor_np && id == sensor_id) {
tzd = thermal_zone_of_add_sensor(child, sensor_np,
data, ops);
- if (!IS_ERR(tzd))
+ if (!IS_ERR(tzd)) {
thermal_zone_set_mode(tzd,
THERMAL_DEVICE_ENABLED);
+ thermal_zone_device_check(tzd);
+ }
of_node_put(sensor_specs.np);
of_node_put(child);
diff --git a/drivers/thermal/rockchip_thermal.c b/drivers/thermal/rockchip_thermal.c
index 5640675..715f4cd 100644
--- a/drivers/thermal/rockchip_thermal.c
+++ b/drivers/thermal/rockchip_thermal.c
@@ -1281,9 +1281,11 @@ static int rockchip_thermal_probe(struct platform_device *pdev)
thermal->chip->control(thermal->regs, true);
- for (i = 0; i < thermal->chip->chn_num; i++)
+ for (i = 0; i < thermal->chip->chn_num; i++) {
thermal_zone_set_mode((&thermal->sensors[i])->tzd,
THERMAL_DEVICE_ENABLED);
+ thermal_zone_device_check((&thermal->sensors[i])->tzd);
+ }
platform_set_drvdata(pdev, thermal);
@@ -1302,9 +1304,11 @@ static int rockchip_thermal_remove(struct platform_device *pdev)
struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
int i;
- for (i = 0; i < thermal->chip->chn_num; i++)
+ for (i = 0; i < thermal->chip->chn_num; i++) {
thermal_zone_set_mode((&thermal->sensors[i])->tzd,
THERMAL_DEVICE_DISABLED);
+ thermal_zone_device_check((&thermal->sensors[i])->tzd);
+ }
thermal->chip->control(thermal->regs, false);
@@ -1320,9 +1324,11 @@ static int __maybe_unused rockchip_thermal_suspend(struct device *dev)
struct rockchip_thermal_data *thermal = platform_get_drvdata(pdev);
int i;
- for (i = 0; i < thermal->chip->chn_num; i++)
+ for (i = 0; i < thermal->chip->chn_num; i++) {
thermal_zone_set_mode((&thermal->sensors[i])->tzd,
THERMAL_DEVICE_DISABLED);
+ thermal_zone_device_check((&thermal->sensors[i])->tzd);
+ }
thermal->chip->control(thermal->regs, false);
@@ -1372,9 +1378,11 @@ static int __maybe_unused rockchip_thermal_resume(struct device *dev)
thermal->chip->control(thermal->regs, true);
- for (i = 0; i < thermal->chip->chn_num; i++)
+ for (i = 0; i < thermal->chip->chn_num; i++) {
thermal_zone_set_mode((&thermal->sensors[i])->tzd,
THERMAL_DEVICE_ENABLED);
+ thermal_zone_device_check((&thermal->sensors[i])->tzd);
+ }
pinctrl_pm_select_default_state(dev);
diff --git a/drivers/thermal/thermal_sysfs.c b/drivers/thermal/thermal_sysfs.c
index 3b38fb9..ac39fb6 100644
--- a/drivers/thermal/thermal_sysfs.c
+++ b/drivers/thermal/thermal_sysfs.c
@@ -85,6 +85,9 @@
if (result)
return result;
+ if (!tz->ops->set_mode_skip_check)
+ thermal_zone_device_check(tz);
+
return count;
}
diff --git a/include/linux/thermal.h b/include/linux/thermal.h
index 3e325b3..92c460e 100644
--- a/include/linux/thermal.h
+++ b/include/linux/thermal.h
@@ -113,6 +113,8 @@ struct thermal_zone_device_ops {
enum thermal_trend *);
int (*notify) (struct thermal_zone_device *, int,
enum thermal_trip_type);
+
+ bool set_mode_skip_check;
};
struct thermal_cooling_device_ops {
--
1.9.1
Powered by blists - more mailing lists