lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-id: <1539791563-5959-6-git-send-email-b.zolnierkie@samsung.com>
Date:   Wed, 17 Oct 2018 17:52:31 +0200
From:   Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
To:     Zhang Rui <rui.zhang@...el.com>,
        Eduardo Valentin <edubezval@...il.com>
Cc:     Amit kucheria <amit.kucheria@...aro.org>,
        Eric Anholt <eric@...olt.net>,
        Stefan Wahren <stefan.wahren@...e.com>,
        Markus Mayer <mmayer@...adcom.com>,
        bcm-kernel-feedback-list@...adcom.com,
        Heiko Stuebner <heiko@...ech.de>,
        Thierry Reding <thierry.reding@...il.com>,
        Jonathan Hunter <jonathanh@...dia.com>,
        Keerthy <j-keerthy@...com>,
        Masahiro Yamada <yamada.masahiro@...ionext.com>,
        Jun Nie <jun.nie@...aro.org>,
        Baoyou Xie <baoyou.xie@...aro.org>,
        Shawn Guo <shawnguo@...nel.org>, linux-pm@...r.kernel.org,
        linux-kernel@...r.kernel.org, b.zolnierkie@...sung.com
Subject: [PATCH v2 05/17] thermal: bcm2835: enable+check sensor after its
 setup is finished

Enable+check sensor after HW-block setup (if necessary) and setting
data->tz.

Cc: Eric Anholt <eric@...olt.net>
Cc: Stefan Wahren <stefan.wahren@...e.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <b.zolnierkie@...sung.com>
---
 drivers/thermal/broadcom/bcm2835_thermal.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/thermal/broadcom/bcm2835_thermal.c b/drivers/thermal/broadcom/bcm2835_thermal.c
index 687a00c..ec82fef 100644
--- a/drivers/thermal/broadcom/bcm2835_thermal.c
+++ b/drivers/thermal/broadcom/bcm2835_thermal.c
@@ -227,9 +227,6 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 		goto err_clk;
 	}
 
-	thermal_zone_set_mode(tz, THERMAL_DEVICE_ENABLED);
-	thermal_zone_device_check(tz);
-
 	/*
 	 * right now the FW does set up the HW-block, so we are not
 	 * touching the configuration registers.
@@ -276,6 +273,9 @@ static int bcm2835_thermal_probe(struct platform_device *pdev)
 
 	data->tz = tz;
 
+	thermal_zone_set_mode(tz, THERMAL_DEVICE_ENABLED);
+	thermal_zone_device_check(tz);
+
 	platform_set_drvdata(pdev, tz);
 
 	bcm2835_thermal_debugfs(pdev);
-- 
1.9.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ