| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <VI1PR04MB1038E92FFAB03E07048FD8B499F40@VI1PR04MB1038.eurprd04.prod.outlook.com>
Date: Mon, 22 Oct 2018 10:39:48 +0000
From: Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
To: Boris Brezillon <boris.brezillon@...tlin.com>
CC: Tudor Ambarus <tudor.ambarus@...rochip.com>,
"richard@....at" <richard@....at>, Mark Brown <broonie@...nel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"nicolas.ferre@...rochip.com" <nicolas.ferre@...rochip.com>,
"marek.vasut@...il.com" <marek.vasut@...il.com>,
"cyrille.pitchen@...rochip.com" <cyrille.pitchen@...rochip.com>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"Cristian.Birsan@...rochip.com" <Cristian.Birsan@...rochip.com>,
Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI
NOR flash memories
Hi,
> -----Original Message-----
> From: Boris Brezillon [mailto:boris.brezillon@...tlin.com]
> Sent: Monday, October 22, 2018 3:57 PM
> To: Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
> Cc: Tudor Ambarus <tudor.ambarus@...rochip.com>; richard@....at; Mark
> Brown <broonie@...nel.org>; linux-kernel@...r.kernel.org;
> nicolas.ferre@...rochip.com; marek.vasut@...il.com;
> cyrille.pitchen@...rochip.com; linux-mtd@...ts.infradead.org;
> Cristian.Birsan@...rochip.com; Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>;
> computersforpeace@...il.com; dwmw2@...radead.org; linux-arm-
> kernel@...ts.infradead.org
> Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI
> NOR flash memories
>
> On Mon, 22 Oct 2018 10:03:55 +0000
> Yogesh Narayan Gaur <yogeshnarayan.gaur@....com> wrote:
>
> > --- a/drivers/mtd/spi-nor/spi-nor.c
> > +++ b/drivers/mtd/spi-nor/spi-nor.c
> > @@ -2863,26 +2863,36 @@ static u8 spi_nor_smpt_read_dummy(const struct
> spi_nor *nor, const u32 settings)
> > * @nor: pointer to a 'struct spi_nor'
> > * @smpt: pointer to the sector map parameter table
> > */
> > -static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const
> > u32 *smpt)
> > +static const u32 *spi_nor_get_map_in_use(struct spi_nor *nor, const
> > +u32 *smpt, u32 smpt_len)
> > {
> > const u32 *ret = NULL;
> > - u32 i, addr;
> > + u32 i, addr, nmaps;
> > int err;
> > u8 addr_width, read_opcode, read_dummy;
> > u8 read_data_mask, data_byte, map_id;
> > + bool map_id_is_valid = false;
> >
> > addr_width = nor->addr_width;
> > read_dummy = nor->read_dummy;
> > read_opcode = nor->read_opcode;
> >
> > + pr_info("Start [addr_width:%08x, read_dumy:%0x8,
> > + read_opcode:%08x]\n", nor->addr_width, nor->read_dummy,
> > + nor->read_opcode);
> > +
> > + for (i = 0; i<smpt_len; i++)
> > + pr_info("%s:%i smpt[%d]=%08x\n", __func__, __LINE__,
> > + i, smpt[i]);
> > +
> > map_id = 0;
> > - i = 0;
> > /* Determine if there are any optional Detection Command Descriptors */
> > - while (!(smpt[i] & SMPT_DESC_TYPE_MAP)) {
> > + for (i = 0; i< smpt_len; i++) {
>
> ^ i += 2) {
>
> > + if ((smpt[i] & SMPT_DESC_TYPE_MAP))
> > + break;
> > +
> > read_data_mask = SMPT_CMD_READ_DATA(smpt[i]);
> > nor->addr_width = spi_nor_smpt_addr_width(nor, smpt[i]);
> > nor->read_dummy = spi_nor_smpt_read_dummy(nor, smpt[i]);
> > nor->read_opcode = SMPT_CMD_OPCODE(smpt[i]);
> > + pr_info("smpt[%d]=[addr_width:%08x, read_dumy:%0x8,
> > + read_opcode:%08x]\n", i, nor->addr_width, nor->read_dummy,
> > + nor->read_opcode);
> > +
> > addr = smpt[i + 1];
> >
> > err = spi_nor_read_raw(nor, addr, 1, &data_byte); @@
> > -2894,18 +2904,36 @@ static const u32 *spi_nor_get_map_in_use(struct
> spi_nor *nor, const u32 *smpt)
> > * Configuration that is currently in use.
> > */
> > map_id = map_id << 1 | !!(data_byte & read_data_mask);
> > + map_id_is_valid = true;
> > i = i + 2;
>
> Drop the above line (i = i + 2).
>
[ 1.632190] Start [addr_width:00000000, read_dumy:08, read_opcode:00000000]
[ 1.639148] spi_nor_get_map_in_use:2882 smpt[0]=08ff65fc
[ 1.644451] spi_nor_get_map_in_use:2882 smpt[1]=00000004
[ 1.649755] spi_nor_get_map_in_use:2882 smpt[2]=04ff65fc
[ 1.655057] spi_nor_get_map_in_use:2882 smpt[3]=00000002
[ 1.660360] spi_nor_get_map_in_use:2882 smpt[4]=02ff65fd
[ 1.665662] spi_nor_get_map_in_use:2882 smpt[5]=00000004
[ 1.670965] spi_nor_get_map_in_use:2882 smpt[6]=ff0201fe
[ 1.676267] spi_nor_get_map_in_use:2882 smpt[7]=00007ff1
[ 1.681571] spi_nor_get_map_in_use:2882 smpt[8]=00037ff4
[ 1.686874] spi_nor_get_map_in_use:2882 smpt[9]=03fbfff4
[ 1.692176] spi_nor_get_map_in_use:2882 smpt[10]=ff0203fe
[ 1.697566] spi_nor_get_map_in_use:2882 smpt[11]=03fbfff4
[ 1.702954] spi_nor_get_map_in_use:2882 smpt[12]=00037ff4
[ 1.708343] spi_nor_get_map_in_use:2882 smpt[13]=00007ff1
[ 1.713732] spi_nor_get_map_in_use:2882 smpt[14]=ff0005ff
[ 1.719120] spi_nor_get_map_in_use:2882 smpt[15]=03fffff4
[ 1.724509] smpt[0]=[addr_width:00000000, read_dumy:08, read_opcode:00000065]
[ 1.731650] smpt[1]=[addr_width:00000000, read_dumy:08, read_opcode:00000000]
[ 1.738791] smpt[2]=[addr_width:00000000, read_dumy:08, read_opcode:00000065]
[ 1.745932] spi_nor_get_map_in_use:2911 map_id=0 smpt_len:16 i=:3
[ 1.752018] End [addr_width:00000000, read_dumy:08, read_opcode:00000065]
Also, one more thing when we are returning from the function, we are over-writing the values of addr_widthm read_dummy and read_opcode.
Is this correct?
out:
nor->addr_width = addr_width;
nor->read_dummy = read_dummy;
nor->read_opcode = read_opcode;
return ret;
}
--
Regards
Yogesh Gaur
> > }
> >
> > - /* Find the matching configuration map */
> > - while (SMPT_MAP_ID(smpt[i]) != map_id) {
> > - if (smpt[i] & SMPT_DESC_END)
> > - goto out;
> > + if (map_id_is_valid)
> > + pr_info("%s:%i map_id=%d\n", __func__, __LINE__, map_id);
> > + else
> > + pr_info("%s:%i NO map_id\n", __func__, __LINE__);
> > +
> > + for (nmaps = 0; i< smpt_len; nmaps++) {
> > + if((smpt[i] & SMPT_DESC_TYPE_MAP))
> > + continue;
> > +
> > + if(!map_id_is_valid) {
> > + if (nmaps) {
> > + ret = NULL;
> > + break;
> > + }
> > +
> > + ret = smpt+i;
> > + } else if (map_id == SMPT_MAP_ID(smpt[i])) {
> > + ret = smpt+i;
> > + break;
> > + }
> > +
> > /* increment the table index to the next map */
> > i += SMPT_MAP_REGION_COUNT(smpt[i]) + 1;
> > }
> >
> > - ret = smpt + i;
> > + pr_info("End [addr_width:%08x, read_dumy:%0x8,
> > + read_opcode:%08x]\n", nor->addr_width, nor->read_dummy,
> > + nor->read_opcode);
> > /* fall through */
> > out:
> > nor->addr_width = addr_width;
Powered by blists - more mailing lists