| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181023110122.27f73100@bbrezillon>
Date: Tue, 23 Oct 2018 11:01:22 +0200
From: Boris Brezillon <boris.brezillon@...tlin.com>
To: Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
Cc: "Cristian.Birsan@...rochip.com" <Cristian.Birsan@...rochip.com>,
Tudor Ambarus <tudor.ambarus@...rochip.com>,
"richard@....at" <richard@....at>, Mark Brown <broonie@...nel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"nicolas.ferre@...rochip.com" <nicolas.ferre@...rochip.com>,
"marek.vasut@...il.com" <marek.vasut@...il.com>,
"cyrille.pitchen@...rochip.com" <cyrille.pitchen@...rochip.com>,
"linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"dwmw2@...radead.org" <dwmw2@...radead.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP
SPI NOR flash memories
On Tue, 23 Oct 2018 10:48:27 +0200
Boris Brezillon <boris.brezillon@...tlin.com> wrote:
> On Tue, 23 Oct 2018 08:18:35 +0000
> Yogesh Narayan Gaur <yogeshnarayan.gaur@....com> wrote:
>
> >
> > I have added the prints in m25p80_read() and in flexspi controller prepare_lut and read_rxfifo() func.
> > In these have added prints for data variable of struct op and data which being read by the controller from the flash.
> >
> > [ 2.091467] smpt[0]=[addr_width:00000003, read_dumy:00000008, read_opcode:00000065, data_mask:00000008]
> > [ 2.099113] m25p80_read, nor[op:00000065 addr_width:00000003, dummy:00000008, len:00000001
> > [ 2.107367] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:4, nbytes:3, bwidth:1]
> > [ 2.114753] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1, nbytes:1]
> > [ 2.121706] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:4, nbytes:3, bwidth:1]
> > [ 2.129786] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > [ 2.136132] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465 1:24003008 2:0 3:0]
> > [ 2.144223] nxp_fspi_read_rxfifo, ReadData op.buf[0x00]
> > [ 2.151004] smpt_read[1] addr[00000004], data_byte[00000000] err:00000000
> >
> >
> > [ 2.157782] smpt[2]=[addr_width:00000003, read_dumy:00000008, read_opcode:00000065, data_mask:00000004]
> > [ 2.165429] m25p80_read, nor[op:00000065 addr_width:00000003, dummy:00000008, len:00000001
> > [ 2.173683] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:2, nbytes:3, bwidth:1]
> > [ 2.181068] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1, nbytes:1]
> > [ 2.188021] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:2, nbytes:3, bwidth:1]
> > [ 2.196101] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > [ 2.202447] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465 1:24003008 2:0 3:0]
> > [ 2.210539] nxp_fspi_read_rxfifo, ReadData op.buf[0x02]
> > [ 2.217319] smpt_read[3] addr[00000002], data_byte[00000002] err:00000000
> >
> >
> > [ 2.224098] smpt[4]=[addr_width:00000003, read_dumy:00000008, read_opcode:00000065, data_mask:00000002]
> > [ 2.231744] m25p80_read, nor[op:00000065 addr_width:00000003, dummy:00000008, len:00000001
> > [ 2.239998] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:4, nbytes:3, bwidth:1]
> > [ 2.247383] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1, nbytes:1]
> > [ 2.254336] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:4, nbytes:3, bwidth:1]
> > [ 2.262416] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > [ 2.268762] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465 1:24003008 2:0 3:0]
> > [ 2.276854] nxp_fspi_read_rxfifo, ReadData op.buf[0x00]
> > [ 2.283634] smpt_read[5] addr[00000004], data_byte[00000000] err:00000000
> >
> >
> > [ 2.290412] spi_nor_get_map_in_use:2915 map_id=0 smpt_len:16 i=:6
> > [ 2.296496] End [addr_width:00000003, read_dumy:00000008, read_opcode:00000065] ReturnVal:00000000
> > [ 2.305444] spi_nor_parse_smpt:3065
> > [ 2.308924] m25p80 spi0.0: failed to parse SMPT (err = -22)
> >
> >
> > >
> > > Next thing you can do is read the CR2NV reg (using the RDAR command) and
> > > check the RL (Read Latency) and AL (Address Length) values.
> >
> > Please let me know how to read CR2NV register.
>
> Actually, RDAR is already what you use to read the map_id, and we need
> to use it to read the register that contains the number of dummy cycles
> and the number of address bytes to use for RDAR operations. Looks like
> we have a chicken and egg situation here :-).
>
> Let's try something else:
>
> 1/ create an u8 array of 16 entries named data_bytes
>
> for each loop iteration (the first for loop):
> 2/ set ->addr_width to 3 and ->read_dummy to 0
> 3/ call spi_nor_read_raw(nor, addr, ARRAY_SIZE(data_bytes), data_bytes)
> 4/ dump the data_bytes buf
> 5/ set ->addr_width to 4
> 6/ call spi_nor_read_raw(nor, addr, ARRAY_SIZE(data_bytes), data_bytes)
> 7/ dump the data_bytes buf
>
> If the SPI driver is working correctly, we should be able to figure out
> the right value for ->addr_width and ->read_dummy.
Also, can you add traces in nxp_fspi_read_rxfifo() to print the value
returned by f->read(base + FSPI_RFDR + j * 4) (there are 2 of them).
Powered by blists - more mailing lists