lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Tue, 23 Oct 2018 09:05:23 +0000
From:   Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
To:     Boris Brezillon <boris.brezillon@...tlin.com>
CC:     "Cristian.Birsan@...rochip.com" <Cristian.Birsan@...rochip.com>,
        Tudor Ambarus <tudor.ambarus@...rochip.com>,
        "richard@....at" <richard@....at>, Mark Brown <broonie@...nel.org>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "nicolas.ferre@...rochip.com" <nicolas.ferre@...rochip.com>,
        "marek.vasut@...il.com" <marek.vasut@...il.com>,
        "cyrille.pitchen@...rochip.com" <cyrille.pitchen@...rochip.com>,
        "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
        Cyrille Pitchen <cyrille.pitchen@...ev4u.fr>,
        "computersforpeace@...il.com" <computersforpeace@...il.com>,
        "dwmw2@...radead.org" <dwmw2@...radead.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>
Subject: RE: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI
 NOR flash memories

Hi,

> -----Original Message-----
> From: Boris Brezillon [mailto:boris.brezillon@...tlin.com]
> Sent: Tuesday, October 23, 2018 2:31 PM
> To: Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
> Cc: Cristian.Birsan@...rochip.com; Tudor Ambarus
> <tudor.ambarus@...rochip.com>; richard@....at; Mark Brown
> <broonie@...nel.org>; linux-kernel@...r.kernel.org;
> nicolas.ferre@...rochip.com; marek.vasut@...il.com;
> cyrille.pitchen@...rochip.com; linux-mtd@...ts.infradead.org; Cyrille Pitchen
> <cyrille.pitchen@...ev4u.fr>; computersforpeace@...il.com;
> dwmw2@...radead.org; linux-arm-kernel@...ts.infradead.org
> Subject: Re: [PATCH v3 1/2] mtd: spi-nor: add support to non-uniform SFDP SPI
> NOR flash memories
> 
> On Tue, 23 Oct 2018 10:48:27 +0200
> Boris Brezillon <boris.brezillon@...tlin.com> wrote:
> 
> > On Tue, 23 Oct 2018 08:18:35 +0000
> > Yogesh Narayan Gaur <yogeshnarayan.gaur@....com> wrote:
> >
> > >
> > > I have added the prints in m25p80_read() and in flexspi controller prepare_lut
> and read_rxfifo() func.
> > > In these have added prints for data variable of struct op and data which
> being read by the controller from the flash.
> > >
> > > [    2.091467] smpt[0]=[addr_width:00000003, read_dumy:00000008,
> read_opcode:00000065, data_mask:00000008]
> > > [    2.099113] m25p80_read, nor[op:00000065 addr_width:00000003,
> dummy:00000008, len:00000001
> > > [    2.107367] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:4, nbytes:3,
> bwidth:1]
> > > [    2.114753] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,
> nbytes:1]
> > > [    2.121706] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:4,
> nbytes:3, bwidth:1]
> > > [    2.129786] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > > [    2.136132] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465
> 1:24003008      2:0     3:0]
> > > [    2.144223] nxp_fspi_read_rxfifo, ReadData op.buf[0x00]
> > > [    2.151004] smpt_read[1] addr[00000004], data_byte[00000000]
> err:00000000
> > >
> > >
> > > [    2.157782] smpt[2]=[addr_width:00000003, read_dumy:00000008,
> read_opcode:00000065, data_mask:00000004]
> > > [    2.165429] m25p80_read, nor[op:00000065 addr_width:00000003,
> dummy:00000008, len:00000001
> > > [    2.173683] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:2, nbytes:3,
> bwidth:1]
> > > [    2.181068] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,
> nbytes:1]
> > > [    2.188021] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:2,
> nbytes:3, bwidth:1]
> > > [    2.196101] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > > [    2.202447] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465
> 1:24003008      2:0     3:0]
> > > [    2.210539] nxp_fspi_read_rxfifo, ReadData op.buf[0x02]
> > > [    2.217319] smpt_read[3] addr[00000002], data_byte[00000002]
> err:00000000
> > >
> > >
> > > [    2.224098] smpt[4]=[addr_width:00000003, read_dumy:00000008,
> read_opcode:00000065, data_mask:00000002]
> > > [    2.231744] m25p80_read, nor[op:00000065 addr_width:00000003,
> dummy:00000008, len:00000001
> > > [    2.239998] m25p80_read, cmd[opcode:65 bwidth:1] aadr[val:4, nbytes:3,
> bwidth:1]
> > > [    2.247383] m25p80_read, dummy[nbytes:1 bwidth:1] data[bwidth:1,
> nbytes:1]
> > > [    2.254336] nxp_fspi_prepare_lut cmd[opcode:65 bwidth:1] aadr[val:4,
> nbytes:3, bwidth:1]
> > > [    2.262416] dummy[nbytes:1 bwidth:1] data[dir:0 bwidth:1, nbytes:1]
> > > [    2.268762] nxp-fspi 20c0000.flexspi: CMD[65] lutval[0:8180465
> 1:24003008      2:0     3:0]
> > > [    2.276854] nxp_fspi_read_rxfifo, ReadData op.buf[0x00]
> > > [    2.283634] smpt_read[5] addr[00000004], data_byte[00000000]
> err:00000000
> > >
> > >
> > > [    2.290412] spi_nor_get_map_in_use:2915 map_id=0 smpt_len:16 i=:6
> > > [    2.296496] End [addr_width:00000003, read_dumy:00000008,
> read_opcode:00000065] ReturnVal:00000000
> > > [    2.305444] spi_nor_parse_smpt:3065
> > > [    2.308924] m25p80 spi0.0: failed to parse SMPT (err = -22)
> > >
> > >
> > > >
> > > > Next thing you can do is read the CR2NV reg (using the RDAR command)
> and
> > > > check the RL (Read Latency) and AL (Address Length) values.
> > >
> > > Please let me know how to read CR2NV register.
> >
> > Actually, RDAR is already what you use to read the map_id, and we need
> > to use it to read the register that contains the number of dummy
> > cycles and the number of address bytes to use for RDAR operations.
> > Looks like we have a chicken and egg situation here :-).
> >
> > Let's try something else:
> >
> > 1/ create an u8 array of 16 entries named data_bytes
> >
> > for each loop iteration (the first for loop):
> > 2/ set ->addr_width to 3 and ->read_dummy to 0 3/ call
> > spi_nor_read_raw(nor, addr, ARRAY_SIZE(data_bytes), data_bytes) 4/
> > dump the data_bytes buf 5/ set ->addr_width to 4 6/ call
> > spi_nor_read_raw(nor, addr, ARRAY_SIZE(data_bytes), data_bytes) 7/
> > dump the data_bytes buf
> >
> > If the SPI driver is working correctly, we should be able to figure
> > out the right value for ->addr_width and ->read_dummy.
> 
> Also, can you add traces in nxp_fspi_read_rxfifo() to print the value returned by
> f->read(base + FSPI_RFDR + j * 4) (there are 2 of them).

I have added this and printing the data content, all 4 bytes, after each f->read(base + FSPI_RFDR + j * 4);
This I have shown in the logs, only 1 byte i.e. as we are reading only 1 byte so I have deleted content of rest 3 bytes when sending the logs in mail.

--
Regards
Yogesh gaur

Powered by blists - more mailing lists