[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1540287311-1572-1-git-send-email-yogeshnarayan.gaur@nxp.com>
Date: Tue, 23 Oct 2018 09:37:00 +0000
From: Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
To: "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
"boris.brezillon@...tlin.com" <boris.brezillon@...tlin.com>,
"broonie@...nel.org" <broonie@...nel.org>,
"marek.vasut@...il.com" <marek.vasut@...il.com>,
"vigneshr@...com" <vigneshr@...com>,
"linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
CC: "robh@...nel.org" <robh@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"shawnguo@...nel.org" <shawnguo@...nel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"computersforpeace@...il.com" <computersforpeace@...il.com>,
"frieder.schrempf@...eet.de" <frieder.schrempf@...eet.de>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
Subject: [PATCH v3 0/7] spi: add support for octo mode
Add support for octo mode IO data transfer.
Micron flash, mt35xu512aba, supports octal mode data transfer and
NXP FlexSPI controller supports 8 data lines for data transfer (Rx/Tx).
Patch series
* Add support for octo mode flags and parsing of same in spi driver.
* Add parsing logic for spi-mem framework and m25p80.c device file.
* Add opcodes for octo I/O commands in spi-nor framework, Read and Write proto for (1-1-8/1-8-8) mode.
Opcodes are added as per octal data IO commands required for mt35xu512aba [1] flash.
* Add mode bit required for octo mode in nxp-fspi driver [2].
* Define binding property 'spi-rx/tx-bus-width' for LX2160ARDB target [2].
Cherry pick below 2 patches (from: https://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git):
c639f871febe6667d9afce28108c634e5636c735 spi: spi-mem: Fix inverted logic in op sanity check
db122eb8a749a1eff038f9a282c620ab16c4be1d spi: spi-mem: Add extra sanity checks on the op param
Tested on LX2160ARDB target with nxp-fspi driver, below are
Read performance number of 1-1-1 and 1-1-8 read protocol.
root@...x:~# cat /proc/mtd
dev: size erasesize name
mtd0: 04000000 00001000 "spi0.0"
mtd1: 04000000 00001000 "spi0.1"
root@...x:~# time mtd_debug read /dev/mtd0 0x0 0x1000000 0read
Copied 16777216 bytes from address 0x00000000 in flash to 0read
real 0m2.792s
user 0m0.000s
sys 0m2.790s
root@...x:~# time mtd_debug read /dev/mtd1 0x0 0x1000000 0read
Copied 16777216 bytes from address 0x00000000 in flash to 0read
real 0m0.441s
user 0m0.000s
sys 0m0.440s
root@...012ardb:~#
Flash device MTD0 configured in 1-1-1 protocol.
Flash device MTD1 configured in 1-1-8 protocol.
[1] https://patchwork.ozlabs.org/project/linux-mtd/list/?series=70384
[2] https://patchwork.ozlabs.org/project/linux-mtd/list/?series=72181
Yogesh Gaur (7):
spi: add support for octo mode I/O data transfer
spi: spi-mem: add support for octo mode I/O data transfer
mtd: spi-nor: add opcodes for octo Read/Write commands
mtd: spi-nor: add octo read flag for flash mt35xu512aba
mtd: m25p80: add support of octo mode I/O transfer
spi: nxp-fspi: add octo mode flag bit for octal support
arm64: dts: lx2160a: update fspi node
Changes for v3:
- Add octo mode support in spi_setup().
- Rename all patches with 'octal' string modified as 'octo'.
Changes for v2:
- Incorporated review comments of Boris and Vignesh.
arch/arm64/boot/dts/freescale/fsl-lx2160a-rdb.dts | 4 ++++
drivers/mtd/devices/m25p80.c | 9 ++++++++-
drivers/mtd/spi-nor/spi-nor.c | 15 ++++++++++++++-
drivers/spi/spi-mem.c | 9 ++++++++-
drivers/spi/spi-nxp-fspi.c | 4 ++--
drivers/spi/spi.c | 12 ++++++++++--
include/linux/mtd/spi-nor.h | 8 ++++++++
include/linux/spi/spi.h | 2 ++
8 files changed, 56 insertions(+), 7 deletions(-)
--
2.7.4
Powered by blists - more mailing lists