linux-kernel - [PATCH v3 1/7] spi: add support for octo mode I/O data transfer

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1540287311-1572-2-git-send-email-yogeshnarayan.gaur@nxp.com>
Date:   Tue, 23 Oct 2018 09:37:06 +0000
From:   Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
To:     "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
        "boris.brezillon@...tlin.com" <boris.brezillon@...tlin.com>,
        "broonie@...nel.org" <broonie@...nel.org>,
        "marek.vasut@...il.com" <marek.vasut@...il.com>,
        "vigneshr@...com" <vigneshr@...com>,
        "linux-spi@...r.kernel.org" <linux-spi@...r.kernel.org>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
CC:     "robh@...nel.org" <robh@...nel.org>,
        "mark.rutland@....com" <mark.rutland@....com>,
        "shawnguo@...nel.org" <shawnguo@...nel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        "computersforpeace@...il.com" <computersforpeace@...il.com>,
        "frieder.schrempf@...eet.de" <frieder.schrempf@...eet.de>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Yogesh Narayan Gaur <yogeshnarayan.gaur@....com>
Subject: [PATCH v3 1/7] spi: add support for octo mode I/O data transfer

Add flags for Octo mode I/O data transfer
Required for the SPI controller which can do the data transfer (TX/RX)
on 8 data lines e.g. NXP FlexSPI controller.
 SPI_TX_OCTO: transmit with 8 wires
 SPI_RX_OCTO: receive with 8 wires

Signed-off-by: Yogesh Gaur <yogeshnarayan.gaur@....com>
---
Changes for v3:
- Modified string 'octal' with 'octo'.
- Add octo mode support in spi_setup().
Changes for v2:
- Incorporated review comments of Boris.

 drivers/spi/spi.c       | 12 ++++++++++--
 include/linux/spi/spi.h |  2 ++
 2 files changed, 12 insertions(+), 2 deletions(-)

diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c
index ec395a6..6d57fa7 100644
--- a/drivers/spi/spi.c
+++ b/drivers/spi/spi.c
@@ -1573,6 +1573,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 		case 4:
 			spi->mode |= SPI_TX_QUAD;
 			break;
+		case 8:
+			spi->mode |= SPI_TX_OCTO;
+			break;
 		default:
 			dev_warn(&ctlr->dev,
 				"spi-tx-bus-width %d not supported\n",
@@ -1591,6 +1594,9 @@ static int of_spi_parse_dt(struct spi_controller *ctlr, struct spi_device *spi,
 		case 4:
 			spi->mode |= SPI_RX_QUAD;
 			break;
+		case 8:
+			spi->mode |= SPI_RX_OCTO;
+			break;
 		default:
 			dev_warn(&ctlr->dev,
 				"spi-rx-bus-width %d not supported\n",
@@ -2770,14 +2776,16 @@ int spi_setup(struct spi_device *spi)
 	/* if it is SPI_3WIRE mode, DUAL and QUAD should be forbidden
 	 */
 	if ((spi->mode & SPI_3WIRE) && (spi->mode &
-		(SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD)))
+		(SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTO |
+		 SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTO)))
 		return -EINVAL;
 	/* help drivers fail *cleanly* when they need options
 	 * that aren't supported with their current controller
 	 */
 	bad_bits = spi->mode & ~spi->controller->mode_bits;
 	ugly_bits = bad_bits &
-		    (SPI_TX_DUAL | SPI_TX_QUAD | SPI_RX_DUAL | SPI_RX_QUAD);
+		    (SPI_TX_DUAL | SPI_TX_QUAD | SPI_TX_OCTO |
+		     SPI_RX_DUAL | SPI_RX_QUAD | SPI_RX_OCTO);
 	if (ugly_bits) {
 		dev_warn(&spi->dev,
 			 "setup: ignoring unsupported mode bits %x\n",
diff --git a/include/linux/spi/spi.h b/include/linux/spi/spi.h
index a64235e..cea4e49 100644
--- a/include/linux/spi/spi.h
+++ b/include/linux/spi/spi.h
@@ -163,6 +163,8 @@ struct spi_device {
 #define	SPI_TX_QUAD	0x200			/* transmit with 4 wires */
 #define	SPI_RX_DUAL	0x400			/* receive with 2 wires */
 #define	SPI_RX_QUAD	0x800			/* receive with 4 wires */
+#define	SPI_TX_OCTO	0x1000			/* transmit with 8 wires */
+#define	SPI_RX_OCTO	0x2000			/* receive with 8 wires */
 	int			irq;
 	void			*controller_state;
 	void			*controller_data;
-- 
2.7.4