linux-kernel - Re: [PATCH v2 2/6] drm/panel: simple: Support panels with HPD where HPD isn't connected

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20181026144111.GQ154160@art_vandelay>
Date:   Fri, 26 Oct 2018 10:41:11 -0400
From:   Sean Paul <sean@...rly.run>
To:     Douglas Anderson <dianders@...omium.org>
Cc:     Sean Paul <seanpaul@...omium.org>,
        Thierry Reding <thierry.reding@...il.com>,
        Sandeep Panda <spanda@...eaurora.org>,
        linux-arm-msm@...r.kernel.org,
        Laurent Pinchart <laurent.pinchart@...asonboard.com>,
        jsanka@...eaurora.org, ryandcase@...omium.org,
        David Airlie <airlied@...ux.ie>,
        dri-devel@...ts.freedesktop.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2 2/6] drm/panel: simple: Support panels with HPD where
 HPD isn't connected

On Thu, Oct 25, 2018 at 03:21:30PM -0700, Douglas Anderson wrote:
> Some eDP panels that are designed to be always connected to a board
> use their HPD signal to signal that they've finished powering on and
> they're ready to be talked to.
> 
> However, for various reasons it's possible that the HPD signal from
> the panel isn't actually hooked up.  In the case where the HPD isn't
> hooked up you can look at the timing diagram on the panel datasheet
> and insert a delay for the maximum amount of time that the HPD might
> take to come up.
> 
> Let's add support in simple-panel for this concept.
> 
> At the moment we will co-opt the existing "prepare" delay to keep
> track of the delay and we'll use a boolean to specify that a given
> panel should only apply the delay if the "no-hpd" property was
> specified.
> 
> Signed-off-by: Douglas Anderson <dianders@...omium.org>

Reviewed-by: Sean Paul <sean@...rly.run>

> ---
> 
> Changes in v2:
> - Use "hpd_absent_delay" property instead of a bool + prepare delay
> 
>  drivers/gpu/drm/panel/panel-simple.c | 14 ++++++++++++--
>  1 file changed, 12 insertions(+), 2 deletions(-)
> 
> diff --git a/drivers/gpu/drm/panel/panel-simple.c b/drivers/gpu/drm/panel/panel-simple.c
> index 97964f7f2ace..687fd087b9fc 100644
> --- a/drivers/gpu/drm/panel/panel-simple.c
> +++ b/drivers/gpu/drm/panel/panel-simple.c
> @@ -56,6 +56,8 @@ struct panel_desc {
>  	/**
>  	 * @prepare: the time (in milliseconds) that it takes for the panel to
>  	 *           become ready and start receiving video data
> +	 * @hpd_absent_delay: Add this to the prepare delay if we know Hot
> +	 *                    Plug Detect isn't used.
>  	 * @enable: the time (in milliseconds) that it takes for the panel to
>  	 *          display the first valid frame after starting to receive
>  	 *          video data
> @@ -66,6 +68,7 @@ struct panel_desc {
>  	 */
>  	struct {
>  		unsigned int prepare;
> +		unsigned int hpd_absent_delay;
>  		unsigned int enable;
>  		unsigned int disable;
>  		unsigned int unprepare;
> @@ -79,6 +82,7 @@ struct panel_simple {
>  	struct drm_panel base;
>  	bool prepared;
>  	bool enabled;
> +	bool no_hpd;
>  
>  	const struct panel_desc *desc;
>  
> @@ -202,6 +206,7 @@ static int panel_simple_unprepare(struct drm_panel *panel)
>  static int panel_simple_prepare(struct drm_panel *panel)
>  {
>  	struct panel_simple *p = to_panel_simple(panel);
> +	unsigned int delay;
>  	int err;
>  
>  	if (p->prepared)
> @@ -215,8 +220,11 @@ static int panel_simple_prepare(struct drm_panel *panel)
>  
>  	gpiod_set_value_cansleep(p->enable_gpio, 1);
>  
> -	if (p->desc->delay.prepare)
> -		msleep(p->desc->delay.prepare);
> +	delay = p->desc->delay.prepare;
> +	if (p->no_hpd)
> +		delay += p->desc->delay.hpd_absent_delay;
> +	if (delay)
> +		msleep(delay);
>  
>  	p->prepared = true;
>  
> @@ -305,6 +313,8 @@ static int panel_simple_probe(struct device *dev, const struct panel_desc *desc)
>  	panel->prepared = false;
>  	panel->desc = desc;
>  
> +	panel->no_hpd = of_property_read_bool(dev->of_node, "no-hpd");
> +
>  	panel->supply = devm_regulator_get(dev, "power");
>  	if (IS_ERR(panel->supply))
>  		return PTR_ERR(panel->supply);
> -- 
> 2.19.1.568.g152ad8e336-goog
> 

-- 
Sean Paul, Software Engineer, Google / Chromium OS