linux-kernel - Re: [PATCH 1/2] pwm: kconfig: enable kona pwm to be built for cygnus arch

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Date:   Fri, 9 Nov 2018 10:58:41 +0100
From:   Clément Péron <peron.clem@...il.com>
To:     Thierry Reding <thierry.reding@...il.com>
Cc:     Scott Branden <scott.branden@...adcom.com>,
        u.kleine-koenig@...gutronix.de,
        Florian Fainelli <f.fainelli@...il.com>,
        Ray Jui <rjui@...adcom.com>,
        Scott Branden <sbranden@...adcom.com>,
        bcm-kernel-feedback-list@...adcom.com, linux-pwm@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/2] pwm: kconfig: enable kona pwm to be built for cygnus arch

Hi Thierry,

On Thu, 8 Nov 2018 at 13:22, Thierry Reding <thierry.reding@...il.com> wrote:
>
> On Thu, Nov 08, 2018 at 11:47:53AM +0100, Clément Péron wrote:
> > Hi Uwe, Scott,
> >
> > On Wed, 7 Nov 2018 at 17:48, Scott Branden <scott.branden@...adcom.com> wrote:
> > >
> > >
> > > On 2018-11-07 8:12 a.m., Uwe Kleine-König wrote:
> > > > On Wed, Nov 07, 2018 at 10:36:12AM +0100, Clément Péron wrote:
> > > >> The Cygnus architecture use a Kona PWM. This is already present
> > > >> in the device tree but can't be built actually. Hence, allow the
> > > >> Kona PWM to be built for Cygnus arch.
> > > >>
> > > >> Signed-off-by: Clément Péron <peron.clem@...il.com>
> > > >> ---
> > > >>   drivers/pwm/Kconfig | 3 ++-
> > > >>   1 file changed, 2 insertions(+), 1 deletion(-)
> > > >>
> > > >> diff --git a/drivers/pwm/Kconfig b/drivers/pwm/Kconfig
> > > >> index 763ee50ea57d..76d56fc8b1b7 100644
> > > >> --- a/drivers/pwm/Kconfig
> > > >> +++ b/drivers/pwm/Kconfig
> > > >> @@ -88,7 +88,8 @@ config PWM_BCM_IPROC
> > > >>
> > > >>   config PWM_BCM_KONA
> > > >>      tristate "Kona PWM support"
> > > >> -    depends on ARCH_BCM_MOBILE
> > > >> +    depends on ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS
> > > >> +    default ARCH_BCM_CYGNUS
> > > > Is it possible to build this driver also on other arches? Then you might
> > > > want to consider
> > > >
> > > >       depends on ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS || COMPILE_TEST
> > > good idea to add the COMPILE_TEST just to increase compile coverage
> >
> > Will Do.
>
> This is known to potentially break builds on things like UM where we
> have !HAS_IOMEM. Please make sure you thoroughly build-test before you
> switch on COMPILE_TEST.

Thanks for the point, so something like this (but maybe it's too
protective no ?) :

config PWM_BCM_KONA
        tristate "Kona PWM support"
        depends on ARCH_BCM_MOBILE || ARCH_BCM_CYGNUS || COMPILE_TEST
        depends on COMMON_CLK && HAS_IOMEM && OF
        default ARCH_BCM_CYGNUS

Regards,
Clement


>
> Thierry