| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181113090354.GO29768@piout.net>
Date: Tue, 13 Nov 2018 10:03:54 +0100
From: Alexandre Belloni <alexandre.belloni@...tlin.com>
To: Nicolas Ferre <nicolas.ferre@...rochip.com>,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v3 2/7] ARM: dts: at91: sama5d2: switch to new binding
On 13/11/2018 09:27:09+0100, Ludovic Desroches wrote:
> clock is missing in the title of this patch.
>
I fixed it up in place and pushed the at91-dt branch. Thanks!
> Regards
>
> Ludovic
>
> On Mon, Nov 12, 2018 at 02:31:03PM +0100, Alexandre Belloni wrote:
> > Switch sama5d2 boards to the new PMC clock bindings.
> >
> > Signed-off-by: Alexandre Belloni <alexandre.belloni@...tlin.com>
> > ---
> > arch/arm/boot/dts/at91-sama5d27_som1_ek.dts | 12 +-
> > arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts | 2 +-
> > arch/arm/boot/dts/at91-sama5d2_xplained.dts | 4 +-
> > arch/arm/boot/dts/sama5d2.dtsi | 670 ++------------------
> > 4 files changed, 69 insertions(+), 619 deletions(-)
> >
> > diff --git a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> > index 363a43d77424..4a258867ddf1 100644
> > --- a/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> > +++ b/arch/arm/boot/dts/at91-sama5d27_som1_ek.dts
> > @@ -165,7 +165,7 @@
> > dma-names = "tx", "rx";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - clocks = <&flx1_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_mikrobus_i2c>;
> > atmel,fifo-size = <16>;
> > @@ -211,7 +211,7 @@
> > compatible = "atmel,at91sam9260-usart";
> > reg = <0x200 0x200>;
> > interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&flx3_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
> > clock-names = "usart";
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_flx3_default>;
> > @@ -223,7 +223,7 @@
> > compatible = "atmel,at91rm9200-spi";
> > reg = <0x400 0x200>;
> > interrupts = <22 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&flx3_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
> > clock-names = "spi_clk";
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_flx3_default>;
> > @@ -240,7 +240,7 @@
> > compatible = "atmel,at91sam9260-usart";
> > reg = <0x200 0x200>;
> > interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&flx4_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
> > clock-names = "usart";
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_flx4_default>;
> > @@ -252,7 +252,7 @@
> > compatible = "atmel,at91rm9200-spi";
> > reg = <0x400 0x200>;
> > interrupts = <23 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&flx4_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
> > clock-names = "spi_clk";
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_mikrobus_spi &pinctrl_mikrobus1_spi_cs &pinctrl_mikrobus2_spi_cs>;
> > @@ -268,7 +268,7 @@
> > dma-names = "tx", "rx";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - clocks = <&flx4_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_flx4_default>;
> > atmel,fifo-size = <16>;
> > diff --git a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> > index 2214bfe7aa20..ba7f3e646c26 100644
> > --- a/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> > +++ b/arch/arm/boot/dts/at91-sama5d2_ptc_ek.dts
> > @@ -197,7 +197,7 @@
> > dma-names = "tx", "rx";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - clocks = <&flx0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_flx0_default>;
> > atmel,fifo-size = <16>;
> > diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> > index 518e2b095ccf..fa54e8866f1e 100644
> > --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> > +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
> > @@ -258,7 +258,7 @@
> > compatible = "atmel,at91sam9260-usart";
> > reg = <0x200 0x200>;
> > interrupts = <19 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&flx0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
> > clock-names = "usart";
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_flx0_default>;
> > @@ -313,7 +313,7 @@
> > dma-names = "tx", "rx";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - clocks = <&flx4_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
> > pinctrl-names = "default";
> > pinctrl-0 = <&pinctrl_flx4_default>;
> > atmel,fifo-size = <16>;
> > diff --git a/arch/arm/boot/dts/sama5d2.dtsi b/arch/arm/boot/dts/sama5d2.dtsi
> > index 843052f14f1c..6994774d97e0 100644
> > --- a/arch/arm/boot/dts/sama5d2.dtsi
> > +++ b/arch/arm/boot/dts/sama5d2.dtsi
> > @@ -84,7 +84,7 @@
> > compatible = "arm,coresight-etb10", "arm,primecell";
> > reg = <0x740000 0x1000>;
> >
> > - clocks = <&mck>;
> > + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> > clock-names = "apb_pclk";
> >
> > in-ports {
> > @@ -100,7 +100,7 @@
> > compatible = "arm,coresight-etm3x", "arm,primecell";
> > reg = <0x73C000 0x1000>;
> >
> > - clocks = <&mck>;
> > + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> > clock-names = "apb_pclk";
> >
> > out-ports {
> > @@ -154,7 +154,7 @@
> > reg = <0x00300000 0x100000
> > 0xfc02c000 0x400>;
> > interrupts = <42 IRQ_TYPE_LEVEL_HIGH 2>;
> > - clocks = <&udphs_clk>, <&utmi>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 42>, <&pmc PMC_TYPE_CORE PMC_UTMI>;
> > clock-names = "pclk", "hclk";
> > status = "disabled";
> >
> > @@ -281,7 +281,7 @@
> > compatible = "atmel,at91rm9200-ohci", "usb-ohci";
> > reg = <0x00400000 0x100000>;
> > interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
> > - clocks = <&uhphs_clk>, <&uhphs_clk>, <&uhpck>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_PERIPHERAL 41>, <&pmc PMC_TYPE_SYSTEM 6>;
> > clock-names = "ohci_clk", "hclk", "uhpck";
> > status = "disabled";
> > };
> > @@ -290,7 +290,7 @@
> > compatible = "atmel,at91sam9g45-ehci", "usb-ehci";
> > reg = <0x00500000 0x100000>;
> > interrupts = <41 IRQ_TYPE_LEVEL_HIGH 2>;
> > - clocks = <&utmi>, <&uhphs_clk>;
> > + clocks = <&pmc PMC_TYPE_CORE PMC_UTMI>, <&pmc PMC_TYPE_PERIPHERAL 41>;
> > clock-names = "usb_clk", "ehci_clk";
> > status = "disabled";
> > };
> > @@ -314,7 +314,7 @@
> > 0x1 0x0 0x60000000 0x10000000
> > 0x2 0x0 0x70000000 0x10000000
> > 0x3 0x0 0x80000000 0x10000000>;
> > - clocks = <&mck>;
> > + clocks = <&pmc PMC_TYPE_CORE PMC_MCK>;
> > status = "disabled";
> >
> > nand_controller: nand-controller {
> > @@ -333,7 +333,7 @@
> > compatible = "atmel,sama5d2-sdhci";
> > reg = <0xa0000000 0x300>;
> > interrupts = <31 IRQ_TYPE_LEVEL_HIGH 0>;
> > - clocks = <&sdmmc0_hclk>, <&sdmmc0_gclk>, <&main>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 31>, <&pmc PMC_TYPE_GCK 31>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
> > clock-names = "hclock", "multclk", "baseclk";
> > status = "disabled";
> > };
> > @@ -342,7 +342,7 @@
> > compatible = "atmel,sama5d2-sdhci";
> > reg = <0xb0000000 0x300>;
> > interrupts = <32 IRQ_TYPE_LEVEL_HIGH 0>;
> > - clocks = <&sdmmc1_hclk>, <&sdmmc1_gclk>, <&main>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 32>, <&pmc PMC_TYPE_GCK 32>, <&pmc PMC_TYPE_CORE PMC_MAIN>;
> > clock-names = "hclock", "multclk", "baseclk";
> > status = "disabled";
> > };
> > @@ -362,7 +362,7 @@
> > compatible = "atmel,sama5d2-hlcdc";
> > reg = <0xf0000000 0x2000>;
> > interrupts = <45 IRQ_TYPE_LEVEL_HIGH 0>;
> > - clocks = <&lcdc_clk>, <&lcdck>, <&clk32k>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 45>, <&pmc PMC_TYPE_SYSTEM 3>, <&clk32k>;
> > clock-names = "periph_clk","sys_clk", "slow_clk";
> > status = "disabled";
> >
> > @@ -388,7 +388,7 @@
> > compatible = "atmel,sama5d2-isc";
> > reg = <0xf0008000 0x4000>;
> > interrupts = <46 IRQ_TYPE_LEVEL_HIGH 5>;
> > - clocks = <&isc_clk>, <&iscck>, <&isc_gclk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 46>, <&pmc PMC_TYPE_SYSTEM 18>, <&pmc PMC_TYPE_GCK 46>;
> > clock-names = "hclock", "iscck", "gck";
> > #clock-cells = <0>;
> > clock-output-names = "isc-mck";
> > @@ -398,7 +398,7 @@
> > ramc0: ramc@...0c000 {
> > compatible = "atmel,sama5d3-ddramc";
> > reg = <0xf000c000 0x200>;
> > - clocks = <&ddrck>, <&mpddr_clk>;
> > + clocks = <&pmc PMC_TYPE_SYSTEM 2>, <&pmc PMC_TYPE_PERIPHERAL 13>;
> > clock-names = "ddrck", "mpddr";
> > };
> >
> > @@ -407,7 +407,7 @@
> > reg = <0xf0010000 0x1000>;
> > interrupts = <6 IRQ_TYPE_LEVEL_HIGH 0>;
> > #dma-cells = <1>;
> > - clocks = <&dma0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 6>;
> > clock-names = "dma_clk";
> > };
> >
> > @@ -417,7 +417,7 @@
> > reg = <0xf0004000 0x1000>;
> > interrupts = <7 IRQ_TYPE_LEVEL_HIGH 0>;
> > #dma-cells = <1>;
> > - clocks = <&dma1_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 7>;
> > clock-names = "dma_clk";
> > };
> >
> > @@ -425,559 +425,9 @@
> > compatible = "atmel,sama5d2-pmc", "syscon";
> > reg = <0xf0014000 0x160>;
> > interrupts = <74 IRQ_TYPE_LEVEL_HIGH 7>;
> > - interrupt-controller;
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - #interrupt-cells = <1>;
> > -
> > - main_rc_osc: main_rc_osc {
> > - compatible = "atmel,at91sam9x5-clk-main-rc-osc";
> > - #clock-cells = <0>;
> > - interrupt-parent = <&pmc>;
> > - interrupts = <AT91_PMC_MOSCRCS>;
> > - clock-frequency = <12000000>;
> > - clock-accuracy = <100000000>;
> > - };
> > -
> > - main_osc: main_osc {
> > - compatible = "atmel,at91rm9200-clk-main-osc";
> > - #clock-cells = <0>;
> > - interrupt-parent = <&pmc>;
> > - interrupts = <AT91_PMC_MOSCS>;
> > - clocks = <&main_xtal>;
> > - };
> > -
> > - main: mainck {
> > - compatible = "atmel,at91sam9x5-clk-main";
> > - #clock-cells = <0>;
> > - interrupt-parent = <&pmc>;
> > - interrupts = <AT91_PMC_MOSCSELS>;
> > - clocks = <&main_rc_osc &main_osc>;
> > - };
> > -
> > - plla: pllack {
> > - compatible = "atmel,sama5d3-clk-pll";
> > - #clock-cells = <0>;
> > - interrupt-parent = <&pmc>;
> > - interrupts = <AT91_PMC_LOCKA>;
> > - clocks = <&main>;
> > - reg = <0>;
> > - atmel,clk-input-range = <12000000 12000000>;
> > - #atmel,pll-clk-output-range-cells = <4>;
> > - atmel,pll-clk-output-ranges = <600000000 1200000000 0 0>;
> > - };
> > -
> > - plladiv: plladivck {
> > - compatible = "atmel,at91sam9x5-clk-plldiv";
> > - #clock-cells = <0>;
> > - clocks = <&plla>;
> > - };
> > -
> > - audio_pll_frac: audiopll_fracck {
> > - compatible = "atmel,sama5d2-clk-audio-pll-frac";
> > - #clock-cells = <0>;
> > - clocks = <&main>;
> > - };
> > -
> > - audio_pll_pad: audiopll_padck {
> > - compatible = "atmel,sama5d2-clk-audio-pll-pad";
> > - #clock-cells = <0>;
> > - clocks = <&audio_pll_frac>;
> > - };
> > -
> > - audio_pll_pmc: audiopll_pmcck {
> > - compatible = "atmel,sama5d2-clk-audio-pll-pmc";
> > - #clock-cells = <0>;
> > - clocks = <&audio_pll_frac>;
> > - };
> > -
> > - utmi: utmick {
> > - compatible = "atmel,at91sam9x5-clk-utmi";
> > - #clock-cells = <0>;
> > - interrupt-parent = <&pmc>;
> > - interrupts = <AT91_PMC_LOCKU>;
> > - clocks = <&main>;
> > - };
> > -
> > - mck: masterck {
> > - compatible = "atmel,at91sam9x5-clk-master";
> > - #clock-cells = <0>;
> > - interrupt-parent = <&pmc>;
> > - interrupts = <AT91_PMC_MCKRDY>;
> > - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>;
> > - atmel,clk-output-range = <124000000 166000000>;
> > - atmel,clk-divisors = <1 2 4 3>;
> > - };
> > -
> > - h32ck: h32mxck {
> > - #clock-cells = <0>;
> > - compatible = "atmel,sama5d4-clk-h32mx";
> > - clocks = <&mck>;
> > - };
> > -
> > - usb: usbck {
> > - compatible = "atmel,at91sam9x5-clk-usb";
> > - #clock-cells = <0>;
> > - clocks = <&plladiv>, <&utmi>;
> > - };
> > -
> > - prog: progck {
> > - compatible = "atmel,at91sam9x5-clk-programmable";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - interrupt-parent = <&pmc>;
> > - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>;
> > -
> > - prog0: prog0 {
> > - #clock-cells = <0>;
> > - reg = <0>;
> > - interrupts = <AT91_PMC_PCKRDY(0)>;
> > - };
> > -
> > - prog1: prog1 {
> > - #clock-cells = <0>;
> > - reg = <1>;
> > - interrupts = <AT91_PMC_PCKRDY(1)>;
> > - };
> > -
> > - prog2: prog2 {
> > - #clock-cells = <0>;
> > - reg = <2>;
> > - interrupts = <AT91_PMC_PCKRDY(2)>;
> > - };
> > - };
> > -
> > - systemck {
> > - compatible = "atmel,at91rm9200-clk-system";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - ddrck: ddrck {
> > - #clock-cells = <0>;
> > - reg = <2>;
> > - clocks = <&mck>;
> > - };
> > -
> > - lcdck: lcdck {
> > - #clock-cells = <0>;
> > - reg = <3>;
> > - clocks = <&mck>;
> > - };
> > -
> > - uhpck: uhpck {
> > - #clock-cells = <0>;
> > - reg = <6>;
> > - clocks = <&usb>;
> > - };
> > -
> > - udpck: udpck {
> > - #clock-cells = <0>;
> > - reg = <7>;
> > - clocks = <&usb>;
> > - };
> > -
> > - pck0: pck0 {
> > - #clock-cells = <0>;
> > - reg = <8>;
> > - clocks = <&prog0>;
> > - };
> > -
> > - pck1: pck1 {
> > - #clock-cells = <0>;
> > - reg = <9>;
> > - clocks = <&prog1>;
> > - };
> > -
> > - pck2: pck2 {
> > - #clock-cells = <0>;
> > - reg = <10>;
> > - clocks = <&prog2>;
> > - };
> > -
> > - iscck: iscck {
> > - #clock-cells = <0>;
> > - reg = <18>;
> > - clocks = <&mck>;
> > - };
> > - };
> > -
> > - periph32ck {
> > - compatible = "atmel,at91sam9x5-clk-peripheral";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - clocks = <&h32ck>;
> > -
> > - macb0_clk: macb0_clk {
> > - #clock-cells = <0>;
> > - reg = <5>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - tdes_clk: tdes_clk {
> > - #clock-cells = <0>;
> > - reg = <11>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - matrix1_clk: matrix1_clk {
> > - #clock-cells = <0>;
> > - reg = <14>;
> > - };
> > -
> > - hsmc_clk: hsmc_clk {
> > - #clock-cells = <0>;
> > - reg = <17>;
> > - };
> > -
> > - pioA_clk: pioA_clk {
> > - #clock-cells = <0>;
> > - reg = <18>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - flx0_clk: flx0_clk {
> > - #clock-cells = <0>;
> > - reg = <19>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - flx1_clk: flx1_clk {
> > - #clock-cells = <0>;
> > - reg = <20>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - flx2_clk: flx2_clk {
> > - #clock-cells = <0>;
> > - reg = <21>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - flx3_clk: flx3_clk {
> > - #clock-cells = <0>;
> > - reg = <22>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - flx4_clk: flx4_clk {
> > - #clock-cells = <0>;
> > - reg = <23>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - uart0_clk: uart0_clk {
> > - #clock-cells = <0>;
> > - reg = <24>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - uart1_clk: uart1_clk {
> > - #clock-cells = <0>;
> > - reg = <25>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - uart2_clk: uart2_clk {
> > - #clock-cells = <0>;
> > - reg = <26>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - uart3_clk: uart3_clk {
> > - #clock-cells = <0>;
> > - reg = <27>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - uart4_clk: uart4_clk {
> > - #clock-cells = <0>;
> > - reg = <28>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - twi0_clk: twi0_clk {
> > - reg = <29>;
> > - #clock-cells = <0>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - twi1_clk: twi1_clk {
> > - #clock-cells = <0>;
> > - reg = <30>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - spi0_clk: spi0_clk {
> > - #clock-cells = <0>;
> > - reg = <33>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - spi1_clk: spi1_clk {
> > - #clock-cells = <0>;
> > - reg = <34>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - tcb0_clk: tcb0_clk {
> > - #clock-cells = <0>;
> > - reg = <35>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - tcb1_clk: tcb1_clk {
> > - #clock-cells = <0>;
> > - reg = <36>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - pwm_clk: pwm_clk {
> > - #clock-cells = <0>;
> > - reg = <38>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - adc_clk: adc_clk {
> > - #clock-cells = <0>;
> > - reg = <40>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - uhphs_clk: uhphs_clk {
> > - #clock-cells = <0>;
> > - reg = <41>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - udphs_clk: udphs_clk {
> > - #clock-cells = <0>;
> > - reg = <42>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - ssc0_clk: ssc0_clk {
> > - #clock-cells = <0>;
> > - reg = <43>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - ssc1_clk: ssc1_clk {
> > - #clock-cells = <0>;
> > - reg = <44>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - trng_clk: trng_clk {
> > - #clock-cells = <0>;
> > - reg = <47>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - pdmic_clk: pdmic_clk {
> > - #clock-cells = <0>;
> > - reg = <48>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - securam_clk: securam_clk {
> > - #clock-cells = <0>;
> > - reg = <51>;
> > - };
> > -
> > - i2s0_clk: i2s0_clk {
> > - #clock-cells = <0>;
> > - reg = <54>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - i2s1_clk: i2s1_clk {
> > - #clock-cells = <0>;
> > - reg = <55>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - can0_clk: can0_clk {
> > - #clock-cells = <0>;
> > - reg = <56>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - can1_clk: can1_clk {
> > - #clock-cells = <0>;
> > - reg = <57>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - classd_clk: classd_clk {
> > - #clock-cells = <0>;
> > - reg = <59>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > - };
> > -
> > - periph64ck {
> > - compatible = "atmel,at91sam9x5-clk-peripheral";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - clocks = <&mck>;
> > -
> > - dma0_clk: dma0_clk {
> > - #clock-cells = <0>;
> > - reg = <6>;
> > - };
> > -
> > - dma1_clk: dma1_clk {
> > - #clock-cells = <0>;
> > - reg = <7>;
> > - };
> > -
> > - aes_clk: aes_clk {
> > - #clock-cells = <0>;
> > - reg = <9>;
> > - };
> > -
> > - aesb_clk: aesb_clk {
> > - #clock-cells = <0>;
> > - reg = <10>;
> > - };
> > -
> > - sha_clk: sha_clk {
> > - #clock-cells = <0>;
> > - reg = <12>;
> > - };
> > -
> > - mpddr_clk: mpddr_clk {
> > - #clock-cells = <0>;
> > - reg = <13>;
> > - };
> > -
> > - matrix0_clk: matrix0_clk {
> > - #clock-cells = <0>;
> > - reg = <15>;
> > - };
> > -
> > - sdmmc0_hclk: sdmmc0_hclk {
> > - #clock-cells = <0>;
> > - reg = <31>;
> > - };
> > -
> > - sdmmc1_hclk: sdmmc1_hclk {
> > - #clock-cells = <0>;
> > - reg = <32>;
> > - };
> > -
> > - lcdc_clk: lcdc_clk {
> > - #clock-cells = <0>;
> > - reg = <45>;
> > - };
> > -
> > - isc_clk: isc_clk {
> > - #clock-cells = <0>;
> > - reg = <46>;
> > - };
> > -
> > - qspi0_clk: qspi0_clk {
> > - #clock-cells = <0>;
> > - reg = <52>;
> > - };
> > -
> > - qspi1_clk: qspi1_clk {
> > - #clock-cells = <0>;
> > - reg = <53>;
> > - };
> > - };
> > -
> > - gck {
> > - compatible = "atmel,sama5d2-clk-generated";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > - interrupt-parent = <&pmc>;
> > - clocks = <&clk32k>, <&main>, <&plladiv>, <&utmi>, <&mck>, <&audio_pll_pmc>;
> > -
> > - sdmmc0_gclk: sdmmc0_gclk {
> > - #clock-cells = <0>;
> > - reg = <31>;
> > - };
> > -
> > - sdmmc1_gclk: sdmmc1_gclk {
> > - #clock-cells = <0>;
> > - reg = <32>;
> > - };
> > -
> > - tcb0_gclk: tcb0_gclk {
> > - #clock-cells = <0>;
> > - reg = <35>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - tcb1_gclk: tcb1_gclk {
> > - #clock-cells = <0>;
> > - reg = <36>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - pwm_gclk: pwm_gclk {
> > - #clock-cells = <0>;
> > - reg = <38>;
> > - atmel,clk-output-range = <0 83000000>;
> > - };
> > -
> > - isc_gclk: isc_gclk {
> > - #clock-cells = <0>;
> > - reg = <46>;
> > - };
> > -
> > - pdmic_gclk: pdmic_gclk {
> > - #clock-cells = <0>;
> > - reg = <48>;
> > - };
> > -
> > - i2s0_gclk: i2s0_gclk {
> > - #clock-cells = <0>;
> > - reg = <54>;
> > - };
> > -
> > - i2s1_gclk: i2s1_gclk {
> > - #clock-cells = <0>;
> > - reg = <55>;
> > - };
> > -
> > - can0_gclk: can0_gclk {
> > - #clock-cells = <0>;
> > - reg = <56>;
> > - atmel,clk-output-range = <0 80000000>;
> > - };
> > -
> > - can1_gclk: can1_gclk {
> > - #clock-cells = <0>;
> > - reg = <57>;
> > - atmel,clk-output-range = <0 80000000>;
> > - };
> > -
> > - classd_gclk: classd_gclk {
> > - #clock-cells = <0>;
> > - reg = <59>;
> > - atmel,clk-output-range = <0 100000000>;
> > - };
> > - };
> > -
> > - i2s_clkmux {
> > - compatible = "atmel,sama5d2-clk-i2s-mux";
> > - #address-cells = <1>;
> > - #size-cells = <0>;
> > -
> > - i2s0muxck: i2s0_muxclk {
> > - clocks = <&i2s0_clk>, <&i2s0_gclk>;
> > - #clock-cells = <0>;
> > - reg = <0>;
> > - };
> > -
> > - i2s1muxck: i2s1_muxclk {
> > - clocks = <&i2s1_clk>, <&i2s1_gclk>;
> > - #clock-cells = <0>;
> > - reg = <1>;
> > - };
> > - };
> > + #clock-cells = <2>;
> > + clocks = <&clk32k>, <&main_xtal>;
> > + clock-names = "slow_clk", "main_xtal";
> > };
> >
> > qspi0: spi@...20000 {
> > @@ -985,7 +435,7 @@
> > reg = <0xf0020000 0x100>, <0xd0000000 0x08000000>;
> > reg-names = "qspi_base", "qspi_mmap";
> > interrupts = <52 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&qspi0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 52>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > status = "disabled";
> > @@ -996,7 +446,7 @@
> > reg = <0xf0024000 0x100>, <0xd8000000 0x08000000>;
> > reg-names = "qspi_base", "qspi_mmap";
> > interrupts = <53 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&qspi1_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 53>;
> > #address-cells = <1>;
> > #size-cells = <0>;
> > status = "disabled";
> > @@ -1010,7 +460,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(30))>;
> > dma-names = "tx";
> > - clocks = <&sha_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 12>;
> > clock-names = "sha_clk";
> > status = "okay";
> > };
> > @@ -1026,7 +476,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(27))>;
> > dma-names = "tx", "rx";
> > - clocks = <&aes_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 9>;
> > clock-names = "aes_clk";
> > status = "okay";
> > };
> > @@ -1042,7 +492,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(7))>;
> > dma-names = "tx", "rx";
> > - clocks = <&spi0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 33>;
> > clock-names = "spi_clk";
> > atmel,fifo-size = <16>;
> > #address-cells = <1>;
> > @@ -1061,7 +511,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(22))>;
> > dma-names = "tx", "rx";
> > - clocks = <&ssc0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 43>;
> > clock-names = "pclk";
> > status = "disabled";
> > };
> > @@ -1074,7 +524,7 @@
> > 67 IRQ_TYPE_LEVEL_HIGH 3>; /* Queue 2 */
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - clocks = <&macb0_clk>, <&macb0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 5>, <&pmc PMC_TYPE_PERIPHERAL 5>;
> > clock-names = "hclk", "pclk";
> > status = "disabled";
> > };
> > @@ -1085,7 +535,7 @@
> > #size-cells = <0>;
> > reg = <0xf800c000 0x100>;
> > interrupts = <35 IRQ_TYPE_LEVEL_HIGH 0>;
> > - clocks = <&tcb0_clk>, <&clk32k>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 35>, <&clk32k>;
> > clock-names = "t0_clk", "slow_clk";
> > };
> >
> > @@ -1095,7 +545,7 @@
> > #size-cells = <0>;
> > reg = <0xf8010000 0x100>;
> > interrupts = <36 IRQ_TYPE_LEVEL_HIGH 0>;
> > - clocks = <&tcb1_clk>, <&clk32k>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 36>, <&clk32k>;
> > clock-names = "t0_clk", "slow_clk";
> > };
> >
> > @@ -1103,7 +553,7 @@
> > compatible = "atmel,sama5d2-smc", "syscon", "simple-mfd";
> > reg = <0xf8014000 0x1000>;
> > interrupts = <17 IRQ_TYPE_LEVEL_HIGH 6>;
> > - clocks = <&hsmc_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 17>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges;
> > @@ -1123,7 +573,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1)
> > | AT91_XDMAC_DT_PERID(50))>;
> > dma-names = "rx";
> > - clocks = <&pdmic_clk>, <&pdmic_gclk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 48>, <&pmc PMC_TYPE_GCK 48>;
> > clock-names = "pclk", "gclk";
> > status = "disabled";
> > };
> > @@ -1139,7 +589,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(36))>;
> > dma-names = "tx", "rx";
> > - clocks = <&uart0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 24>;
> > clock-names = "usart";
> > status = "disabled";
> > };
> > @@ -1155,7 +605,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(38))>;
> > dma-names = "tx", "rx";
> > - clocks = <&uart1_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 25>;
> > clock-names = "usart";
> > status = "disabled";
> > };
> > @@ -1171,7 +621,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(40))>;
> > dma-names = "tx", "rx";
> > - clocks = <&uart2_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 26>;
> > clock-names = "usart";
> > status = "disabled";
> > };
> > @@ -1189,7 +639,7 @@
> > dma-names = "tx", "rx";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - clocks = <&twi0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 29>;
> > atmel,fifo-size = <16>;
> > status = "disabled";
> > };
> > @@ -1199,7 +649,7 @@
> > reg = <0xf802c000 0x4000>;
> > interrupts = <38 IRQ_TYPE_LEVEL_HIGH 7>;
> > #pwm-cells = <3>;
> > - clocks = <&pwm_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 38>;
> > };
> >
> > sfr: sfr@...30000 {
> > @@ -1210,7 +660,7 @@
> > flx0: flexcom@...34000 {
> > compatible = "atmel,sama5d2-flexcom";
> > reg = <0xf8034000 0x200>;
> > - clocks = <&flx0_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 19>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0x0 0xf8034000 0x800>;
> > @@ -1220,7 +670,7 @@
> > flx1: flexcom@...38000 {
> > compatible = "atmel,sama5d2-flexcom";
> > reg = <0xf8038000 0x200>;
> > - clocks = <&flx1_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 20>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0x0 0xf8038000 0x800>;
> > @@ -1230,7 +680,7 @@
> > securam: sram@...44000 {
> > compatible = "atmel,sama5d2-securam", "mmio-sram";
> > reg = <0xf8044000 0x1420>;
> > - clocks = <&securam_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 51>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0 0xf8044000 0x1420>;
> > @@ -1255,7 +705,7 @@
> > compatible = "atmel,at91sam9260-pit";
> > reg = <0xf8048030 0x10>;
> > interrupts = <3 IRQ_TYPE_LEVEL_HIGH 5>;
> > - clocks = <&h32ck>;
> > + clocks = <&pmc PMC_TYPE_CORE PMC_MCK2>;
> > };
> >
> > watchdog@...48040 {
> > @@ -1292,10 +742,10 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(32))>;
> > dma-names = "tx", "rx";
> > - clocks = <&i2s0_clk>, <&i2s0_gclk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 54>, <&pmc PMC_TYPE_GCK 54>;
> > clock-names = "pclk", "gclk";
> > - assigned-clocks = <&i2s0muxck>;
> > - assigned-clock-parents = <&i2s0_gclk>;
> > + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S0_MUX>;
> > + assigned-clock-parents = <&pmc PMC_TYPE_GCK 54>;
> > status = "disabled";
> > };
> >
> > @@ -1306,10 +756,10 @@
> > interrupts = <56 IRQ_TYPE_LEVEL_HIGH 7>,
> > <64 IRQ_TYPE_LEVEL_HIGH 7>;
> > interrupt-names = "int0", "int1";
> > - clocks = <&can0_clk>, <&can0_gclk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 56>, <&pmc PMC_TYPE_GCK 56>;
> > clock-names = "hclk", "cclk";
> > - assigned-clocks = <&can0_gclk>;
> > - assigned-clock-parents = <&utmi>;
> > + assigned-clocks = <&pmc PMC_TYPE_GCK 56>;
> > + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
> > assigned-clock-rates = <40000000>;
> > bosch,mram-cfg = <0x0 0 0 64 0 0 32 32>;
> > status = "disabled";
> > @@ -1326,7 +776,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(9))>;
> > dma-names = "tx", "rx";
> > - clocks = <&spi1_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 34>;
> > clock-names = "spi_clk";
> > atmel,fifo-size = <16>;
> > #address-cells = <1>;
> > @@ -1345,7 +795,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(42))>;
> > dma-names = "tx", "rx";
> > - clocks = <&uart3_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 27>;
> > clock-names = "usart";
> > status = "disabled";
> > };
> > @@ -1361,7 +811,7 @@
> > AT91_XDMAC_DT_PERID(44))>;
> > dma-names = "tx", "rx";
> > interrupts = <28 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&uart4_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 28>;
> > clock-names = "usart";
> > status = "disabled";
> > };
> > @@ -1369,7 +819,7 @@
> > flx2: flexcom@...10000 {
> > compatible = "atmel,sama5d2-flexcom";
> > reg = <0xfc010000 0x200>;
> > - clocks = <&flx2_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 21>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0x0 0xfc010000 0x800>;
> > @@ -1379,7 +829,7 @@
> > flx3: flexcom@...14000 {
> > compatible = "atmel,sama5d2-flexcom";
> > reg = <0xfc014000 0x200>;
> > - clocks = <&flx3_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 22>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0x0 0xfc014000 0x800>;
> > @@ -1389,7 +839,7 @@
> > flx4: flexcom@...18000 {
> > compatible = "atmel,sama5d2-flexcom";
> > reg = <0xfc018000 0x200>;
> > - clocks = <&flx4_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 23>;
> > #address-cells = <1>;
> > #size-cells = <1>;
> > ranges = <0x0 0xfc018000 0x800>;
> > @@ -1400,7 +850,7 @@
> > compatible = "atmel,at91sam9g45-trng";
> > reg = <0xfc01c000 0x100>;
> > interrupts = <47 IRQ_TYPE_LEVEL_HIGH 0>;
> > - clocks = <&trng_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 47>;
> > };
> >
> > aic: interrupt-controller@...20000 {
> > @@ -1424,7 +874,7 @@
> > dma-names = "tx", "rx";
> > #address-cells = <1>;
> > #size-cells = <0>;
> > - clocks = <&twi1_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 30>;
> > atmel,fifo-size = <16>;
> > status = "disabled";
> > };
> > @@ -1433,7 +883,7 @@
> > compatible = "atmel,sama5d2-adc";
> > reg = <0xfc030000 0x100>;
> > interrupts = <40 IRQ_TYPE_LEVEL_HIGH 7>;
> > - clocks = <&adc_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 40>;
> > clock-names = "adc_clk";
> > dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) | AT91_XDMAC_DT_PERID(25))>;
> > dma-names = "rx";
> > @@ -1466,7 +916,7 @@
> > #interrupt-cells = <2>;
> > gpio-controller;
> > #gpio-cells = <2>;
> > - clocks = <&pioA_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 18>;
> > };
> >
> > secumod@...40000 {
> > @@ -1485,7 +935,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(29))>;
> > dma-names = "tx", "rx";
> > - clocks = <&tdes_clk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 11>;
> > clock-names = "tdes_clk";
> > status = "okay";
> > };
> > @@ -1498,7 +948,7 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(47))>;
> > dma-names = "tx";
> > - clocks = <&classd_clk>, <&classd_gclk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 59>, <&pmc PMC_TYPE_GCK 59>;
> > clock-names = "pclk", "gclk";
> > status = "disabled";
> > };
> > @@ -1514,10 +964,10 @@
> > (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |
> > AT91_XDMAC_DT_PERID(34))>;
> > dma-names = "tx", "rx";
> > - clocks = <&i2s1_clk>, <&i2s1_gclk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 55>, <&pmc PMC_TYPE_GCK 55>;
> > clock-names = "pclk", "gclk";
> > - assigned-clocks = <&i2s1muxck>;
> > - assigned-parrents = <&i2s1_gclk>;
> > + assigned-clocks = <&pmc PMC_TYPE_CORE PMC_I2S1_MUX>;
> > + assigned-parrents = <&pmc PMC_TYPE_GCK 55>;
> > status = "disabled";
> > };
> >
> > @@ -1528,10 +978,10 @@
> > interrupts = <57 IRQ_TYPE_LEVEL_HIGH 7>,
> > <65 IRQ_TYPE_LEVEL_HIGH 7>;
> > interrupt-names = "int0", "int1";
> > - clocks = <&can1_clk>, <&can1_gclk>;
> > + clocks = <&pmc PMC_TYPE_PERIPHERAL 57>, <&pmc PMC_TYPE_GCK 57>;
> > clock-names = "hclk", "cclk";
> > - assigned-clocks = <&can1_gclk>;
> > - assigned-clock-parents = <&utmi>;
> > + assigned-clocks = <&pmc PMC_TYPE_GCK 57>;
> > + assigned-clock-parents = <&pmc PMC_TYPE_CORE PMC_UTMI>;
> > assigned-clock-rates = <40000000>;
> > bosch,mram-cfg = <0x1100 0 0 64 0 0 32 32>;
> > status = "disabled";
> > --
> > 2.19.1
> >
--
Alexandre Belloni, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
Powered by blists - more mailing lists