linux-kernel - Re: [PATCH v3 6/7] ARM: dts: at91: at91sam9x5: switch to new clock bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Date:   Sat, 27 Jul 2019 17:39:43 +0200
From:   Uwe Kleine-König 
        <u.kleine-koenig@...gutronix.de>
To:     Alexandre Belloni <alexandre.belloni@...tlin.com>
Cc:     Nicolas Ferre <nicolas.ferre@...rochip.com>,
        Ludovic Desroches <ludovic.desroches@...rochip.com>,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        info@...esystems.it
Subject: Re: [PATCH v3 6/7] ARM: dts: at91: at91sam9x5: switch to new clock
 bindings

Hello Alexandre,

On Mon, Nov 12, 2018 at 02:31:07PM +0100, Alexandre Belloni wrote:
> Switch at91sam9x5 boards to the new PMC clock bindings.

This patch results in a broken dtb for my AriettaG25[1]. It compiles
fine, but booting results in:

	SD/MMC: dt blob: Read file acme-arietta.dtb to 0x21000000
	SD: Card Capacity: Standard
	SD: Specification Version 3.0X

	Booting zImage ......
	zImage magic: 0x16f2818 is found

	Using device tree in place at 0x21000000

	Starting linux kernel ..., machid: 0xffffffff

	Uncompressing Linux... done, booting the kernel.
	Booting Linux on physical CPU 0x0
	Linux version 5.3.0-rc1+ (uwe@...rus) (gcc version 7.3.1 20180201 (OSELAS.Toolchain-2018.02.0 7-20180201)) #4 Sat Jul 27 15:47:15 CEST 2019
	CPU: ARM926EJ-S [41069265] revision 5 (ARMv5TEJ), cr=0005317f
	CPU: VIVT data cache, VIVT instruction cache
	OF: fdt: Machine model: Acme Systems Arietta G25
	printk: bootconsole [earlycon0] enabled
	printk: debug: ignoring loglevel setting.
	Memory policy: Data cache writeback
	On node 0 totalpages: 32768
	  Normal zone: 256 pages used for memmap
	  Normal zone: 0 pages reserved
	  Normal zone: 32768 pages, LIFO batch:7
	pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
	pcpu-alloc: [0] 0 
	Built 1 zonelists, mobility grouping on.  Total pages: 32512
	Kernel command line: earlyprintk ignore_loglevel  mem=128M console=ttyS0,115200 root=/dev/mmcblk0p2 rootfstype=ext4 rw rootwait
	Dentry cache hash table entries: 16384 (order: 4, 65536 bytes, linear)
	Inode-cache hash table entries: 8192 (order: 3, 32768 bytes, linear)
	mem auto-init: stack:off, heap alloc:off, heap free:off
	Memory: 121352K/131072K available (5826K kernel code, 199K rwdata, 1892K rodata, 232K init, 125K bss, 9720K reserved, 0K cma-reserved)
	NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
	random: get_random_bytes called from start_kernel+0x294/0x474 with crng_init=0
	bad: scheduling from the idle thread!
	CPU: 0 PID: 0 Comm: swapper Not tainted 5.3.0-rc1+ #4
	Hardware name: Atmel AT91SAM9
	[<c000fc4c>] (unwind_backtrace) from [<c000d654>] (show_stack+0x10/0x18)
	[<c000d654>] (show_stack) from [<c059db74>] (dump_stack+0x18/0x24)
	[<c059db74>] (dump_stack) from [<c00386e8>] (dequeue_task_idle+0x1c/0x34)
	[<c00386e8>] (dequeue_task_idle) from [<c05b5818>] (__schedule+0x250/0x38c)
	[<c05b5818>] (__schedule) from [<c05b59e8>] (schedule+0x94/0xc8)
	[<c05b59e8>] (schedule) from [<c05b876c>] (schedule_hrtimeout_range_clock+0xf4/0x13c)
	[<c05b876c>] (schedule_hrtimeout_range_clock) from [<c05b87cc>] (schedule_hrtimeout_range+0x18/0x24)
	[<c05b87cc>] (schedule_hrtimeout_range) from [<c05b8240>] (usleep_range+0x70/0x98)
	[<c05b8240>] (usleep_range) from [<c02a18a0>] (clk_slow_rc_osc_prepare+0x28/0x34)
	[<c02a18a0>] (clk_slow_rc_osc_prepare) from [<c029af78>] (clk_core_prepare+0x84/0xa0)
	[<c029af78>] (clk_core_prepare) from [<c029af54>] (clk_core_prepare+0x60/0xa0)
	[<c029af54>] (clk_core_prepare) from [<c029b790>] (clk_prepare+0x1c/0x30)
	[<c029b790>] (clk_prepare) from [<c02f1310>] (regmap_mmio_attach_clk+0x1c/0x24)
	[<c02f1310>] (regmap_mmio_attach_clk) from [<c02f7a98>] (of_syscon_register+0x218/0x268)
	[<c02f7a98>] (of_syscon_register) from [<c02f7b18>] (syscon_node_to_regmap+0x30/0x58)
	[<c02f7b18>] (syscon_node_to_regmap) from [<c07d2f7c>] (at91sam9x5_pmc_setup+0x78/0x430)
	[<c07d2f7c>] (at91sam9x5_pmc_setup) from [<c07cfe88>] (of_clk_init+0x188/0x21c)
	[<c07cfe88>] (of_clk_init) from [<c07c062c>] (time_init+0x1c/0x2c)
	[<c07c062c>] (time_init) from [<c07bcbec>] (start_kernel+0x2c4/0x474)
	[<c07bcbec>] (start_kernel) from [<00000000>] (0x0)
	bad: scheduling from the idle thread!
	CPU: 0 PID: 0 Comm: swapper Not tainted 5.3.0-rc1+ #4
	Hardware name: Atmel AT91SAM9
	[<c000fc4c>] (unwind_backtrace) from [<c000d654>] (show_stack+0x10/0x18)
	[<c000d654>] (show_stack) from [<c059db74>] (dump_stack+0x18/0x24)
	[<c059db74>] (dump_stack) from [<c00386e8>] (dequeue_task_idle+0x1c/0x34)
	[<c00386e8>] (dequeue_task_idle) from [<c05b5818>] (__schedule+0x250/0x38c)
	[<c05b5818>] (__schedule) from [<c05b59e8>] (schedule+0x94/0xc8)
	[<c05b59e8>] (schedule) from [<c05b876c>] (schedule_hrtimeout_range_clock+0xf4/0x13c)
	[<c05b876c>] (schedule_hrtimeout_range_clock) from [<c05b87cc>] (schedule_hrtimeout_range+0x18/0x24)
	[<c05b87cc>] (schedule_hrtimeout_range) from [<c05b8240>] (usleep_range+0x70/0x98)
	[<c05b8240>] (usleep_range) from [<c02a18a0>] (clk_slow_rc_osc_prepare+0x28/0x34)
	[<c02a18a0>] (clk_slow_rc_osc_prepare) from [<c029af78>] (clk_core_prepare+0x84/0xa0)
	[<c029af78>] (clk_core_prepare) from [<c029af54>] (clk_core_prepare+0x60/0xa0)
	[<c029af54>] (clk_core_prepare) from [<c029b790>] (clk_prepare+0x1c/0x30)
	[<c029b790>] (clk_prepare) from [<c02f1310>] (regmap_mmio_attach_clk+0x1c/0x24)
	[<c02f1310>] (regmap_mmio_attach_clk) from [<c02f7a98>] (of_syscon_register+0x218/0x268)
	[<c02f7a98>] (of_syscon_register) from [<c02f7b18>] (syscon_node_to_regmap+0x30/0x58)
	[<c02f7b18>] (syscon_node_to_regmap) from [<c07d2f7c>] (at91sam9x5_pmc_setup+0x78/0x430)
	[<c07d2f7c>] (at91sam9x5_pmc_setup) from [<c07cfe88>] (of_clk_init+0x188/0x21c)
	[<c07cfe88>] (of_clk_init) from [<c07c062c>] (time_init+0x1c/0x2c)
	[<c07c062c>] (time_init) from [<c07bcbec>] (start_kernel+0x2c4/0x474)
	[<c07bcbec>] (start_kernel) from [<00000000>] (0x0)
	bad: scheduling from the idle thread!
	CPU: 0 PID: 0 Comm: swapper Not tainted 5.3.0-rc1+ #4
	Hardware name: Atmel AT91SAM9
	...

The error message repeats without end. (I obviously didn't test until
the end :-), but after 10 minutes the machine still prints this message.)

With the old dtb Linux 5.3-rc1 boots just fine. I assume this is not
related to my dts or .config so I'm not attaching these here. If you're
interested I can provide them of course.

Best regards
Uwe

[1] https://www.acmesystems.it/arietta

-- 
Pengutronix e.K.                           | Uwe Kleine-König            |
Industrial Linux Solutions                 | http://www.pengutronix.de/  |