lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <d8be8bbf23e245b795f0cfd80baf3c15@AUSX13MPS302.AMER.DELL.COM>
Date:   Tue, 13 Nov 2018 18:00:37 +0000
From:   <Justin.Lee1@...l.com>
To:     <sam@...dozajonas.com>, <netdev@...r.kernel.org>
CC:     <davem@...emloft.net>, <linux-kernel@...r.kernel.org>,
        <openbmc@...ts.ozlabs.org>
Subject: RE: [PATCH net-next v3 6/6] net/ncsi: Configure multi-package,
 multi-channel modes with failover

Hi Samuel,

I have tested your new patch. The failover function works as expected.

Thanks,
Justin


> On Fri, 2018-11-09 at 21:58 +0000, Justin.Lee1@...l.com wrote:
> > Hi Samuel,
> > 
> > After running more testing, I notice that the extra patch causing failover function
> > to fail. Also, occasionally, I will see two channels having TX enabled if I
> > send netlink command back-to-back.
> > 
> > cat /sys/kernel/debug/ncsi_protocol/ncsi_device_
> > IFIDX IFNAME NAME   PID CID RX TX MP MC WP WC PC CS PS LS RU CR NQ HA
> > =====================================================================
> >   2   eth2   ncsi0  000 000 1  1  1  1  1  1  1  2  1  1  1  1  0  1
> >   2   eth2   ncsi1  000 001 1  1  1  1  1  1  0  2  1  1  1  1  0  1
> >   2   eth2   ncsi2  001 000 0  0  1  1  0  0  0  1  0  1  1  1  0  1
> >   2   eth2   ncsi3  001 001 0  0  1  1  0  0  0  1  0  1  1  1  0  1
> > =====================================================================
> > MP: Multi-mode Package  WP: Whitelist Package
> > MC: Multi-mode Channel  WC: Whitelist Channel
> > PC: Primary Channel     CS: Channel State IA/A/IV 1/2/3
> > PS: Poll Status         LS: Link Status
> > RU: Running             CR: Carrier OK
> > NQ: Queue Stopped       HA: Hardware Arbitration
> > 
> > Thanks,
> > Justin
> > 
> > 
> > > From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
> > > From: Samuel Mendoza-Jonas <sam@...dozajonas.com>
> > > Date: Fri, 9 Nov 2018 13:11:03 +1100
> > > Subject: [PATCH] net/ncsi: Reset state fixes, single-channel LSC
> > > 
> > > ---
> > >  net/ncsi/ncsi-aen.c    |  8 +++++---
> > >  net/ncsi/ncsi-manage.c | 19 +++++++++++++++----
> > >  2 files changed, 20 insertions(+), 7 deletions(-)
> > > 
> > > diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
> > > index 39c2e9eea2ba..034cb1dc5566 100644
> > > --- a/net/ncsi/ncsi-aen.c
> > > +++ b/net/ncsi/ncsi-aen.c
> > > @@ -93,14 +93,16 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
> > >  	if ((had_link == has_link) || chained)
> > >  		return 0;
> > >  
> > > -	if (!ndp->multi_package && !nc->package->multi_channel) {
> > > -		if (had_link)
> > > -			ndp->flags |= NCSI_DEV_RESHUFFLE;
> > > +	if (!ndp->multi_package && !nc->package->multi_channel && had_link) {
> > > +		ndp->flags |= NCSI_DEV_RESHUFFLE;
> > >  		ncsi_stop_channel_monitor(nc);
> > >  		spin_lock_irqsave(&ndp->lock, flags);
> > >  		list_add_tail_rcu(&nc->link, &ndp->channel_queue);
> > >  		spin_unlock_irqrestore(&ndp->lock, flags);
> > >  		return ncsi_process_next_channel(ndp);
> > > +	} else {
> > > +		/* Configured channel came up */
> > > +		return 0;
> > 
> > It is always going to else statement if multi_package and/or mutlit_channel is enabled.
> >  
> > npcm7xx-emc f0825000.eth eth2: NCSI: ncsi_aen_handler_lsc() - pkg 0 ch 0 state down
> > npcm7xx-emc f0825000.eth eth2: NCSI: ncsi_aen_handler_lsc() - had_link 1, has_link 0, chained 0
> > 
> > These codes have no chance to run.
> > 	if (had_link) {
> > 		ncm = &nc->modes[NCSI_MODE_TX_ENABLE];
> > 		if (ncsi_channel_is_last(ndp, nc)) {
> > 			/* No channels left, reconfigure */
> > 			return ncsi_reset_dev(&ndp->ndev);
> > 		} else if (ncm->enable) {
> > 			/* Need to failover Tx channel */
> > 			ncsi_update_tx_channel(ndp, nc->package, nc, NULL);
> > 		}
> > 
> > >  	}
> > > 
> 
> Oops, wrote that patch a little fast it seems. This may also affect the
> double-Tx above since ncsi_update_tx_channel() won't be reached.
> I've attached a fixed up version below.
> 
> For the failover issue you're seeing in your previous email the issue is
> likely in the ncsi_dev_state_suspend_gls state. This should send a GLS
> command to all available channels, but it only does it for the current
> package. Since not all packages are necessarily enabled in single-channel 
> mode I'll need to have a think about the neatest way to handle that, but
> it's a separate issue from this patch.
> 
> Cheers,
> Sam
> 
> 
> From 0000000000000000000000000000000000000000 Mon Sep 17 00:00:00 2001
> From: Samuel Mendoza-Jonas <sam@...dozajonas.com>
> Date: Fri, 9 Nov 2018 13:11:03 +1100
> Subject: [PATCH] net/ncsi: Reset state fixes, single-channel LSC
> 
> ---
>  net/ncsi/ncsi-aen.c    | 16 ++++++++++------
>  net/ncsi/ncsi-manage.c | 19 +++++++++++++++----
>  2 files changed, 25 insertions(+), 10 deletions(-)
> 
> diff --git a/net/ncsi/ncsi-aen.c b/net/ncsi/ncsi-aen.c
> index 39c2e9eea2ba..76559d0eeea8 100644
> --- a/net/ncsi/ncsi-aen.c
> +++ b/net/ncsi/ncsi-aen.c
> @@ -94,13 +94,17 @@ static int ncsi_aen_handler_lsc(struct ncsi_dev_priv *ndp,
>  		return 0;
>  
>  	if (!ndp->multi_package && !nc->package->multi_channel) {
> -		if (had_link)
> +		if (had_link) {
>  			ndp->flags |= NCSI_DEV_RESHUFFLE;
> -		ncsi_stop_channel_monitor(nc);
> -		spin_lock_irqsave(&ndp->lock, flags);
> -		list_add_tail_rcu(&nc->link, &ndp->channel_queue);
> -		spin_unlock_irqrestore(&ndp->lock, flags);
> -		return ncsi_process_next_channel(ndp);
> +			ncsi_stop_channel_monitor(nc);
> +			spin_lock_irqsave(&ndp->lock, flags);
> +			list_add_tail_rcu(&nc->link, &ndp->channel_queue);
> +			spin_unlock_irqrestore(&ndp->lock, flags);
> +			return ncsi_process_next_channel(ndp);
> +		} else {
> +			/* Configured channel came up */
> +			return 0;
> +		}
>  	}
>  
>  	if (had_link) {
> diff --git a/net/ncsi/ncsi-manage.c b/net/ncsi/ncsi-manage.c
> index fa3c2144f5ba..92e59f07f9a7 100644
> --- a/net/ncsi/ncsi-manage.c
> +++ b/net/ncsi/ncsi-manage.c
> @@ -1063,17 +1063,17 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
>  	case ncsi_dev_state_config_done:
>  		netdev_dbg(ndp->ndev.dev, "NCSI: channel %u config done\n",
>  			   nc->id);
> +		spin_lock_irqsave(&nc->lock, flags);
> +		nc->state = NCSI_CHANNEL_ACTIVE;
> +
>  		if (ndp->flags & NCSI_DEV_RESET) {
>  			/* A reset event happened during config, start it now */
> -			spin_lock_irqsave(&nc->lock, flags);
>  			nc->reconfigure_needed = false;
>  			spin_unlock_irqrestore(&nc->lock, flags);
> -			nd->state = ncsi_dev_state_functional;
>  			ncsi_reset_dev(nd);
>  			break;
>  		}
>  
> -		spin_lock_irqsave(&nc->lock, flags);
>  		if (nc->reconfigure_needed) {
>  			/* This channel's configuration has been updated
>  			 * part-way during the config state - start the
> @@ -1092,7 +1092,6 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
>  			break;
>  		}
>  
> -		nc->state = NCSI_CHANNEL_ACTIVE;
>  		if (nc->modes[NCSI_MODE_LINK].data[2] & 0x1) {
>  			hot_nc = nc;
>  		} else {
> @@ -1803,6 +1802,18 @@ int ncsi_reset_dev(struct ncsi_dev *nd)
>  			spin_unlock_irqrestore(&ndp->lock, flags);
>  			return 0;
>  		}
> +	} else {
> +		switch (nd->state) {
> +		case ncsi_dev_state_suspend_done:
> +		case ncsi_dev_state_config_done:
> +		case ncsi_dev_state_functional:
> +			/* Ok */
> +			break;
> +		default:
> +			/* Current reset operation happening */
> +			spin_unlock_irqrestore(&ndp->lock, flags);
> +			return 0;
> +		}
>  	}
>  
>  	if (!list_empty(&ndp->channel_queue)) {
> -- 
> 2.19.1

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ