lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181119164842.GA31822@kwain>
Date:   Mon, 19 Nov 2018 16:48:42 +0000
From:   Antoine Tenart <antoine.tenart@...e-electrons.com>
To:     Maxime Chevallier <maxime.chevallier@...tlin.com>
Cc:     Grygorii Strashko <grygorii.strashko@...com>,
        "David S. Miller" <davem@...emloft.net>,
        Kishon Vijay Abraham I <kishon@...com>,
        Russell King - ARM Linux <linux@...linux.org.uk>,
        netdev@...r.kernel.org, Sekhar Nori <nsekhar@...com>,
        linux-kernel@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
        Tony Lindgren <tony@...mide.com>,
        linux-amlogic@...ts.infradead.org,
        linux-mediatek@...ts.infradead.org,
        Alexandre Belloni <alexandre.belloni@...tlin.com>,
        Antoine Tenart <antoine.tenart@...e-electrons.com>,
        Quentin Schulz <quentin.schulz@...tlin.com>,
        Vivek Gautam <vivek.gautam@...eaurora.org>,
        Maxime Ripard <maxime.ripard@...tlin.com>,
        Chen-Yu Tsai <wens@...e.org>, Carlo Caione <carlo@...one.org>,
        Chunfeng Yun <chunfeng.yun@...iatek.com>,
        Matthias Brugger <matthias.bgg@...il.com>,
        Manu Gautam <mgautam@...eaurora.org>
Subject: Re: [PATCH v2 4/5] phy: mvebu-cp110-comphy: convert to use eth phy
 mode and submode

Hi,

On Mon, Nov 19, 2018 at 09:26:32AM +0100, Maxime Chevallier wrote:
> 
> On Fri, 9 Nov 2018 17:47:54 -0600
> Grygorii Strashko <grygorii.strashko@...com> wrote:
> 
> >Convert mvebu-cp110-comphy PHY driver to use recently introduced
> >PHY_MODE_ETHERNET and phy_set_mode_ext().
> 
> Sorry I missed your V2, hopefully I tested the right version this time.
> Tested on MCBin, this works just fine.
> 
> Tested-by: Maxime Chevallier <maxime.chevallier@...tlin.com>

Thank you for testing!

Acked-by: Antoine Tenart <antoine.tenart@...tlin.com>

Antoine

> >Signed-off-by: Grygorii Strashko <grygorii.strashko@...com>
> >---
> > drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c | 19 +-----
> > drivers/phy/marvell/phy-mvebu-cp110-comphy.c    | 83 ++++++++++++++-----------
> > 2 files changed, 48 insertions(+), 54 deletions(-)
> >
> >diff --git a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> >index 7a37a37..731793a 100644
> >--- a/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> >+++ b/drivers/net/ethernet/marvell/mvpp2/mvpp2_main.c
> >@@ -1165,28 +1165,13 @@ static void mvpp22_gop_setup_irq(struct mvpp2_port *port)
> >  */
> > static int mvpp22_comphy_init(struct mvpp2_port *port)
> > {
> >-	enum phy_mode mode;
> > 	int ret;
> > 
> > 	if (!port->comphy)
> > 		return 0;
> > 
> >-	switch (port->phy_interface) {
> >-	case PHY_INTERFACE_MODE_SGMII:
> >-	case PHY_INTERFACE_MODE_1000BASEX:
> >-		mode = PHY_MODE_SGMII;
> >-		break;
> >-	case PHY_INTERFACE_MODE_2500BASEX:
> >-		mode = PHY_MODE_2500SGMII;
> >-		break;
> >-	case PHY_INTERFACE_MODE_10GKR:
> >-		mode = PHY_MODE_10GKR;
> >-		break;
> >-	default:
> >-		return -EINVAL;
> >-	}
> >-
> >-	ret = phy_set_mode(port->comphy, mode);
> >+	ret = phy_set_mode_ext(port->comphy, PHY_MODE_ETHERNET,
> >+			       port->phy_interface);
> > 	if (ret)
> > 		return ret;
> > 
> >diff --git a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
> >index 79b52c3..7dee72b 100644
> >--- a/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
> >+++ b/drivers/phy/marvell/phy-mvebu-cp110-comphy.c
> >@@ -9,6 +9,7 @@
> > #include <linux/iopoll.h>
> > #include <linux/mfd/syscon.h>
> > #include <linux/module.h>
> >+#include <linux/phy.h>
> > #include <linux/phy/phy.h>
> > #include <linux/platform_device.h>
> > #include <linux/regmap.h>
> >@@ -131,26 +132,26 @@ struct mvebu_comhy_conf {
> > 
> > static const struct mvebu_comhy_conf mvebu_comphy_cp110_modes[] = {
> > 	/* lane 0 */
> >-	MVEBU_COMPHY_CONF(0, 1, PHY_MODE_SGMII, 0x1),
> >-	MVEBU_COMPHY_CONF(0, 1, PHY_MODE_2500SGMII, 0x1),
> >+	MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
> >+	MVEBU_COMPHY_CONF(0, 1, PHY_INTERFACE_MODE_2500BASEX, 0x1),
> > 	/* lane 1 */
> >-	MVEBU_COMPHY_CONF(1, 2, PHY_MODE_SGMII, 0x1),
> >-	MVEBU_COMPHY_CONF(1, 2, PHY_MODE_2500SGMII, 0x1),
> >+	MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
> >+	MVEBU_COMPHY_CONF(1, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
> > 	/* lane 2 */
> >-	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_SGMII, 0x1),
> >-	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_2500SGMII, 0x1),
> >-	MVEBU_COMPHY_CONF(2, 0, PHY_MODE_10GKR, 0x1),
> >+	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_SGMII, 0x1),
> >+	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_2500BASEX, 0x1),
> >+	MVEBU_COMPHY_CONF(2, 0, PHY_INTERFACE_MODE_10GKR, 0x1),
> > 	/* lane 3 */
> >-	MVEBU_COMPHY_CONF(3, 1, PHY_MODE_SGMII, 0x2),
> >-	MVEBU_COMPHY_CONF(3, 1, PHY_MODE_2500SGMII, 0x2),
> >+	MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_SGMII, 0x2),
> >+	MVEBU_COMPHY_CONF(3, 1, PHY_INTERFACE_MODE_2500BASEX, 0x2),
> > 	/* lane 4 */
> >-	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_SGMII, 0x2),
> >-	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_2500SGMII, 0x2),
> >-	MVEBU_COMPHY_CONF(4, 0, PHY_MODE_10GKR, 0x2),
> >-	MVEBU_COMPHY_CONF(4, 1, PHY_MODE_SGMII, 0x1),
> >+	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_SGMII, 0x2),
> >+	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_2500BASEX, 0x2),
> >+	MVEBU_COMPHY_CONF(4, 0, PHY_INTERFACE_MODE_10GKR, 0x2),
> >+	MVEBU_COMPHY_CONF(4, 1, PHY_INTERFACE_MODE_SGMII, 0x1),
> > 	/* lane 5 */
> >-	MVEBU_COMPHY_CONF(5, 2, PHY_MODE_SGMII, 0x1),
> >-	MVEBU_COMPHY_CONF(5, 2, PHY_MODE_2500SGMII, 0x1),
> >+	MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_SGMII, 0x1),
> >+	MVEBU_COMPHY_CONF(5, 2, PHY_INTERFACE_MODE_2500BASEX, 0x1),
> > };
> > 
> > struct mvebu_comphy_priv {
> >@@ -163,10 +164,12 @@ struct mvebu_comphy_lane {
> > 	struct mvebu_comphy_priv *priv;
> > 	unsigned id;
> > 	enum phy_mode mode;
> >+	int submode;
> > 	int port;
> > };
> > 
> >-static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode)
> >+static int mvebu_comphy_get_mux(int lane, int port,
> >+				enum phy_mode mode, int submode)
> > {
> > 	int i, n = ARRAY_SIZE(mvebu_comphy_cp110_modes);
> > 
> >@@ -177,7 +180,7 @@ static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode)
> > 	for (i = 0; i < n; i++) {
> > 		if (mvebu_comphy_cp110_modes[i].lane == lane &&
> > 		    mvebu_comphy_cp110_modes[i].port == port &&
> >-		    mvebu_comphy_cp110_modes[i].mode == mode)
> >+		    mvebu_comphy_cp110_modes[i].mode == submode)
> > 			break;
> > 	}
> > 
> >@@ -187,8 +190,7 @@ static int mvebu_comphy_get_mux(int lane, int port, enum phy_mode mode)
> > 	return mvebu_comphy_cp110_modes[i].mux;
> > }
> > 
> >-static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
> >-					     enum phy_mode mode)
> >+static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane)
> > {
> > 	struct mvebu_comphy_priv *priv = lane->priv;
> > 	u32 val;
> >@@ -206,14 +208,14 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
> > 		 MVEBU_COMPHY_SERDES_CFG0_HALF_BUS |
> > 		 MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xf) |
> > 		 MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xf));
> >-	if (mode == PHY_MODE_10GKR)
> >+	if (lane->submode == PHY_INTERFACE_MODE_10GKR)
> > 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0xe) |
> > 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0xe);
> >-	else if (mode == PHY_MODE_2500SGMII)
> >+	else if (lane->submode == PHY_INTERFACE_MODE_2500BASEX)
> > 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x8) |
> > 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x8) |
> > 		       MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
> >-	else if (mode == PHY_MODE_SGMII)
> >+	else if (lane->submode == PHY_INTERFACE_MODE_SGMII)
> > 		val |= MVEBU_COMPHY_SERDES_CFG0_GEN_RX(0x6) |
> > 		       MVEBU_COMPHY_SERDES_CFG0_GEN_TX(0x6) |
> > 		       MVEBU_COMPHY_SERDES_CFG0_HALF_BUS;
> >@@ -243,7 +245,7 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
> > 	/* refclk selection */
> > 	val = readl(priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id));
> > 	val &= ~MVEBU_COMPHY_MISC_CTRL0_REFCLK_SEL;
> >-	if (mode == PHY_MODE_10GKR)
> >+	if (lane->submode == PHY_INTERFACE_MODE_10GKR)
> > 		val |= MVEBU_COMPHY_MISC_CTRL0_ICP_FORCE;
> > 	writel(val, priv->base + MVEBU_COMPHY_MISC_CTRL0(lane->id));
> > 
> >@@ -261,8 +263,7 @@ static void mvebu_comphy_ethernet_init_reset(struct mvebu_comphy_lane *lane,
> > 	writel(val, priv->base + MVEBU_COMPHY_LOOPBACK(lane->id));
> > }
> > 
> >-static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane,
> >-				  enum phy_mode mode)
> >+static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane)
> > {
> > 	struct mvebu_comphy_priv *priv = lane->priv;
> > 	u32 val;
> >@@ -303,13 +304,13 @@ static int mvebu_comphy_init_plls(struct mvebu_comphy_lane *lane,
> > 	return 0;
> > }
> > 
> >-static int mvebu_comphy_set_mode_sgmii(struct phy *phy, enum phy_mode mode)
> >+static int mvebu_comphy_set_mode_sgmii(struct phy *phy)
> > {
> > 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
> > 	struct mvebu_comphy_priv *priv = lane->priv;
> > 	u32 val;
> > 
> >-	mvebu_comphy_ethernet_init_reset(lane, mode);
> >+	mvebu_comphy_ethernet_init_reset(lane);
> > 
> > 	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
> > 	val &= ~MVEBU_COMPHY_RX_CTRL1_CLK8T_EN;
> >@@ -330,7 +331,7 @@ static int mvebu_comphy_set_mode_sgmii(struct phy *phy, enum phy_mode mode)
> > 	val |= MVEBU_COMPHY_GEN1_S0_TX_EMPH(0x1);
> > 	writel(val, priv->base + MVEBU_COMPHY_GEN1_S0(lane->id));
> > 
> >-	return mvebu_comphy_init_plls(lane, PHY_MODE_SGMII);
> >+	return mvebu_comphy_init_plls(lane);
> > }
> > 
> > static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
> >@@ -339,7 +340,7 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
> > 	struct mvebu_comphy_priv *priv = lane->priv;
> > 	u32 val;
> > 
> >-	mvebu_comphy_ethernet_init_reset(lane, PHY_MODE_10GKR);
> >+	mvebu_comphy_ethernet_init_reset(lane);
> > 
> > 	val = readl(priv->base + MVEBU_COMPHY_RX_CTRL1(lane->id));
> > 	val |= MVEBU_COMPHY_RX_CTRL1_RXCLK2X_SEL |
> >@@ -469,7 +470,7 @@ static int mvebu_comphy_set_mode_10gkr(struct phy *phy)
> > 	val |= MVEBU_COMPHY_EXT_SELV_RX_SAMPL(0x1a);
> > 	writel(val, priv->base + MVEBU_COMPHY_EXT_SELV(lane->id));
> > 
> >-	return mvebu_comphy_init_plls(lane, PHY_MODE_10GKR);
> >+	return mvebu_comphy_init_plls(lane);
> > }
> > 
> > static int mvebu_comphy_power_on(struct phy *phy)
> >@@ -479,7 +480,8 @@ static int mvebu_comphy_power_on(struct phy *phy)
> > 	int ret, mux;
> > 	u32 val;
> > 
> >-	mux = mvebu_comphy_get_mux(lane->id, lane->port, lane->mode);
> >+	mux = mvebu_comphy_get_mux(lane->id, lane->port,
> >+				   lane->mode, lane->submode);
> > 	if (mux < 0)
> > 		return -ENOTSUPP;
> > 
> >@@ -492,12 +494,12 @@ static int mvebu_comphy_power_on(struct phy *phy)
> > 	val |= mux << MVEBU_COMPHY_SELECTOR_PHY(lane->id);
> > 	regmap_write(priv->regmap, MVEBU_COMPHY_SELECTOR, val);
> > 
> >-	switch (lane->mode) {
> >-	case PHY_MODE_SGMII:
> >-	case PHY_MODE_2500SGMII:
> >-		ret = mvebu_comphy_set_mode_sgmii(phy, lane->mode);
> >+	switch (lane->submode) {
> >+	case PHY_INTERFACE_MODE_SGMII:
> >+	case PHY_INTERFACE_MODE_2500BASEX:
> >+		ret = mvebu_comphy_set_mode_sgmii(phy);
> > 		break;
> >-	case PHY_MODE_10GKR:
> >+	case PHY_INTERFACE_MODE_10GKR:
> > 		ret = mvebu_comphy_set_mode_10gkr(phy);
> > 		break;
> > 	default:
> >@@ -517,10 +519,17 @@ static int mvebu_comphy_set_mode(struct phy *phy,
> > {
> > 	struct mvebu_comphy_lane *lane = phy_get_drvdata(phy);
> > 
> >-	if (mvebu_comphy_get_mux(lane->id, lane->port, mode) < 0)
> >+	if (mode != PHY_MODE_ETHERNET)
> >+		return -EINVAL;
> >+
> >+	if (submode == PHY_INTERFACE_MODE_1000BASEX)
> >+		submode = PHY_INTERFACE_MODE_SGMII;
> >+
> >+	if (mvebu_comphy_get_mux(lane->id, lane->port, mode, submode) < 0)
> > 		return -EINVAL;
> > 
> > 	lane->mode = mode;
> >+	lane->submode = submode;
> > 	return 0;
> > }
> > 
> 
> 
> 
> -- 
> Maxime Chevallier, Bootlin
> Embedded Linux and kernel engineering
> https://bootlin.com

-- 
Antoine Ténart, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ