[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <04c28877-7705-ce7e-cb73-67d202174741@ti.com>
Date: Tue, 20 Nov 2018 10:30:23 +0530
From: Kishon Vijay Abraham I <kishon@...com>
To: Faiz Abbas <faiz_abbas@...com>, <linux-kernel@...r.kernel.org>,
<linux-mmc@...r.kernel.org>
CC: <ulf.hansson@...aro.org>, <adrian.hunter@...el.com>
Subject: Re: [PATCH 3/4] mmc: sdhci-omap: Add platform specific reset callback
On 19/11/18 4:46 PM, Faiz Abbas wrote:
> The TRM (SPRUIC2C - January 2017 - Revised May 2018 [1]) forbids
> assertion of data reset while tuning is happening. Implement a
> platform specific callback that takes care of this condition.
>
> [1] http://www.ti.com/lit/pdf/spruic2 Section 25.5.1.2.4
>
> Signed-off-by: Faiz Abbas <faiz_abbas@...com>
Once patch 2 is merged with this patch, you can add
Acked-by: Kishon Vijay Abraham I <kishon@...com>
> ---
> drivers/mmc/host/sdhci-omap.c | 14 +++++++++++++-
> 1 file changed, 13 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index cfffcf58be3f..bf268b38ddc8 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -688,6 +688,18 @@ static void sdhci_omap_set_uhs_signaling(struct sdhci_host *host,
> sdhci_omap_start_clock(omap_host);
> }
>
> +void sdhci_omap_reset(struct sdhci_host *host, u8 mask)
> +{
> + struct sdhci_pltfm_host *pltfm_host = sdhci_priv(host);
> + struct sdhci_omap_host *omap_host = sdhci_pltfm_priv(pltfm_host);
> +
> + /* Don't reset data lines during tuning operation */
> + if (omap_host->is_tuning)
> + mask &= ~SDHCI_RESET_DATA;
> +
> + sdhci_reset(host, mask);
> +}
> +
> static struct sdhci_ops sdhci_omap_ops = {
> .set_clock = sdhci_omap_set_clock,
> .set_power = sdhci_omap_set_power,
> @@ -696,7 +708,7 @@ static struct sdhci_ops sdhci_omap_ops = {
> .get_min_clock = sdhci_omap_get_min_clock,
> .set_bus_width = sdhci_omap_set_bus_width,
> .platform_send_init_74_clocks = sdhci_omap_init_74_clocks,
> - .reset = sdhci_reset,
> + .reset = sdhci_omap_reset,
> .set_uhs_signaling = sdhci_omap_set_uhs_signaling,
> };
>
>
Powered by blists - more mailing lists