lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <1542967157-8053-1-git-send-email-harini.katakam@xilinx.com>
Date:   Fri, 23 Nov 2018 15:29:17 +0530
From:   Harini Katakam <harini.katakam@...inx.com>
To:     <nicolas.ferre@...rochip.com>, <davem@...emloft.net>
CC:     <netdev@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <michal.simek@...inx.com>, <harinikatakamlinux@...il.com>,
        <harini.katakam@...inx.com>
Subject: [RFC PATCH] net: macb: Apply RXUBR workaround only to versions with errata

The interrupt handler contains a workaround for RX hang applicable
to Zynq and AT91 only. Subsequent versions do not need this
workaround. This workaround unecessarily reset RX whenever RX used
bit read is observed, which can be often under heavy traffic.Hence
introduce an errata field and a check to enable this workaround.

Signed-off-by: Harini Katakam <harini.katakam@...inx.com>
---
Note: Enabled the errata in zynq and at91 configs only.
Please advise if any other versions are affected by this errata.

 drivers/net/ethernet/cadence/macb.h      | 6 ++++++
 drivers/net/ethernet/cadence/macb_main.c | 9 +++++++--
 2 files changed, 13 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb.h b/drivers/net/ethernet/cadence/macb.h
index 3d45f4c..f6903d6 100644
--- a/drivers/net/ethernet/cadence/macb.h
+++ b/drivers/net/ethernet/cadence/macb.h
@@ -648,6 +648,9 @@
 #define MACB_CAPS_SG_DISABLED			0x40000000
 #define MACB_CAPS_MACB_IS_GEM			0x80000000
 
+/* Errata mask bits */
+#define MACB_ERRATA_RXLOCKUP			0x00000001
+
 /* LSO settings */
 #define MACB_LSO_UFO_ENABLE			0x01
 #define MACB_LSO_TSO_ENABLE			0x02
@@ -1085,6 +1088,7 @@ struct macb_config {
 			    struct clk **rx_clk);
 	int	(*init)(struct platform_device *pdev);
 	int	jumbo_max_len;
+	u32	errata;
 };
 
 struct tsu_incr {
@@ -1214,6 +1218,8 @@ struct macb {
 
 	int	rx_bd_rd_prefetch;
 	int	tx_bd_rd_prefetch;
+
+	u32 errata;
 };
 
 #ifdef CONFIG_MACB_USE_HWSTAMP
diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index 1d86b4d..f0bb8a4 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -1379,7 +1379,8 @@ static irqreturn_t macb_interrupt(int irq, void *dev_id)
 		 * the at91 manual, section 41.3.1 or the Zynq manual
 		 * section 16.7.4 for details.
 		 */
-		if (status & MACB_BIT(RXUBR)) {
+		if ((bp->errata & MACB_ERRATA_RXLOCKUP) &&
+		    (status & MACB_BIT(RXUBR))) {
 			ctrl = macb_readl(bp, NCR);
 			macb_writel(bp, NCR, ctrl & ~MACB_BIT(RE));
 			wmb();
@@ -3835,6 +3836,7 @@ static const struct macb_config at91sam9260_config = {
 	.caps = MACB_CAPS_USRIO_HAS_CLKEN | MACB_CAPS_USRIO_DEFAULT_IS_MII_GMII,
 	.clk_init = macb_clk_init,
 	.init = macb_init,
+	.errata = MACB_ERRATA_RXLOCKUP,
 };
 
 static const struct macb_config sama5d3macb_config = {
@@ -3900,6 +3902,7 @@ static const struct macb_config zynq_config = {
 	.dma_burst_length = 16,
 	.clk_init = macb_clk_init,
 	.init = macb_init,
+	.errata = MACB_ERRATA_RXLOCKUP,
 };
 
 static const struct of_device_id macb_dt_ids[] = {
@@ -4005,8 +4008,10 @@ static int macb_probe(struct platform_device *pdev)
 	bp->hclk = hclk;
 	bp->tx_clk = tx_clk;
 	bp->rx_clk = rx_clk;
-	if (macb_config)
+	if (macb_config) {
 		bp->jumbo_max_len = macb_config->jumbo_max_len;
+		bp->errata = macb_config->errata;
+	}
 
 	bp->wol = 0;
 	if (of_get_property(np, "magic-packet", NULL))
-- 
2.7.4

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ