[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <BYAPR07MB47096DA8D0A23B585F731111DDD60@BYAPR07MB4709.namprd07.prod.outlook.com>
Date: Sun, 25 Nov 2018 07:33:33 +0000
From: Pawel Laszczak <pawell@...ence.com>
To: Roger Quadros <rogerq@...com>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>
CC: "gregkh@...uxfoundation.org" <gregkh@...uxfoundation.org>,
"linux-usb@...r.kernel.org" <linux-usb@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Alan Douglas <adouglas@...ence.com>,
"jbergsagel@...com" <jbergsagel@...com>,
"nsekhar@...com" <nsekhar@...com>, "nm@...com" <nm@...com>,
Suresh Punnoose <sureshp@...ence.com>,
"peter.chen@....com" <peter.chen@....com>,
Pawel Jez <pjez@...ence.com>, Rahul Kumar <kurahul@...ence.com>
Subject: RE: [RFC PATCH v2 03/15] dt-bindings: add binding for USBSS-DRD
controller.
Hi Roger
>On 18/11/18 12:08, Pawel Laszczak wrote:
>> Thsi patch aim at documenting USB related dt-bindings for the
>
>s/Thsi/This
>
>> Cadence USBSS-DRD controller.
>>
>> Signed-off-by: Pawel Laszczak <pawell@...ence.com>
>> ---
>> .../devicetree/bindings/usb/cdns3-usb.txt | 17 +++++++++++++++++
>> 1 file changed, 17 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/usb/cdns3-usb.txt
>>
>> diff --git a/Documentation/devicetree/bindings/usb/cdns3-usb.txt b/Documentation/devicetree/bindings/usb/cdns3-usb.txt
>> new file mode 100644
>> index 000000000000..f9e953f32d47
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/usb/cdns3-usb.txt
>> @@ -0,0 +1,17 @@
>> +Binding for the Cadence USBSS-DRD controller
>> +
>> +Required properties:
>> + - reg: Physical base address and size of the controller's register area.
>> + - compatible: Should contain: "cdns,usb3"
>> + - interrupts: Interrupt specifier. Refer to interrupt bindings.
>
>Do you also comply with USB generic bindings for dr_mode, speed, etc?
>i.e. Documentation/devicetree/bindings/usb/generic.txt
>
>If yes it must be mentioned in Optional properties:
I took a look at this document and I think that only dr_mode and maximum-speed make sense
as optional parameters.
I will add these two as optional.
Thanks.
>
>> +
>> +
>> +Example:
>> + cdns3@...00000 {
>> + compatible = "cdns,usb3";
>> + interrupts = <USB_IRQ 7 IRQ_TYPE_LEVEL_HIGH>;
>> + reg = <0xf3000000 0x10000 //memory area for OTG/DRD registers
>> + 0xf3010000 0x10000 //memory area for HOST registers
>> + 0xf3020000 0x10000>; //memory area for Device registers
>> + };
>> +
>>
>
>cheers,
>-roger
>--
>Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
>Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
Cheers,
Pawel
Powered by blists - more mailing lists