| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <5BFC2B69.1050204@st.com>
Date: Mon, 26 Nov 2018 17:20:41 +0000
From: Pascal PAILLET-LME <p.paillet@...com>
To: Lee Jones <lee.jones@...aro.org>
CC: "dmitry.torokhov@...il.com" <dmitry.torokhov@...il.com>,
"robh+dt@...nel.org" <robh+dt@...nel.org>,
"mark.rutland@....com" <mark.rutland@....com>,
"lgirdwood@...il.com" <lgirdwood@...il.com>,
"broonie@...nel.org" <broonie@...nel.org>,
"wim@...ux-watchdog.org" <wim@...ux-watchdog.org>,
"linux@...ck-us.net" <linux@...ck-us.net>,
"linux-input@...r.kernel.org" <linux-input@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"linux-watchdog@...r.kernel.org" <linux-watchdog@...r.kernel.org>,
"benjamin.gaignard@...aro.org" <benjamin.gaignard@...aro.org>,
"eballetbo@...il.com" <eballetbo@...il.com>,
"axel.lin@...ics.com" <axel.lin@...ics.com>
Subject: Re: [PATCH v5 2/8] mfd: stpmic1: add stpmic1 driver
Hi Lee,
I have just one question regarding i2c_device_id.
Le 11/13/2018 08:40 AM, Lee Jones a écrit :
> On Mon, 29 Oct 2018, Pascal PAILLET-LME wrote:
>
>> stpmic1 is a pmic from STMicroelectronics. The STPMIC1 integrates 10
> "STPMIC1 is a PMIC"
>
>> regulators, 3 power switches, a watchdog and an input for a power on key.
>>
>> Signed-off-by: Pascal Paillet <p.paillet@...com>
>> ---
>> changes in v5:
>> * use macro to define regmap register ranges
>> * use REGMAP_IRQ_REG marco to define interrupts
>> * remove st properties
>>
>> drivers/mfd/Kconfig | 13 +++
>> drivers/mfd/Makefile | 1 +
>> drivers/mfd/stpmic1.c | 215 ++++++++++++++++++++++++++++++++++++++++++++
>> include/linux/mfd/stpmic1.h | 212 +++++++++++++++++++++++++++++++++++++++++++
>> 4 files changed, 444 insertions(+)
>> create mode 100644 drivers/mfd/stpmic1.c
>> create mode 100644 include/linux/mfd/stpmic1.h
>>
>> diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
>> index 11841f4..07e39a6 100644
>> --- a/drivers/mfd/Kconfig
>> +++ b/drivers/mfd/Kconfig
>> @@ -1855,6 +1855,22 @@ config MFD_STM32_TIMERS
>> for PWM and IIO Timer. This driver allow to share the
>> registers between the others drivers.
>>
>> +config MFD_STPMIC1
>> + tristate "Support for STPMIC1 PMIC"
>> + depends on (I2C=y && OF)
>> + select REGMAP_I2C
>> + select REGMAP_IRQ
>> + select MFD_CORE
>> + help
>> + Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on
>> + key, watchdog and regulator functionalities which are supported via
>> + the relevant subsystems. This driver provides core support for the
>> + STPMIC1, in order to use the actual functionaltiy of the device other
> s/,/./
>
>> + drivers must be enabled.
>> +
>> + To compile this driver as a module, choose M here: the
>> + module will be called stpmic1.
>> +
>> menu "Multimedia Capabilities Port drivers"
>> depends on ARCH_SA1100
>>
>> diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
>> index 5856a94..76fff14 100644
>> --- a/drivers/mfd/Makefile
>> +++ b/drivers/mfd/Makefile
>> @@ -232,6 +232,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI) += intel_soc_pmic_chtdc_ti.o
>> obj-$(CONFIG_MFD_MT6397) += mt6397-core.o
>>
>> obj-$(CONFIG_MFD_ALTERA_A10SR) += altera-a10sr.o
>> +obj-$(CONFIG_MFD_STPMIC1) += stpmic1.o
>> obj-$(CONFIG_MFD_SUN4I_GPADC) += sun4i-gpadc.o
>>
>> obj-$(CONFIG_MFD_STM32_LPTIMER) += stm32-lptimer.o
>> diff --git a/drivers/mfd/stpmic1.c b/drivers/mfd/stpmic1.c
>> new file mode 100644
>> index 0000000..2f4fd5e
>> --- /dev/null
>> +++ b/drivers/mfd/stpmic1.c
>> @@ -0,0 +1,215 @@
>> +// SPDX-License-Identifier: GPL-2.0
>> +// Copyright (C) STMicroelectronics 2018
>> +// Author: Pascal Paillet <p.paillet@...com>
>> +
>> +#include <linux/i2c.h>
>> +#include <linux/interrupt.h>
>> +#include <linux/mfd/core.h>
>> +#include <linux/mfd/stpmic1.h>
>> +#include <linux/module.h>
>> +#include <linux/of.h>
>> +#include <linux/of_irq.h>
>> +#include <linux/of_platform.h>
>> +#include <linux/pm_wakeirq.h>
>> +#include <linux/regmap.h>
>> +
>> +#include <dt-bindings/mfd/st,stpmic1.h>
>> +
>> +#define STPMIC1_MAIN_IRQ 0
>> +
>> +static const struct regmap_range stpmic1_readable_ranges[] = {
>> + regmap_reg_range(TURN_ON_SR, VERSION_SR),
>> + regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
>> + regmap_reg_range(BST_SW_CR, BST_SW_CR),
>> + regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
>> + regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
>> + regmap_reg_range(INT_MASK_R1, INT_MASK_R4),
>> + regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
>> + regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
>> + regmap_reg_range(INT_SRC_R1, INT_SRC_R1),
>> +};
>> +
>> +static const struct regmap_range stpmic1_writeable_ranges[] = {
>> + regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
>> + regmap_reg_range(BST_SW_CR, BST_SW_CR),
>> + regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
>> + regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
>> + regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
>> +};
>> +
>> +static const struct regmap_range stpmic1_volatile_ranges[] = {
>> + regmap_reg_range(TURN_ON_SR, VERSION_SR),
>> + regmap_reg_range(WCHDG_CR, WCHDG_CR),
>> + regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
>> + regmap_reg_range(INT_SRC_R1, INT_SRC_R4),
>> +};
> Nice!
>
>> +static const struct regmap_access_table stpmic1_readable_table = {
>> + .yes_ranges = stpmic1_readable_ranges,
>> + .n_yes_ranges = ARRAY_SIZE(stpmic1_readable_ranges),
>> +};
>> +
>> +static const struct regmap_access_table stpmic1_writeable_table = {
>> + .yes_ranges = stpmic1_writeable_ranges,
>> + .n_yes_ranges = ARRAY_SIZE(stpmic1_writeable_ranges),
>> +};
>> +
>> +static const struct regmap_access_table stpmic1_volatile_table = {
>> + .yes_ranges = stpmic1_volatile_ranges,
>> + .n_yes_ranges = ARRAY_SIZE(stpmic1_volatile_ranges),
>> +};
>> +
>> +const struct regmap_config stpmic1_regmap_config = {
>> + .reg_bits = 8,
>> + .val_bits = 8,
>> + .cache_type = REGCACHE_RBTREE,
>> + .max_register = PMIC_MAX_REGISTER_ADDRESS,
>> + .rd_table = &stpmic1_readable_table,
>> + .wr_table = &stpmic1_writeable_table,
>> + .volatile_table = &stpmic1_volatile_table,
>> +};
>> +
>> +static const struct regmap_irq stpmic1_irqs[] = {
>> + REGMAP_IRQ_REG(IT_PONKEY_F, 0, 0x01),
>> + REGMAP_IRQ_REG(IT_PONKEY_R, 0, 0x02),
>> + REGMAP_IRQ_REG(IT_WAKEUP_F, 0, 0x04),
>> + REGMAP_IRQ_REG(IT_WAKEUP_R, 0, 0x08),
>> + REGMAP_IRQ_REG(IT_VBUS_OTG_F, 0, 0x10),
>> + REGMAP_IRQ_REG(IT_VBUS_OTG_R, 0, 0x20),
>> + REGMAP_IRQ_REG(IT_SWOUT_F, 0, 0x40),
>> + REGMAP_IRQ_REG(IT_SWOUT_R, 0, 0x80),
>> +
>> + REGMAP_IRQ_REG(IT_CURLIM_BUCK1, 1, 0x01),
>> + REGMAP_IRQ_REG(IT_CURLIM_BUCK2, 1, 0x02),
>> + REGMAP_IRQ_REG(IT_CURLIM_BUCK3, 1, 0x04),
>> + REGMAP_IRQ_REG(IT_CURLIM_BUCK4, 1, 0x08),
>> + REGMAP_IRQ_REG(IT_OCP_OTG, 1, 0x10),
>> + REGMAP_IRQ_REG(IT_OCP_SWOUT, 1, 0x20),
>> + REGMAP_IRQ_REG(IT_OCP_BOOST, 1, 0x40),
>> + REGMAP_IRQ_REG(IT_OVP_BOOST, 1, 0x80),
>> +
>> + REGMAP_IRQ_REG(IT_CURLIM_LDO1, 2, 0x01),
>> + REGMAP_IRQ_REG(IT_CURLIM_LDO2, 2, 0x02),
>> + REGMAP_IRQ_REG(IT_CURLIM_LDO3, 2, 0x04),
>> + REGMAP_IRQ_REG(IT_CURLIM_LDO4, 2, 0x08),
>> + REGMAP_IRQ_REG(IT_CURLIM_LDO5, 2, 0x10),
>> + REGMAP_IRQ_REG(IT_CURLIM_LDO6, 2, 0x20),
>> + REGMAP_IRQ_REG(IT_SHORT_SWOTG, 2, 0x40),
>> + REGMAP_IRQ_REG(IT_SHORT_SWOUT, 2, 0x80),
>> +
>> + REGMAP_IRQ_REG(IT_TWARN_F, 3, 0x01),
>> + REGMAP_IRQ_REG(IT_TWARN_R, 3, 0x02),
>> + REGMAP_IRQ_REG(IT_VINLOW_F, 3, 0x04),
>> + REGMAP_IRQ_REG(IT_VINLOW_R, 3, 0x08),
>> + REGMAP_IRQ_REG(IT_SWIN_F, 3, 0x40),
>> + REGMAP_IRQ_REG(IT_SWIN_R, 3, 0x80),
>> +};
>> +
>> +static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
>> + .name = "pmic_irq",
>> + .status_base = INT_PENDING_R1,
>> + .mask_base = INT_CLEAR_MASK_R1,
>> + .unmask_base = INT_SET_MASK_R1,
>> + .ack_base = INT_CLEAR_R1,
>> + .num_regs = STPMIC1_PMIC_NUM_IRQ_REGS,
>> + .irqs = stpmic1_irqs,
>> + .num_irqs = ARRAY_SIZE(stpmic1_irqs),
>> +};
>> +
>> +static int stpmic1_probe(struct i2c_client *i2c,
>> + const struct i2c_device_id *id)
>> +{
>> + struct stpmic1 *ddata;
>> + struct device *dev = &i2c->dev;
>> + int ret;
>> + struct device_node *np = dev->of_node;
>> + u32 reg;
>> +
>> + ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL);
>> + if (!ddata)
>> + return -ENOMEM;
>> +
>> + i2c_set_clientdata(i2c, ddata);
>> + ddata->dev = dev;
>> +
>> + ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config);
>> + if (IS_ERR(ddata->regmap))
>> + return PTR_ERR(ddata->regmap);
>> +
>> + ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ);
>> + if (ddata->irq < 0) {
>> + dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq);
>> + return ddata->irq;
>> + }
>> +
>> + /* Read Version ID */
> I think the MACRO name and error message make this comment
> superfluous.
>
>> + ret = regmap_read(ddata->regmap, VERSION_SR, ®);
>> + if (ret) {
>> + dev_err(dev, "Unable to read pmic version\n");
> "PMIC"
>
>> + return ret;
>> + }
>> + dev_info(dev, "PMIC Chip Version: 0x%x\n", reg);
>> +
>> + /* Initialize PMIC IRQ Chip & IRQ domains associated */
> "associated IRQ domains"
>
>> + ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq,
>> + IRQF_ONESHOT | IRQF_SHARED,
>> + 0, &stpmic1_regmap_irq_chip,
>> + &ddata->irq_data);
>> + if (ret) {
>> + dev_err(dev, "IRQ Chip registration failed: %d\n", ret);
>> + return ret;
>> + }
>> +
>> + return devm_of_platform_populate(dev);
>> +}
>> +
>> +static const struct i2c_device_id stpmic1_id[] = {
>> + { "stpmic1"},
>> + {}
>> +};
> I don't think this is required any more.
should I replace with the following ?
static const struct of_device_id stpmic1_of_match[] = {
{ .compatible = "st,stpmic1", },
{},
};
MODULE_DEVICE_TABLE(of, stpmic1_of_match);
>> +MODULE_DEVICE_TABLE(i2c, stpmic1_id);
Thank you,
pascal
Powered by blists - more mailing lists