lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAGp9LzoT7ueXyyVSYQdWOU0JkQDWMVcwCuSE3gJnEn0fLLjCBA@mail.gmail.com>
Date:   Mon, 26 Nov 2018 23:49:26 -0800
From:   Sean Wang <sean.wang@...nel.org>
To:     hofrat@...dl.org
Cc:     Linus Walleij <linus.walleij@...aro.org>,
        sergio.paracuellos@...il.com, linux-gpio@...r.kernel.org,
        linux-kernel@...r.kernel.org, bgolaszewski@...libre.com,
        linux-mediatek@...ts.infradead.org,
        Matthias Brugger <matthias.bgg@...il.com>,
        linux-arm-kernel@...ts.infradead.org
Subject: Re: [PATCH 2/2] gpio: mt7621: pass mediatek_gpio_bank_probe() failure
 up the stack

Nicholas Mc Guire <hofrat@...dl.org> 於 2018年11月21日 週三 上午10:13寫道:
>
> The error cases of mediatek_gpio_bank_probe() would go unnoticed (except
> for the dev_err() messages). The probe function should return an error
> if one of the banks failed to initialize properly.
>
> Signed-off-by: Nicholas Mc Guire <hofrat@...dl.org>
> Fixes: 4ba9c3afda41 ("gpio: mt7621: Add a driver for MT7621")
> ---
>
> Patch was compile tested with: omega2p_defconfig, SOC_MT7621=y,
> GPIOLIB=y, GPIO_MT7621=y
>
> Patch is against 4.20-rc3 (localversion-next is next-20181121)
>
>  drivers/gpio/gpio-mt7621.c | 8 ++++++--
>  1 file changed, 6 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/gpio/gpio-mt7621.c b/drivers/gpio/gpio-mt7621.c
> index 1ec95bc..68fca8b 100644
> --- a/drivers/gpio/gpio-mt7621.c
> +++ b/drivers/gpio/gpio-mt7621.c
> @@ -297,6 +297,7 @@ mediatek_gpio_probe(struct platform_device *pdev)
>         struct device_node *np = dev->of_node;
>         struct mtk *mtk;
>         int i;
> +       int ret;
>
>         mtk = devm_kzalloc(dev, sizeof(*mtk), GFP_KERNEL);
>         if (!mtk)
> @@ -311,8 +312,11 @@ mediatek_gpio_probe(struct platform_device *pdev)
>         platform_set_drvdata(pdev, mtk);
>         mediatek_gpio_irq_chip.name = dev_name(dev);
>
> -       for (i = 0; i < MTK_BANK_CNT; i++)
> -               mediatek_gpio_bank_probe(dev, np, i);
> +       for (i = 0; i < MTK_BANK_CNT; i++) {
> +               ret = mediatek_gpio_bank_probe(dev, np, i);
> +               if (!ret)

it should be if (ret < 0) ?

> +                       return ret;
> +       }
>
>         return 0;
>  }
> --
> 2.1.4
>
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ