linux-kernel - Re: [PATCH 04/24] dt-bindings: leds: Add function and color properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <CAL_JsqK4oaUTBemXiTZzLeOKOndQ_GZp2F7mJ0VzGEKVGHY20Q@mail.gmail.com>
Date:   Fri, 30 Nov 2018 16:19:18 -0600
From:   Rob Herring <robh@...nel.org>
To:     Pavel Machek <pavel@....cz>
Cc:     Jacek Anaszewski <jacek.anaszewski@...il.com>,
        Linux LED Subsystem <linux-leds@...r.kernel.org>,
        devicetree@...r.kernel.org,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        Baolin Wang <baolin.wang@...aro.org>,
        Daniel Mack <daniel@...que.org>, Dan Murphy <dmurphy@...com>,
        Linus Walleij <linus.walleij@...aro.org>,
        Oleh Kravchenko <oleg@....org.ua>,
        Sakari Ailus <sakari.ailus@...ux.intel.com>,
        Simon Shields <simon@...eageos.org>
Subject: Re: [PATCH 04/24] dt-bindings: leds: Add function and color properties

On Fri, Nov 30, 2018 at 3:08 PM Pavel Machek <pavel@....cz> wrote:
>
> Hi!
>
> > > Pavel gave following examples:
> > >
> > > eth0:green:link
> > > adsl0:green:link
> > > adsl0:red:error
> > >
> > > So we would have e.g.:
> > >
> > > associated-vl42-device = <&camera1>;
> > > associated-network-device = <&phy1>;
> > > associated-block-device = <&phy1>;
> >
> > Variable property names are kind of a pain to parse.
>
> Ok, would it be enough to have associated-device = <&whatever>?

Yeah, but I though you needed the device type name in there.

> > Perhaps when LEDs are associated with a device, we shouldn't care
> > within the context of the LED subsystem what the name is. The
> > association is more important and if you have that exposed, then you
> > don't really need to care what the name is. You still have to deal
> > with a device with more than 1 LED, but that becomes a problem local
> > to that device.
> >
> > What I'm getting at is following a more standard binding pattern of
> > providers and consumers like we have for gpios, clocks, etc. So we'd
> > have something like this:
> >
> > ethernet {
> >   ...
> >   leds = <&green_led>, <&red_led>;
> >   led-names = "link", "err";
> > };
>
> Basically every single device could have a LED associated with it
> ("activity"). Would doing it like this mean we'd have to modify every
> single driver to parse leds / led-names properties?

Normally, that's how properties like this would work. A driver is also
what knows how the leds should function. A driver can retrieve the led
and associate it with the 'foo-bar' function. The 'foo-bar' function
then doesn't have to be defined in DT nor exposed to userspace. It
wouldn't even have to be driver specific. The driver's subsystem could
handle it all if the led functions are standardized. Though then you'd
be back to needing standard names for 'led-names', but that's no worse
that trigger names. This model would also allow getting rid of
'linux,default-trigger' properties in a lot of cases which wouldn't be
a bad thing.

However, having drivers handle this is not required. You can iterate
thru the tree for nodes with 'leds' and find the node which has a
phandle to the led node you care about. Sure, it's not that efficient,
but it does work and it's only done once. Basically, as long as the
linkage is there, we can make it work. I think using
'associated-device' might work better for the current implementation
of Linux LED support, but leds/led-names would be more inline with
other DT bindings. The current Linux implementation shouldn't dictate
the binding design.

Rob