linux-kernel - Re: [PATCH 10/14] dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V pinctrl description

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20181204231131.GA7366@bogus>
Date:   Tue, 4 Dec 2018 17:11:31 -0600
From:   Rob Herring <robh@...nel.org>
To:     Sugaya Taichi <sugaya.taichi@...ionext.com>
Cc:     linux-clk@...r.kernel.org, devicetree@...r.kernel.org,
        linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org,
        linux-serial@...r.kernel.org,
        Michael Turquette <mturquette@...libre.com>,
        Stephen Boyd <sboyd@...nel.org>,
        Mark Rutland <mark.rutland@....com>,
        Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
        Daniel Lezcano <daniel.lezcano@...aro.org>,
        Thomas Gleixner <tglx@...utronix.de>,
        Russell King <linux@...linux.org.uk>,
        Jiri Slaby <jslaby@...e.com>,
        Masami Hiramatsu <masami.hiramatsu@...aro.org>,
        Jassi Brar <jaswinder.singh@...aro.org>
Subject: Re: [PATCH 10/14] dt-bindings: pinctrl: milbeaut: Add Milbeaut M10V
 pinctrl description

On Mon, Nov 19, 2018 at 10:02:12AM +0900, Sugaya Taichi wrote:
> Add DT bindings document for Milbeaut M10V pinctrl.
> 
> Signed-off-by: Sugaya Taichi <sugaya.taichi@...ionext.com>
> ---
>  .../pinctrl/socionext,milbeaut-pinctrl.txt         | 33 ++++++++++++++++++++++
>  1 file changed, 33 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt
> 
> diff --git a/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt
> new file mode 100644
> index 0000000..7469189
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/socionext,milbeaut-pinctrl.txt
> @@ -0,0 +1,33 @@
> +Milbeaut SoCs pin controller
> +
> +Required properties:
> +- compatible: should be one of the following:
> +    "socionext,milbeaut-m10v-pinctrl"  - for m10v SoC
> +- reg: offset and length of the register set.
> +- reg-names: should be "pinctrl", "exiu".
> +- gpio-cells; should be 2.

#gpio-cells

gpio-controller?

> +- interrupt-cells: should be 2.

#interrupt-cells

interrupt-controller?

> +- clocks: phandle to the input clock.
> +- interrupts: three interrupts specifer.
> +- interrupt-names: corresponds "interrupts" factor.
> +
> +Example:
> +	pinctrl: pinctrl@...22000 {
> +		compatible = "socionext,milbeaut-m10v-pinctrl";
> +		reg = <0x1d022000 0x1000>,
> +			<0x1c26f000 0x1000>;
> +		reg-names = "pinctrl", "exiu";
> +		gpio-controller;
> +		#gpio-cells = <2>;
> +		interrupt-controller;
> +		#interrupt-cells = <2>;
> +		clocks = <&dummy_clk>;
> +		interrupts = <0 54 4>, <0 55 4>, <0 56 4>, <0 57 4>,
> +				<0 58 4>, <0 59 4>, <0 60 4>, <0 61 4>,
> +				<0 62 4>, <0 63 4>, <0 64 4>, <0 65 4>,
> +				<0 66 4>, <0 67 4>, <0 68 4>, <0 69 4>;
> +		interrupt-names = "pin-48", "pin-49", "pin-50", "pin-51",
> +				"pin-52", "pin-53", "pin-54", "pin-55",
> +				"pin-56", "pin-57", "pin-58", "pin-59",
> +				"pin-60", "pin-61", "pin-62", "pin-63";
> +	}
> -- 
> 1.9.1
>