[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAK7LNASnBobLm51VL=EVt+97-KBX3vEqXGjTH-L-q1Qn8_GUQA@mail.gmail.com>
Date: Tue, 4 Dec 2018 20:23:38 +0900
From: Masahiro Yamada <yamada.masahiro@...ionext.com>
To: sugaya.taichi@...ionext.com
Cc: linux-clk <linux-clk@...r.kernel.org>,
DTML <devicetree@...r.kernel.org>,
linux-arm-kernel <linux-arm-kernel@...ts.infradead.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
linux-serial@...r.kernel.org,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Daniel Lezcano <daniel.lezcano@...aro.org>,
Thomas Gleixner <tglx@...utronix.de>,
Russell King <linux@...linux.org.uk>,
Jiri Slaby <jslaby@...e.com>,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Jassi Brar <jaswinder.singh@...aro.org>
Subject: Re: [PATCH 11/14] pinctrl: milbeaut: Add Milbeaut M10V pinctrl
Hi Sugaya-san
On Mon, Nov 19, 2018 at 10:01 AM Sugaya Taichi
<sugaya.taichi@...ionext.com> wrote:
>
> Add Milbeaut M10V pinctrl.
> The M10V has the pins that can be used GPIOs or take multiple other
> functions.
>
> Signed-off-by: Sugaya Taichi <sugaya.taichi@...ionext.com>
This patch was sent to:
linux-clk@...r.kernel.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
linux-serial@...r.kernel.org
Unfortunately, the most important ML
linux-gpio@...r.kernel.org
was not addressed.
The pinctrl maintainer may not notice this patch.
> diff --git a/drivers/pinctrl/pinctrl-m10v.c b/drivers/pinctrl/pinctrl-m10v.c
> new file mode 100644
> index 0000000..d4ca713
> --- /dev/null
> +++ b/drivers/pinctrl/pinctrl-m10v.c
> @@ -0,0 +1,765 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2018 Socionext Ltd.
> + * Copyright (C) 2015 Linaro Ltd.
> + * Author: Jassi Brar <jaswinder.singh@...aro.org>
My company name is "Socionext Inc." instead of "Socionext Ltd."
> +static struct platform_driver m10v_pinctrl_driver = {
> + .probe = m10v_pinctrl_probe,
> + .driver = {
> + .name = "m10v-pinctrl",
> + .of_match_table = m10v_pmatch,
> + },
> +};
> +
> +static int __init m10v_pinctrl_init(void)
> +{
> + return platform_driver_register(&m10v_pinctrl_driver);
> +}
> +arch_initcall(m10v_pinctrl_init);
Can't it be builtin_platform_driver()?
Which device requires this to be arch_initcall()?
--
Best Regards
Masahiro Yamada
Powered by blists - more mailing lists