linux-kernel - Re: [PATCH] ARM: dts: at91: sama5d2 Xplained: add QSPI0 + SPI NOR memory nodes

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <22730de3-55f0-df21-312a-560a02f02dc7@microchip.com>
Date:   Tue, 11 Dec 2018 12:32:40 +0000
From:   <Tudor.Ambarus@...rochip.com>
To:     <alexandre.belloni@...tlin.com>
CC:     <Nicolas.Ferre@...rochip.com>, <Ludovic.Desroches@...rochip.com>,
        <robh+dt@...nel.org>, <mark.rutland@....com>,
        <Cyrille.Pitchen@...rochip.com>,
        <linux-arm-kernel@...ts.infradead.org>,
        <devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
        <boris.brezillon@...tlin.com>, <linux-mtd@...ts.infradead.org>,
        <broonie@...nel.org>, <linux-spi@...r.kernel.org>
Subject: Re: [PATCH] ARM: dts: at91: sama5d2 Xplained: add QSPI0 + SPI NOR
 memory nodes

Hi, Alexandre,

On 12/10/2018 11:35 PM, Alexandre Belloni wrote:
> Hi,
> 
> On 10/12/2018 17:15:29+0000, Tudor.Ambarus@...rochip.com wrote:
>> From: Cyrille Pitchen <cyrille.pitchen@...rochip.com>
>>
>> This patch configures the QSPI0 controller pin muxing and declares
>> a jedec,spi-nor memory.
>>
>> sama5d2 Xplained RevB and RevC use the Macronix MX25L25673G flash
>> memory which advertises a maximum frequency of 80MHz for Quad IO
>> Fast Read. Set the spi-max-frequency to 80MHz knowing that actually
>> the QSPI drver will set the SPI bus clock to 166MHz / 3 = 55.3MHz.
>>
>> Signed-off-by: Cyrille Pitchen <cyrille.pitchen@...rochip.com>
>> [tudor.ambarus@...rochip.com:
>> - drop partitions,
>> - add spi-rx/tx-bus-width
>> - change spi-max-frequency to match the 80MHz limit advertised by
>>   MX25L25673G for Quad IO Fast Read,
>> - reword commit message and subject.]
>> Signed-off-by: Tudor Ambarus <tudor.ambarus@...rochip.com>
>> ---
>>  arch/arm/boot/dts/at91-sama5d2_xplained.dts | 31 +++++++++++++++++++++++++++++
>>  1 file changed, 31 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/at91-sama5d2_xplained.dts b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>> index 518e2b095ccf..171bc82cfbbf 100644
>> --- a/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>> +++ b/arch/arm/boot/dts/at91-sama5d2_xplained.dts
>> @@ -108,6 +108,21 @@
>>  		};
>>  
>>  		apb {
>> +			qspi0: spi@...20000 {
>> +				pinctrl-names = "default";
>> +				pinctrl-0 = <&pinctrl_qspi0_default>;
>> +				/* status = "okay"; */ /* conflict with sdmmc1 */
> 
> Isn't that conflicting then because I think the default is okay.
qspi0 is disabled in sama5d2.dtsi.

Thanks,
ta