[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <0291f79e-b8df-f7ae-1ded-cacd404bc5fc@microchip.com>
Date: Thu, 13 Dec 2018 12:59:00 +0000
From: <Claudiu.Beznea@...rochip.com>
To: <lgirdwood@...il.com>, <broonie@...nel.org>, <robh+dt@...nel.org>,
<mark.rutland@....com>, <Nicolas.Ferre@...rochip.com>,
<alexandre.belloni@...tlin.com>, <Ludovic.Desroches@...rochip.com>
CC: <linux-kernel@...r.kernel.org>, <devicetree@...r.kernel.org>,
<linux-arm-kernel@...ts.infradead.org>
Subject: Re: [PATCH v4 0/5] add PM functionality for act8945a PMIC
Hi Mark,
I saw that previous version of this series was applied to your tree just
after I've send this new one. The only difference b/w them is in the
documentation patch where I moved the new header. No functionality change.
Sorry for the noise,
Claudiu Beznea
On 13.12.2018 14:49, Claudiu Beznea - M18063 wrote:
> From: Claudiu Beznea <claudiu.beznea@...rochip.com>
>
> This series implements PM functionality for act8945a PMIC and use that support
> on SAMA5D2 Xplained board.
>
> Changes in v4:
> - move dt-bindings/regulator/active-semi,8945a-regulator.h in documentation
> patch; driver uses macros included in this file; due to this documentation
> patch and drivers patches should go through the same tree
> - make documentation patch, patch 2 of this series
>
> Changes in v3:
> - add patch "unlock expert registers"; it was wrongly missed in previous version
>
> Changes in v2:
> - split patch 1/1 from previous series in 3 patches: one adding regmap,
> one adding pm functionality, one adding shutdown functionality
> - use dev_pm_ops suspend function to set register specific to PWRHLD line: this
> is specific to PMIC itself and not to regulators
> - add mode support for LDOs
> - add constants for mode in dt-bindings/regulator/active-semi,8945a-regulator.h
> - document modes and regulator suspend states
> - remove rdevs from struct act8945a_pmic since were not used anywhere
> - add op_mode field in struct act8945a_pmic, update it when setting mode and
> return it when reading mode (avoiding one extra register read while
> reading mode)
> - add a patch to fix a checkpatch.pl warning
> - in shutdown function use directly act8945a->regmap instead of an intermediary
> struct regmap variable
>
> Boris Brezillon (2):
> regulator: act8945a-regulator: Implement PM functionalities
> ARM: dts: at91: sama5d2_xplained: Add proper regulator states for
> suspend-to-mem
>
> Claudiu Beznea (3):
> regulator: act8945a-regulator: fix line over 80 chars warning
> regulator: act8945a-regulator: add shutdown function
> regulator: add documentation for regulator modes and suspend states
>
> .../bindings/regulator/act8945a-regulator.txt | 34 ++++
> arch/arm/boot/dts/at91-sama5d2_xplained.dts | 54 ++++++
> drivers/regulator/act8945a-regulator.c | 200 ++++++++++++++++++++-
> .../regulator/active-semi,8945a-regulator.h | 30 ++++
> 4 files changed, 312 insertions(+), 6 deletions(-)
> create mode 100644 include/dt-bindings/regulator/active-semi,8945a-regulator.h
>
Powered by blists - more mailing lists