lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20181219152647.76f77711@xps13>
Date:   Wed, 19 Dec 2018 15:26:47 +0100
From:   Miquel Raynal <miquel.raynal@...tlin.com>
To:     Naga Sureshkumar Relli <nagasure@...inx.com>
Cc:     Boris Brezillon <boris.brezillon@...tlin.com>,
        "robh@...nel.org" <robh@...nel.org>,
        "richard@....at" <richard@....at>,
        "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
        "marek.vasut@...il.com" <marek.vasut@...il.com>,
        "linux-mtd@...ts.infradead.org" <linux-mtd@...ts.infradead.org>,
        "nagasuresh12@...il.com" <nagasuresh12@...il.com>,
        Michal Simek <michals@...inx.com>,
        "computersforpeace@...il.com" <computersforpeace@...il.com>,
        "dwmw2@...radead.org" <dwmw2@...radead.org>,
        martin.lund@...p-it-simple.com
Subject: Re: [LINUX PATCH v12 3/3] mtd: rawnand: arasan: Add support for
 Arasan NAND Flash Controller

Hi Naga,

+ Martin

Naga Sureshkumar Relli <nagasure@...inx.com> wrote on Tue, 18 Dec 2018
05:33:53 +0000:

> Hi Miquel,
> 
> > -----Original Message-----
> > From: Miquel Raynal [mailto:miquel.raynal@...tlin.com]
> > Sent: Monday, December 17, 2018 10:11 PM
> > To: Naga Sureshkumar Relli <nagasure@...inx.com>
> > Cc: Boris Brezillon <boris.brezillon@...tlin.com>; robh@...nel.org; richard@....at; linux-
> > kernel@...r.kernel.org; marek.vasut@...il.com; linux-mtd@...ts.infradead.org;
> > nagasuresh12@...il.com; Michal Simek <michals@...inx.com>;
> > computersforpeace@...il.com; dwmw2@...radead.org
> > Subject: Re: [LINUX PATCH v12 3/3] mtd: rawnand: arasan: Add support for Arasan
> > NAND Flash Controller
> > 
> > Hi Naga,
> > 
> > [...]
> >   
> > > Inserted biterror @ 48/7
> > > Successfully corrected 25 bit errors per subpage Inserted biterror @
> > > 50/7 ECC failure, invalid data despite read success
> > > root@...inx-zc1751-dc2-2018_1:~#
> > >
> > > But even in this case also, driver is saying ECC failure but read success.
> > > That means controller is able to detect errors on read page up to 24 bit only.
> > > After that there is no way to say to the upper layers that the page is bad because of the  
> > limitation in the controller.
> > 
> > This is more than a "limitation", the design is broken. I am not sure how to support such
> > controller, and I am not sure if we even want to.  
> 
> The number of errors that are correctable is limited by a parameter 't'(total number of errors),
> If there is a condition that the number of errors greater than 't', then the controller won't be able to detect that.
> I guess this concept is same for other controllers as well.
> In Arasan it is limited to 24-bit.
> 
> Even, in case of Hamming, it is 1-bit error correction and 2-bit error detection.
> What will happen if there are multiple errors(greater than 2-bit)?

Ok let's use the Hamming comparison in your ECC engine case.

-> hamming:
 * 0 bf: everything is fine
 * 1 bf: will be detected, corrected, signaled
 * 2 bf: will be detected, not corrected, signaled
 * 3+ bf: don't care

-> BCH:
 * 0 bf: everything is fine
 * 1-24 bf: will be detected, corrected, signaled
 * 25 bf: everything is fine
 * 26+ bf: don't care

Do you see the problem?

In the 25 bf case, the controller is reporting that everything went
fine while it should report that it detected an uncorrectable
situation.

Here are two leads to solve this issue, please investigate them both:
1/ Talk to your colleagues that developed the RTL, ask if there is a
   hidden/reserved bit for that purpose that is not documented.
2/ Search for a status in the registers that might indicate that an
   error occurred, for instance "0 bf corrected" and "bf have been
   detected".

NB: I know that, with a BCH ECC engine, error detection at (strength +
1) is not 100% sure but statistically it will almost always be detected
and in this case we need the controller to warn the user!


Thanks,
Miquèl

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ