| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20181220170430.GU154160@art_vandelay>
Date: Thu, 20 Dec 2018 12:04:30 -0500
From: Sean Paul <sean@...rly.run>
To: Jagan Teki <jagan@...rulasolutions.com>
Cc: Sean Paul <sean@...rly.run>,
Thierry Reding <thierry.reding@...il.com>,
David Airlie <airlied@...ux.ie>,
dri-devel <dri-devel@...ts.freedesktop.org>,
linux-kernel <linux-kernel@...r.kernel.org>,
Michael Trimarchi <michael@...rulasolutions.com>,
linux-amarula@...rulasolutions.com
Subject: Re: [PATCH v3 2/2] drm/panel: Add Feiyang FY07024DI26A30-D MIPI-DSI
LCD panel
On Tue, Dec 18, 2018 at 05:06:38PM +0530, Jagan Teki wrote:
> On Sat, Dec 15, 2018 at 3:32 AM Sean Paul <sean@...rly.run> wrote:
> >
> > On Sat, Dec 15, 2018 at 02:11:01AM +0530, Jagan Teki wrote:
> > > Feiyang FY07024DI26A30-D is 1024x600, 4-lane MIPI-DSI LCD panel.
> > >
> > > Add panel driver for it.
> > >
> > > Signed-off-by: Jagan Teki <jagan@...rulasolutions.com>
> > > ---
> > > Changes for v2:
> > > - use simple structure for command init
> > > - update proper comments on power, reset delay sequnce
> > > - fix to use set_display_off in disable function
> > > - move mode type to structure
> > > - drop refres rate value, let drm compute
> > >
> > > MAINTAINERS | 6 +
> > > drivers/gpu/drm/panel/Kconfig | 9 +
> > > drivers/gpu/drm/panel/Makefile | 1 +
> > > .../drm/panel/panel-feiyang-fy07024di26a30d.c | 296 ++++++++++++++++++
> > > 4 files changed, 312 insertions(+)
> > > create mode 100644 drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> > >
> > > diff --git a/MAINTAINERS b/MAINTAINERS
> > > index d2928a4d2847..e643238855ea 100644
> > > --- a/MAINTAINERS
> > > +++ b/MAINTAINERS
> > > @@ -4732,6 +4732,12 @@ T: git git://anongit.freedesktop.org/drm/drm-misc
> > > S: Maintained
> > > F: drivers/gpu/drm/tve200/
> > >
> > > +DRM DRIVER FOR FEIYANG FY07024DI26A30-D MIPI-DSI LCD PANELS
> > > +M: Jagan Teki <jagan@...rulasolutions.com>
> > > +S: Maintained
> > > +F: drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> > > +F: Documentation/devicetree/bindings/display/panel/feiyang,fy07024di26a30d.txt
> > > +
> > > DRM DRIVER FOR ILITEK ILI9225 PANELS
> > > M: David Lechner <david@...hnology.com>
> > > S: Maintained
> >
> > As I mentioned on IRC, this will be drm-misc maintained with the other panels,
> > no need to have a dedicated MAINTAINERS entry. You'll get pulled from
> > get_maintainers.pl as a majority commit signer
>
> This I missed it on IRC, sorry will drop.
>
> >
> > > diff --git a/drivers/gpu/drm/panel/Kconfig b/drivers/gpu/drm/panel/Kconfig
> > > index d93b2ba709bc..cb8ca93550cf 100644
> > > --- a/drivers/gpu/drm/panel/Kconfig
> > > +++ b/drivers/gpu/drm/panel/Kconfig
> > > @@ -38,6 +38,15 @@ config DRM_PANEL_SIMPLE
> > > that it can be automatically turned off when the panel goes into a
> > > low power state.
> > >
> > > +config DRM_PANEL_FEIYANG_FY07024DI26A30D
> > > + tristate "Feiyang FY07024DI26A30-D MIPI-DSI LCD panel"
> > > + depends on OF
> > > + depends on DRM_MIPI_DSI
> > > + depends on BACKLIGHT_CLASS_DEVICE
> > > + help
> > > + Say Y if you want to enable support for panels based on the
> > > + Feiyang FY07024DI26A30-D MIPI-DSI interface.
> > > +
> > > config DRM_PANEL_ILITEK_IL9322
> > > tristate "Ilitek ILI9322 320x240 QVGA panels"
> > > depends on OF && SPI
> > > diff --git a/drivers/gpu/drm/panel/Makefile b/drivers/gpu/drm/panel/Makefile
> > > index 6a9b4cec1891..0fa0ef69e109 100644
> > > --- a/drivers/gpu/drm/panel/Makefile
> > > +++ b/drivers/gpu/drm/panel/Makefile
> > > @@ -2,6 +2,7 @@
> > > obj-$(CONFIG_DRM_PANEL_ARM_VERSATILE) += panel-arm-versatile.o
> > > obj-$(CONFIG_DRM_PANEL_LVDS) += panel-lvds.o
> > > obj-$(CONFIG_DRM_PANEL_SIMPLE) += panel-simple.o
> > > +obj-$(CONFIG_DRM_PANEL_FEIYANG_FY07024DI26A30D) += panel-feiyang-fy07024di26a30d.o
> > > obj-$(CONFIG_DRM_PANEL_ILITEK_IL9322) += panel-ilitek-ili9322.o
> > > obj-$(CONFIG_DRM_PANEL_ILITEK_ILI9881C) += panel-ilitek-ili9881c.o
> > > obj-$(CONFIG_DRM_PANEL_INNOLUX_P079ZCA) += panel-innolux-p079zca.o
> > > diff --git a/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> > > new file mode 100644
> > > index 000000000000..4abccbf62c3c
> > > --- /dev/null
> > > +++ b/drivers/gpu/drm/panel/panel-feiyang-fy07024di26a30d.c
> > > @@ -0,0 +1,296 @@
/snip
> > > +static const struct drm_display_mode feiyang_default_mode = {
> > > + .clock = 55000,
> > > +
> > > + .hdisplay = 1024,
> > > + .hsync_start = 1024 + 396,
> > > + .hsync_end = 1024 + 396 + 20,
> > > + .htotal = 1024 + 396 + 20 + 100,
> > > +
> > > + .vdisplay = 600,
> > > + .vsync_start = 600 + 12,
> > > + .vsync_end = 600 + 12 + 2,
> > > + .vtotal = 600 + 12 + 2 + 21,
> >
> > These timings are still incorrect, they'll give a 56.2Hz refresh rate. Is that
> > really what you want?
>
> I would like to go with same rate as of now since BSP is using the
> same, since I don't have any information from chip vendor(even I wrote
> it and waiting for response). I will update accordingly once I get the
> information from vendor.
>
> Let me know your inputs.
Not totally on board with this, tbh. It seems wrong, so I'm not sure why we'd
apply code that seems wrong. We're not in a rush, we've already cut 4.21, so I
think we should just wait for vendor confirmation on these values.
Sean
--
Sean Paul, Software Engineer, Google / Chromium OS
Powered by blists - more mailing lists