| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <CAHCN7x+w3rh91ihPc95wecATp1UoQmhC=z4R+FK9rJAkG+JWaw@mail.gmail.com>
Date: Sat, 22 Dec 2018 07:17:15 -0600
From: Adam Ford <aford173@...il.com>
To: Sebastian Reichel <sre@...nel.org>
Cc: Mauro Carvalho Chehab <mchehab@...nel.org>,
Marcel Holtmann <marcel@...tmann.org>,
Tony Lindgren <tony@...mide.com>,
Rob Herring <robh@...nel.org>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Pavel Machek <pavel@....cz>,
"open list:BLUETOOTH DRIVERS" <linux-bluetooth@...r.kernel.org>,
linux-media@...r.kernel.org, linux-omap@...r.kernel.org,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 14/14] misc: ti-st: Drop superseded driver
On Fri, Dec 21, 2018 at 9:00 PM Sebastian Reichel <sre@...nel.org> wrote:
>
> Hi,
>
> On Fri, Dec 21, 2018 at 03:10:52PM -0600, Adam Ford wrote:
> > On Fri, Dec 21, 2018 at 2:13 AM Sebastian Reichel <sre@...nel.org> wrote:
> > >
> > > From: Sebastian Reichel <sebastian.reichel@...labora.com>
> > >
> > > This driver has been superseded by the serdev based Bluetooth
> > > hci_ll driver, which is initialized from DT. All mainline users
> > > have been converted and this driver can be safely dropped.
> >
> > There seems to be an issue with my wl1283 because the
> > logicod-torpedo-37xx-devkit doesn't work with the proposed device tree
> > changes, but the older shared transport driver still works.
> > I commented on the patch that modifies the board with details of the
> > firmware timeout.
> >
> > Until this is resolved, I'd like to hold off on applying these changes.
>
> mh :/ I can't help with this, since I don't have this board (nor any
> other wl1283 based one). Is the FM part usable on that device? If
> its unusable the patchset could be splitted.
I don't have functional FM (it's not wired), so i have no issues
splitting the FM part. I'm hoping to hear from some other 1283-st
users to see if they have success.
>
> > Also, there are references to this driver inside pdata-quirks that
> > need to be removed as well once the loading and timeout issues have
> > been resolved.
>
> I dropped the pdata-quirks for TI_ST in patch 3 of this series.
My bad, sorry I missed it that part.
>
> -- Sebastian
>
adam
> >
> > adam
> > >
> > > Signed-off-by: Sebastian Reichel <sebastian.reichel@...labora.com>
> > > ---
> > > drivers/misc/Kconfig | 1 -
> > > drivers/misc/Makefile | 1 -
> > > drivers/misc/ti-st/Kconfig | 18 -
> > > drivers/misc/ti-st/Makefile | 6 -
> > > drivers/misc/ti-st/st_core.c | 922 -----------------------------------
> > > drivers/misc/ti-st/st_kim.c | 868 ---------------------------------
> > > drivers/misc/ti-st/st_ll.c | 169 -------
> > > include/linux/ti_wilink_st.h | 335 -------------
> > > 8 files changed, 2320 deletions(-)
> > > delete mode 100644 drivers/misc/ti-st/Kconfig
> > > delete mode 100644 drivers/misc/ti-st/Makefile
> > > delete mode 100644 drivers/misc/ti-st/st_core.c
> > > delete mode 100644 drivers/misc/ti-st/st_kim.c
> > > delete mode 100644 drivers/misc/ti-st/st_ll.c
> > >
> > > diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig
> > > index 3726eacdf65d..a5cc07d33c74 100644
> > > --- a/drivers/misc/Kconfig
> > > +++ b/drivers/misc/Kconfig
> > > @@ -516,7 +516,6 @@ config MISC_RTSX
> > > source "drivers/misc/c2port/Kconfig"
> > > source "drivers/misc/eeprom/Kconfig"
> > > source "drivers/misc/cb710/Kconfig"
> > > -source "drivers/misc/ti-st/Kconfig"
> > > source "drivers/misc/lis3lv02d/Kconfig"
> > > source "drivers/misc/altera-stapl/Kconfig"
> > > source "drivers/misc/mei/Kconfig"
> > > diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile
> > > index af22bbc3d00c..31c1e3eb4952 100644
> > > --- a/drivers/misc/Makefile
> > > +++ b/drivers/misc/Makefile
> > > @@ -39,7 +39,6 @@ obj-y += cb710/
> > > obj-$(CONFIG_SPEAR13XX_PCIE_GADGET) += spear13xx_pcie_gadget.o
> > > obj-$(CONFIG_VMWARE_BALLOON) += vmw_balloon.o
> > > obj-$(CONFIG_PCH_PHUB) += pch_phub.o
> > > -obj-y += ti-st/
> > > obj-y += lis3lv02d/
> > > obj-$(CONFIG_USB_SWITCH_FSA9480) += fsa9480.o
> > > obj-$(CONFIG_ALTERA_STAPL) +=altera-stapl/
> > > diff --git a/drivers/misc/ti-st/Kconfig b/drivers/misc/ti-st/Kconfig
> > > deleted file mode 100644
> > > index 5bb92698bc80..000000000000
> > > --- a/drivers/misc/ti-st/Kconfig
> > > +++ /dev/null
> > > @@ -1,18 +0,0 @@
> > > -#
> > > -# TI's shared transport line discipline and the protocol
> > > -# drivers (BT, FM and GPS)
> > > -#
> > > -menu "Texas Instruments shared transport line discipline"
> > > -config TI_ST
> > > - tristate "Shared transport core driver"
> > > - depends on NET && TTY
> > > - depends on GPIOLIB || COMPILE_TEST
> > > - select FW_LOADER
> > > - help
> > > - This enables the shared transport core driver for TI
> > > - BT / FM and GPS combo chips. This enables protocol drivers
> > > - to register themselves with core and send data, the responses
> > > - are returned to relevant protocol drivers based on their
> > > - packet types.
> > > -
> > > -endmenu
> > > diff --git a/drivers/misc/ti-st/Makefile b/drivers/misc/ti-st/Makefile
> > > deleted file mode 100644
> > > index 78d7ebb14749..000000000000
> > > --- a/drivers/misc/ti-st/Makefile
> > > +++ /dev/null
> > > @@ -1,6 +0,0 @@
> > > -#
> > > -# Makefile for TI's shared transport line discipline
> > > -# and its protocol drivers (BT, FM, GPS)
> > > -#
> > > -obj-$(CONFIG_TI_ST) += st_drv.o
> > > -st_drv-objs := st_core.o st_kim.o st_ll.o
> > > diff --git a/drivers/misc/ti-st/st_core.c b/drivers/misc/ti-st/st_core.c
> > > deleted file mode 100644
> > > index eda8d407be28..000000000000
> > > --- a/drivers/misc/ti-st/st_core.c
> > > +++ /dev/null
> > > @@ -1,922 +0,0 @@
> > > -/*
> > > - * Shared Transport Line discipline driver Core
> > > - * This hooks up ST KIM driver and ST LL driver
> > > - * Copyright (C) 2009-2010 Texas Instruments
> > > - * Author: Pavan Savoy <pavan_savoy@...com>
> > > - *
> > > - * This program is free software; you can redistribute it and/or modify
> > > - * it under the terms of the GNU General Public License version 2 as
> > > - * published by the Free Software Foundation.
> > > - *
> > > - * This program is distributed in the hope that it will be useful,
> > > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > - * GNU General Public License for more details.
> > > - *
> > > - * You should have received a copy of the GNU General Public License
> > > - * along with this program; if not, write to the Free Software
> > > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> > > - *
> > > - */
> > > -
> > > -#define pr_fmt(fmt) "(stc): " fmt
> > > -#include <linux/module.h>
> > > -#include <linux/kernel.h>
> > > -#include <linux/tty.h>
> > > -
> > > -#include <linux/seq_file.h>
> > > -#include <linux/skbuff.h>
> > > -
> > > -#include <linux/ti_wilink_st.h>
> > > -
> > > -extern void st_kim_recv(void *, const unsigned char *, long);
> > > -void st_int_recv(void *, const unsigned char *, long);
> > > -/* function pointer pointing to either,
> > > - * st_kim_recv during registration to receive fw download responses
> > > - * st_int_recv after registration to receive proto stack responses
> > > - */
> > > -static void (*st_recv) (void *, const unsigned char *, long);
> > > -
> > > -/********************************************************************/
> > > -static void add_channel_to_table(struct st_data_s *st_gdata,
> > > - struct st_proto_s *new_proto)
> > > -{
> > > - pr_info("%s: id %d\n", __func__, new_proto->chnl_id);
> > > - /* list now has the channel id as index itself */
> > > - st_gdata->list[new_proto->chnl_id] = new_proto;
> > > - st_gdata->is_registered[new_proto->chnl_id] = true;
> > > -}
> > > -
> > > -static void remove_channel_from_table(struct st_data_s *st_gdata,
> > > - struct st_proto_s *proto)
> > > -{
> > > - pr_info("%s: id %d\n", __func__, proto->chnl_id);
> > > -/* st_gdata->list[proto->chnl_id] = NULL; */
> > > - st_gdata->is_registered[proto->chnl_id] = false;
> > > -}
> > > -
> > > -/*
> > > - * called from KIM during firmware download.
> > > - *
> > > - * This is a wrapper function to tty->ops->write_room.
> > > - * It returns number of free space available in
> > > - * uart tx buffer.
> > > - */
> > > -int st_get_uart_wr_room(struct st_data_s *st_gdata)
> > > -{
> > > - struct tty_struct *tty;
> > > - if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
> > > - pr_err("tty unavailable to perform write");
> > > - return -1;
> > > - }
> > > - tty = st_gdata->tty;
> > > - return tty->ops->write_room(tty);
> > > -}
> > > -
> > > -/* can be called in from
> > > - * -- KIM (during fw download)
> > > - * -- ST Core (during st_write)
> > > - *
> > > - * This is the internal write function - a wrapper
> > > - * to tty->ops->write
> > > - */
> > > -int st_int_write(struct st_data_s *st_gdata,
> > > - const unsigned char *data, int count)
> > > -{
> > > - struct tty_struct *tty;
> > > - if (unlikely(st_gdata == NULL || st_gdata->tty == NULL)) {
> > > - pr_err("tty unavailable to perform write");
> > > - return -EINVAL;
> > > - }
> > > - tty = st_gdata->tty;
> > > -#ifdef VERBOSE
> > > - print_hex_dump(KERN_DEBUG, "<out<", DUMP_PREFIX_NONE,
> > > - 16, 1, data, count, 0);
> > > -#endif
> > > - return tty->ops->write(tty, data, count);
> > > -
> > > -}
> > > -
> > > -/*
> > > - * push the skb received to relevant
> > > - * protocol stacks
> > > - */
> > > -static void st_send_frame(unsigned char chnl_id, struct st_data_s *st_gdata)
> > > -{
> > > - pr_debug(" %s(prot:%d) ", __func__, chnl_id);
> > > -
> > > - if (unlikely
> > > - (st_gdata == NULL || st_gdata->rx_skb == NULL
> > > - || st_gdata->is_registered[chnl_id] == false)) {
> > > - pr_err("chnl_id %d not registered, no data to send?",
> > > - chnl_id);
> > > - kfree_skb(st_gdata->rx_skb);
> > > - return;
> > > - }
> > > - /* this cannot fail
> > > - * this shouldn't take long
> > > - * - should be just skb_queue_tail for the
> > > - * protocol stack driver
> > > - */
> > > - if (likely(st_gdata->list[chnl_id]->recv != NULL)) {
> > > - if (unlikely
> > > - (st_gdata->list[chnl_id]->recv
> > > - (st_gdata->list[chnl_id]->priv_data, st_gdata->rx_skb)
> > > - != 0)) {
> > > - pr_err(" proto stack %d's ->recv failed", chnl_id);
> > > - kfree_skb(st_gdata->rx_skb);
> > > - return;
> > > - }
> > > - } else {
> > > - pr_err(" proto stack %d's ->recv null", chnl_id);
> > > - kfree_skb(st_gdata->rx_skb);
> > > - }
> > > - return;
> > > -}
> > > -
> > > -/**
> > > - * st_reg_complete -
> > > - * to call registration complete callbacks
> > > - * of all protocol stack drivers
> > > - * This function is being called with spin lock held, protocol drivers are
> > > - * only expected to complete their waits and do nothing more than that.
> > > - */
> > > -static void st_reg_complete(struct st_data_s *st_gdata, int err)
> > > -{
> > > - unsigned char i = 0;
> > > - pr_info(" %s ", __func__);
> > > - for (i = 0; i < ST_MAX_CHANNELS; i++) {
> > > - if (likely(st_gdata != NULL &&
> > > - st_gdata->is_registered[i] == true &&
> > > - st_gdata->list[i]->reg_complete_cb != NULL)) {
> > > - st_gdata->list[i]->reg_complete_cb
> > > - (st_gdata->list[i]->priv_data, err);
> > > - pr_info("protocol %d's cb sent %d\n", i, err);
> > > - if (err) { /* cleanup registered protocol */
> > > - st_gdata->is_registered[i] = false;
> > > - if (st_gdata->protos_registered)
> > > - st_gdata->protos_registered--;
> > > - }
> > > - }
> > > - }
> > > -}
> > > -
> > > -static inline int st_check_data_len(struct st_data_s *st_gdata,
> > > - unsigned char chnl_id, int len)
> > > -{
> > > - int room = skb_tailroom(st_gdata->rx_skb);
> > > -
> > > - pr_debug("len %d room %d", len, room);
> > > -
> > > - if (!len) {
> > > - /* Received packet has only packet header and
> > > - * has zero length payload. So, ask ST CORE to
> > > - * forward the packet to protocol driver (BT/FM/GPS)
> > > - */
> > > - st_send_frame(chnl_id, st_gdata);
> > > -
> > > - } else if (len > room) {
> > > - /* Received packet's payload length is larger.
> > > - * We can't accommodate it in created skb.
> > > - */
> > > - pr_err("Data length is too large len %d room %d", len,
> > > - room);
> > > - kfree_skb(st_gdata->rx_skb);
> > > - } else {
> > > - /* Packet header has non-zero payload length and
> > > - * we have enough space in created skb. Lets read
> > > - * payload data */
> > > - st_gdata->rx_state = ST_W4_DATA;
> > > - st_gdata->rx_count = len;
> > > - return len;
> > > - }
> > > -
> > > - /* Change ST state to continue to process next
> > > - * packet */
> > > - st_gdata->rx_state = ST_W4_PACKET_TYPE;
> > > - st_gdata->rx_skb = NULL;
> > > - st_gdata->rx_count = 0;
> > > - st_gdata->rx_chnl = 0;
> > > -
> > > - return 0;
> > > -}
> > > -
> > > -/**
> > > - * st_wakeup_ack - internal function for action when wake-up ack
> > > - * received
> > > - */
> > > -static inline void st_wakeup_ack(struct st_data_s *st_gdata,
> > > - unsigned char cmd)
> > > -{
> > > - struct sk_buff *waiting_skb;
> > > - unsigned long flags = 0;
> > > -
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > - /* de-Q from waitQ and Q in txQ now that the
> > > - * chip is awake
> > > - */
> > > - while ((waiting_skb = skb_dequeue(&st_gdata->tx_waitq)))
> > > - skb_queue_tail(&st_gdata->txq, waiting_skb);
> > > -
> > > - /* state forwarded to ST LL */
> > > - st_ll_sleep_state(st_gdata, (unsigned long)cmd);
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > -
> > > - /* wake up to send the recently copied skbs from waitQ */
> > > - st_tx_wakeup(st_gdata);
> > > -}
> > > -
> > > -/**
> > > - * st_int_recv - ST's internal receive function.
> > > - * Decodes received RAW data and forwards to corresponding
> > > - * client drivers (Bluetooth,FM,GPS..etc).
> > > - * This can receive various types of packets,
> > > - * HCI-Events, ACL, SCO, 4 types of HCI-LL PM packets
> > > - * CH-8 packets from FM, CH-9 packets from GPS cores.
> > > - */
> > > -void st_int_recv(void *disc_data,
> > > - const unsigned char *data, long count)
> > > -{
> > > - char *ptr;
> > > - struct st_proto_s *proto;
> > > - unsigned short payload_len = 0;
> > > - int len = 0;
> > > - unsigned char type = 0;
> > > - unsigned char *plen;
> > > - struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
> > > - unsigned long flags;
> > > -
> > > - ptr = (char *)data;
> > > - /* tty_receive sent null ? */
> > > - if (unlikely(ptr == NULL) || (st_gdata == NULL)) {
> > > - pr_err(" received null from TTY ");
> > > - return;
> > > - }
> > > -
> > > - pr_debug("count %ld rx_state %ld"
> > > - "rx_count %ld", count, st_gdata->rx_state,
> > > - st_gdata->rx_count);
> > > -
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > - /* Decode received bytes here */
> > > - while (count) {
> > > - if (st_gdata->rx_count) {
> > > - len = min_t(unsigned int, st_gdata->rx_count, count);
> > > - skb_put_data(st_gdata->rx_skb, ptr, len);
> > > - st_gdata->rx_count -= len;
> > > - count -= len;
> > > - ptr += len;
> > > -
> > > - if (st_gdata->rx_count)
> > > - continue;
> > > -
> > > - /* Check ST RX state machine , where are we? */
> > > - switch (st_gdata->rx_state) {
> > > - /* Waiting for complete packet ? */
> > > - case ST_W4_DATA:
> > > - pr_debug("Complete pkt received");
> > > - /* Ask ST CORE to forward
> > > - * the packet to protocol driver */
> > > - st_send_frame(st_gdata->rx_chnl, st_gdata);
> > > -
> > > - st_gdata->rx_state = ST_W4_PACKET_TYPE;
> > > - st_gdata->rx_skb = NULL;
> > > - continue;
> > > - /* parse the header to know details */
> > > - case ST_W4_HEADER:
> > > - proto = st_gdata->list[st_gdata->rx_chnl];
> > > - plen =
> > > - &st_gdata->rx_skb->data
> > > - [proto->offset_len_in_hdr];
> > > - pr_debug("plen pointing to %x\n", *plen);
> > > - if (proto->len_size == 1)/* 1 byte len field */
> > > - payload_len = *(unsigned char *)plen;
> > > - else if (proto->len_size == 2)
> > > - payload_len =
> > > - __le16_to_cpu(*(unsigned short *)plen);
> > > - else
> > > - pr_info("%s: invalid length "
> > > - "for id %d\n",
> > > - __func__, proto->chnl_id);
> > > - st_check_data_len(st_gdata, proto->chnl_id,
> > > - payload_len);
> > > - pr_debug("off %d, pay len %d\n",
> > > - proto->offset_len_in_hdr, payload_len);
> > > - continue;
> > > - } /* end of switch rx_state */
> > > - }
> > > -
> > > - /* end of if rx_count */
> > > - /* Check first byte of packet and identify module
> > > - * owner (BT/FM/GPS) */
> > > - switch (*ptr) {
> > > - case LL_SLEEP_IND:
> > > - case LL_SLEEP_ACK:
> > > - case LL_WAKE_UP_IND:
> > > - pr_debug("PM packet");
> > > - /* this takes appropriate action based on
> > > - * sleep state received --
> > > - */
> > > - st_ll_sleep_state(st_gdata, *ptr);
> > > - /* if WAKEUP_IND collides copy from waitq to txq
> > > - * and assume chip awake
> > > - */
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - if (st_ll_getstate(st_gdata) == ST_LL_AWAKE)
> > > - st_wakeup_ack(st_gdata, LL_WAKE_UP_ACK);
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > -
> > > - ptr++;
> > > - count--;
> > > - continue;
> > > - case LL_WAKE_UP_ACK:
> > > - pr_debug("PM packet");
> > > -
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - /* wake up ack received */
> > > - st_wakeup_ack(st_gdata, *ptr);
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > -
> > > - ptr++;
> > > - count--;
> > > - continue;
> > > - /* Unknow packet? */
> > > - default:
> > > - type = *ptr;
> > > -
> > > - /* Default case means non-HCILL packets,
> > > - * possibilities are packets for:
> > > - * (a) valid protocol - Supported Protocols within
> > > - * the ST_MAX_CHANNELS.
> > > - * (b) registered protocol - Checked by
> > > - * "st_gdata->list[type] == NULL)" are supported
> > > - * protocols only.
> > > - * Rules out any invalid protocol and
> > > - * unregistered protocols with channel ID < 16.
> > > - */
> > > -
> > > - if ((type >= ST_MAX_CHANNELS) ||
> > > - (st_gdata->list[type] == NULL)) {
> > > - pr_err("chip/interface misbehavior: "
> > > - "dropping frame starting "
> > > - "with 0x%02x\n", type);
> > > - goto done;
> > > - }
> > > -
> > > - st_gdata->rx_skb = alloc_skb(
> > > - st_gdata->list[type]->max_frame_size,
> > > - GFP_ATOMIC);
> > > - if (st_gdata->rx_skb == NULL) {
> > > - pr_err("out of memory: dropping\n");
> > > - goto done;
> > > - }
> > > -
> > > - skb_reserve(st_gdata->rx_skb,
> > > - st_gdata->list[type]->reserve);
> > > - /* next 2 required for BT only */
> > > - st_gdata->rx_skb->cb[0] = type; /*pkt_type*/
> > > - st_gdata->rx_skb->cb[1] = 0; /*incoming*/
> > > - st_gdata->rx_chnl = *ptr;
> > > - st_gdata->rx_state = ST_W4_HEADER;
> > > - st_gdata->rx_count = st_gdata->list[type]->hdr_len;
> > > - pr_debug("rx_count %ld\n", st_gdata->rx_count);
> > > - };
> > > - ptr++;
> > > - count--;
> > > - }
> > > -done:
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - pr_debug("done %s", __func__);
> > > - return;
> > > -}
> > > -
> > > -/**
> > > - * st_int_dequeue - internal de-Q function.
> > > - * If the previous data set was not written
> > > - * completely, return that skb which has the pending data.
> > > - * In normal cases, return top of txq.
> > > - */
> > > -static struct sk_buff *st_int_dequeue(struct st_data_s *st_gdata)
> > > -{
> > > - struct sk_buff *returning_skb;
> > > -
> > > - pr_debug("%s", __func__);
> > > - if (st_gdata->tx_skb != NULL) {
> > > - returning_skb = st_gdata->tx_skb;
> > > - st_gdata->tx_skb = NULL;
> > > - return returning_skb;
> > > - }
> > > - return skb_dequeue(&st_gdata->txq);
> > > -}
> > > -
> > > -/**
> > > - * st_int_enqueue - internal Q-ing function.
> > > - * Will either Q the skb to txq or the tx_waitq
> > > - * depending on the ST LL state.
> > > - * If the chip is asleep, then Q it onto waitq and
> > > - * wakeup the chip.
> > > - * txq and waitq needs protection since the other contexts
> > > - * may be sending data, waking up chip.
> > > - */
> > > -static void st_int_enqueue(struct st_data_s *st_gdata, struct sk_buff *skb)
> > > -{
> > > - unsigned long flags = 0;
> > > -
> > > - pr_debug("%s", __func__);
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > -
> > > - switch (st_ll_getstate(st_gdata)) {
> > > - case ST_LL_AWAKE:
> > > - pr_debug("ST LL is AWAKE, sending normally");
> > > - skb_queue_tail(&st_gdata->txq, skb);
> > > - break;
> > > - case ST_LL_ASLEEP_TO_AWAKE:
> > > - skb_queue_tail(&st_gdata->tx_waitq, skb);
> > > - break;
> > > - case ST_LL_AWAKE_TO_ASLEEP:
> > > - pr_err("ST LL is illegal state(%ld),"
> > > - "purging received skb.", st_ll_getstate(st_gdata));
> > > - kfree_skb(skb);
> > > - break;
> > > - case ST_LL_ASLEEP:
> > > - skb_queue_tail(&st_gdata->tx_waitq, skb);
> > > - st_ll_wakeup(st_gdata);
> > > - break;
> > > - default:
> > > - pr_err("ST LL is illegal state(%ld),"
> > > - "purging received skb.", st_ll_getstate(st_gdata));
> > > - kfree_skb(skb);
> > > - break;
> > > - }
> > > -
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - pr_debug("done %s", __func__);
> > > - return;
> > > -}
> > > -
> > > -/*
> > > - * internal wakeup function
> > > - * called from either
> > > - * - TTY layer when write's finished
> > > - * - st_write (in context of the protocol stack)
> > > - */
> > > -static void work_fn_write_wakeup(struct work_struct *work)
> > > -{
> > > - struct st_data_s *st_gdata = container_of(work, struct st_data_s,
> > > - work_write_wakeup);
> > > -
> > > - st_tx_wakeup((void *)st_gdata);
> > > -}
> > > -void st_tx_wakeup(struct st_data_s *st_data)
> > > -{
> > > - struct sk_buff *skb;
> > > - unsigned long flags; /* for irq save flags */
> > > - pr_debug("%s", __func__);
> > > - /* check for sending & set flag sending here */
> > > - if (test_and_set_bit(ST_TX_SENDING, &st_data->tx_state)) {
> > > - pr_debug("ST already sending");
> > > - /* keep sending */
> > > - set_bit(ST_TX_WAKEUP, &st_data->tx_state);
> > > - return;
> > > - /* TX_WAKEUP will be checked in another
> > > - * context
> > > - */
> > > - }
> > > - do { /* come back if st_tx_wakeup is set */
> > > - /* woke-up to write */
> > > - clear_bit(ST_TX_WAKEUP, &st_data->tx_state);
> > > - while ((skb = st_int_dequeue(st_data))) {
> > > - int len;
> > > - spin_lock_irqsave(&st_data->lock, flags);
> > > - /* enable wake-up from TTY */
> > > - set_bit(TTY_DO_WRITE_WAKEUP, &st_data->tty->flags);
> > > - len = st_int_write(st_data, skb->data, skb->len);
> > > - skb_pull(skb, len);
> > > - /* if skb->len = len as expected, skb->len=0 */
> > > - if (skb->len) {
> > > - /* would be the next skb to be sent */
> > > - st_data->tx_skb = skb;
> > > - spin_unlock_irqrestore(&st_data->lock, flags);
> > > - break;
> > > - }
> > > - kfree_skb(skb);
> > > - spin_unlock_irqrestore(&st_data->lock, flags);
> > > - }
> > > - /* if wake-up is set in another context- restart sending */
> > > - } while (test_bit(ST_TX_WAKEUP, &st_data->tx_state));
> > > -
> > > - /* clear flag sending */
> > > - clear_bit(ST_TX_SENDING, &st_data->tx_state);
> > > -}
> > > -
> > > -/********************************************************************/
> > > -/* functions called from ST KIM
> > > -*/
> > > -void kim_st_list_protocols(struct st_data_s *st_gdata, void *buf)
> > > -{
> > > - seq_printf(buf, "[%d]\nBT=%c\nFM=%c\nGPS=%c\n",
> > > - st_gdata->protos_registered,
> > > - st_gdata->is_registered[0x04] == true ? 'R' : 'U',
> > > - st_gdata->is_registered[0x08] == true ? 'R' : 'U',
> > > - st_gdata->is_registered[0x09] == true ? 'R' : 'U');
> > > -}
> > > -
> > > -/********************************************************************/
> > > -/*
> > > - * functions called from protocol stack drivers
> > > - * to be EXPORT-ed
> > > - */
> > > -long st_register(struct st_proto_s *new_proto)
> > > -{
> > > - struct st_data_s *st_gdata;
> > > - long err = 0;
> > > - unsigned long flags = 0;
> > > -
> > > - st_kim_ref(&st_gdata, 0);
> > > - if (st_gdata == NULL || new_proto == NULL || new_proto->recv == NULL
> > > - || new_proto->reg_complete_cb == NULL) {
> > > - pr_err("gdata/new_proto/recv or reg_complete_cb not ready");
> > > - return -EINVAL;
> > > - }
> > > -
> > > - if (new_proto->chnl_id >= ST_MAX_CHANNELS) {
> > > - pr_err("chnl_id %d not supported", new_proto->chnl_id);
> > > - return -EPROTONOSUPPORT;
> > > - }
> > > -
> > > - if (st_gdata->is_registered[new_proto->chnl_id] == true) {
> > > - pr_err("chnl_id %d already registered", new_proto->chnl_id);
> > > - return -EALREADY;
> > > - }
> > > -
> > > - /* can be from process context only */
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > -
> > > - if (test_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state)) {
> > > - pr_info(" ST_REG_IN_PROGRESS:%d ", new_proto->chnl_id);
> > > - /* fw download in progress */
> > > -
> > > - add_channel_to_table(st_gdata, new_proto);
> > > - st_gdata->protos_registered++;
> > > - new_proto->write = st_write;
> > > -
> > > - set_bit(ST_REG_PENDING, &st_gdata->st_state);
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - return -EINPROGRESS;
> > > - } else if (st_gdata->protos_registered == ST_EMPTY) {
> > > - pr_info(" chnl_id list empty :%d ", new_proto->chnl_id);
> > > - set_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
> > > - st_recv = st_kim_recv;
> > > -
> > > - /* enable the ST LL - to set default chip state */
> > > - st_ll_enable(st_gdata);
> > > -
> > > - /* release lock previously held - re-locked below */
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > -
> > > - /* this may take a while to complete
> > > - * since it involves BT fw download
> > > - */
> > > - err = st_kim_start(st_gdata->kim_data);
> > > - if (err != 0) {
> > > - clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
> > > - if ((st_gdata->protos_registered != ST_EMPTY) &&
> > > - (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
> > > - pr_err(" KIM failure complete callback ");
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > - st_reg_complete(st_gdata, err);
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - clear_bit(ST_REG_PENDING, &st_gdata->st_state);
> > > - }
> > > - return -EINVAL;
> > > - }
> > > -
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > -
> > > - clear_bit(ST_REG_IN_PROGRESS, &st_gdata->st_state);
> > > - st_recv = st_int_recv;
> > > -
> > > - /* this is where all pending registration
> > > - * are signalled to be complete by calling callback functions
> > > - */
> > > - if ((st_gdata->protos_registered != ST_EMPTY) &&
> > > - (test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
> > > - pr_debug(" call reg complete callback ");
> > > - st_reg_complete(st_gdata, 0);
> > > - }
> > > - clear_bit(ST_REG_PENDING, &st_gdata->st_state);
> > > -
> > > - /* check for already registered once more,
> > > - * since the above check is old
> > > - */
> > > - if (st_gdata->is_registered[new_proto->chnl_id] == true) {
> > > - pr_err(" proto %d already registered ",
> > > - new_proto->chnl_id);
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - return -EALREADY;
> > > - }
> > > -
> > > - add_channel_to_table(st_gdata, new_proto);
> > > - st_gdata->protos_registered++;
> > > - new_proto->write = st_write;
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - return err;
> > > - }
> > > - /* if fw is already downloaded & new stack registers protocol */
> > > - else {
> > > - add_channel_to_table(st_gdata, new_proto);
> > > - st_gdata->protos_registered++;
> > > - new_proto->write = st_write;
> > > -
> > > - /* lock already held before entering else */
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - return err;
> > > - }
> > > -}
> > > -EXPORT_SYMBOL_GPL(st_register);
> > > -
> > > -/* to unregister a protocol -
> > > - * to be called from protocol stack driver
> > > - */
> > > -long st_unregister(struct st_proto_s *proto)
> > > -{
> > > - long err = 0;
> > > - unsigned long flags = 0;
> > > - struct st_data_s *st_gdata;
> > > -
> > > - pr_debug("%s: %d ", __func__, proto->chnl_id);
> > > -
> > > - st_kim_ref(&st_gdata, 0);
> > > - if (!st_gdata || proto->chnl_id >= ST_MAX_CHANNELS) {
> > > - pr_err(" chnl_id %d not supported", proto->chnl_id);
> > > - return -EPROTONOSUPPORT;
> > > - }
> > > -
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > -
> > > - if (st_gdata->is_registered[proto->chnl_id] == false) {
> > > - pr_err(" chnl_id %d not registered", proto->chnl_id);
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - return -EPROTONOSUPPORT;
> > > - }
> > > -
> > > - if (st_gdata->protos_registered)
> > > - st_gdata->protos_registered--;
> > > -
> > > - remove_channel_from_table(st_gdata, proto);
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > -
> > > - if ((st_gdata->protos_registered == ST_EMPTY) &&
> > > - (!test_bit(ST_REG_PENDING, &st_gdata->st_state))) {
> > > - pr_info(" all chnl_ids unregistered ");
> > > -
> > > - /* stop traffic on tty */
> > > - if (st_gdata->tty) {
> > > - tty_ldisc_flush(st_gdata->tty);
> > > - stop_tty(st_gdata->tty);
> > > - }
> > > -
> > > - /* all chnl_ids now unregistered */
> > > - st_kim_stop(st_gdata->kim_data);
> > > - /* disable ST LL */
> > > - st_ll_disable(st_gdata);
> > > - }
> > > - return err;
> > > -}
> > > -
> > > -/*
> > > - * called in protocol stack drivers
> > > - * via the write function pointer
> > > - */
> > > -long st_write(struct sk_buff *skb)
> > > -{
> > > - struct st_data_s *st_gdata;
> > > - long len;
> > > -
> > > - st_kim_ref(&st_gdata, 0);
> > > - if (unlikely(skb == NULL || st_gdata == NULL
> > > - || st_gdata->tty == NULL)) {
> > > - pr_err("data/tty unavailable to perform write");
> > > - return -EINVAL;
> > > - }
> > > -
> > > - pr_debug("%d to be written", skb->len);
> > > - len = skb->len;
> > > -
> > > - /* st_ll to decide where to enqueue the skb */
> > > - st_int_enqueue(st_gdata, skb);
> > > - /* wake up */
> > > - st_tx_wakeup(st_gdata);
> > > -
> > > - /* return number of bytes written */
> > > - return len;
> > > -}
> > > -
> > > -/* for protocols making use of shared transport */
> > > -EXPORT_SYMBOL_GPL(st_unregister);
> > > -
> > > -/********************************************************************/
> > > -/*
> > > - * functions called from TTY layer
> > > - */
> > > -static int st_tty_open(struct tty_struct *tty)
> > > -{
> > > - int err = 0;
> > > - struct st_data_s *st_gdata;
> > > - pr_info("%s ", __func__);
> > > -
> > > - st_kim_ref(&st_gdata, 0);
> > > - st_gdata->tty = tty;
> > > - tty->disc_data = st_gdata;
> > > -
> > > - /* don't do an wakeup for now */
> > > - clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
> > > -
> > > - /* mem already allocated
> > > - */
> > > - tty->receive_room = 65536;
> > > - /* Flush any pending characters in the driver and discipline. */
> > > - tty_ldisc_flush(tty);
> > > - tty_driver_flush_buffer(tty);
> > > - /*
> > > - * signal to UIM via KIM that -
> > > - * installation of N_TI_WL ldisc is complete
> > > - */
> > > - st_kim_complete(st_gdata->kim_data);
> > > - pr_debug("done %s", __func__);
> > > - return err;
> > > -}
> > > -
> > > -static void st_tty_close(struct tty_struct *tty)
> > > -{
> > > - unsigned char i = ST_MAX_CHANNELS;
> > > - unsigned long flags = 0;
> > > - struct st_data_s *st_gdata = tty->disc_data;
> > > -
> > > - pr_info("%s ", __func__);
> > > -
> > > - /* TODO:
> > > - * if a protocol has been registered & line discipline
> > > - * un-installed for some reason - what should be done ?
> > > - */
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > - for (i = ST_BT; i < ST_MAX_CHANNELS; i++) {
> > > - if (st_gdata->is_registered[i] == true)
> > > - pr_err("%d not un-registered", i);
> > > - st_gdata->list[i] = NULL;
> > > - st_gdata->is_registered[i] = false;
> > > - }
> > > - st_gdata->protos_registered = 0;
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > - /*
> > > - * signal to UIM via KIM that -
> > > - * N_TI_WL ldisc is un-installed
> > > - */
> > > - st_kim_complete(st_gdata->kim_data);
> > > - st_gdata->tty = NULL;
> > > - /* Flush any pending characters in the driver and discipline. */
> > > - tty_ldisc_flush(tty);
> > > - tty_driver_flush_buffer(tty);
> > > -
> > > - spin_lock_irqsave(&st_gdata->lock, flags);
> > > - /* empty out txq and tx_waitq */
> > > - skb_queue_purge(&st_gdata->txq);
> > > - skb_queue_purge(&st_gdata->tx_waitq);
> > > - /* reset the TTY Rx states of ST */
> > > - st_gdata->rx_count = 0;
> > > - st_gdata->rx_state = ST_W4_PACKET_TYPE;
> > > - kfree_skb(st_gdata->rx_skb);
> > > - st_gdata->rx_skb = NULL;
> > > - spin_unlock_irqrestore(&st_gdata->lock, flags);
> > > -
> > > - pr_debug("%s: done ", __func__);
> > > -}
> > > -
> > > -static void st_tty_receive(struct tty_struct *tty, const unsigned char *data,
> > > - char *tty_flags, int count)
> > > -{
> > > -#ifdef VERBOSE
> > > - print_hex_dump(KERN_DEBUG, ">in>", DUMP_PREFIX_NONE,
> > > - 16, 1, data, count, 0);
> > > -#endif
> > > -
> > > - /*
> > > - * if fw download is in progress then route incoming data
> > > - * to KIM for validation
> > > - */
> > > - st_recv(tty->disc_data, data, count);
> > > - pr_debug("done %s", __func__);
> > > -}
> > > -
> > > -/* wake-up function called in from the TTY layer
> > > - * inside the internal wakeup function will be called
> > > - */
> > > -static void st_tty_wakeup(struct tty_struct *tty)
> > > -{
> > > - struct st_data_s *st_gdata = tty->disc_data;
> > > - pr_debug("%s ", __func__);
> > > - /* don't do an wakeup for now */
> > > - clear_bit(TTY_DO_WRITE_WAKEUP, &tty->flags);
> > > -
> > > - /*
> > > - * schedule the internal wakeup instead of calling directly to
> > > - * avoid lockup (port->lock needed in tty->ops->write is
> > > - * already taken here
> > > - */
> > > - schedule_work(&st_gdata->work_write_wakeup);
> > > -}
> > > -
> > > -static void st_tty_flush_buffer(struct tty_struct *tty)
> > > -{
> > > - struct st_data_s *st_gdata = tty->disc_data;
> > > - pr_debug("%s ", __func__);
> > > -
> > > - kfree_skb(st_gdata->tx_skb);
> > > - st_gdata->tx_skb = NULL;
> > > -
> > > - tty_driver_flush_buffer(tty);
> > > - return;
> > > -}
> > > -
> > > -static struct tty_ldisc_ops st_ldisc_ops = {
> > > - .magic = TTY_LDISC_MAGIC,
> > > - .name = "n_st",
> > > - .open = st_tty_open,
> > > - .close = st_tty_close,
> > > - .receive_buf = st_tty_receive,
> > > - .write_wakeup = st_tty_wakeup,
> > > - .flush_buffer = st_tty_flush_buffer,
> > > - .owner = THIS_MODULE
> > > -};
> > > -
> > > -/********************************************************************/
> > > -int st_core_init(struct st_data_s **core_data)
> > > -{
> > > - struct st_data_s *st_gdata;
> > > - long err;
> > > -
> > > - err = tty_register_ldisc(N_TI_WL, &st_ldisc_ops);
> > > - if (err) {
> > > - pr_err("error registering %d line discipline %ld",
> > > - N_TI_WL, err);
> > > - return err;
> > > - }
> > > - pr_debug("registered n_shared line discipline");
> > > -
> > > - st_gdata = kzalloc(sizeof(struct st_data_s), GFP_KERNEL);
> > > - if (!st_gdata) {
> > > - pr_err("memory allocation failed");
> > > - err = tty_unregister_ldisc(N_TI_WL);
> > > - if (err)
> > > - pr_err("unable to un-register ldisc %ld", err);
> > > - err = -ENOMEM;
> > > - return err;
> > > - }
> > > -
> > > - /* Initialize ST TxQ and Tx waitQ queue head. All BT/FM/GPS module skb's
> > > - * will be pushed in this queue for actual transmission.
> > > - */
> > > - skb_queue_head_init(&st_gdata->txq);
> > > - skb_queue_head_init(&st_gdata->tx_waitq);
> > > -
> > > - /* Locking used in st_int_enqueue() to avoid multiple execution */
> > > - spin_lock_init(&st_gdata->lock);
> > > -
> > > - err = st_ll_init(st_gdata);
> > > - if (err) {
> > > - pr_err("error during st_ll initialization(%ld)", err);
> > > - kfree(st_gdata);
> > > - err = tty_unregister_ldisc(N_TI_WL);
> > > - if (err)
> > > - pr_err("unable to un-register ldisc");
> > > - return err;
> > > - }
> > > -
> > > - INIT_WORK(&st_gdata->work_write_wakeup, work_fn_write_wakeup);
> > > -
> > > - *core_data = st_gdata;
> > > - return 0;
> > > -}
> > > -
> > > -void st_core_exit(struct st_data_s *st_gdata)
> > > -{
> > > - long err;
> > > - /* internal module cleanup */
> > > - err = st_ll_deinit(st_gdata);
> > > - if (err)
> > > - pr_err("error during deinit of ST LL %ld", err);
> > > -
> > > - if (st_gdata != NULL) {
> > > - /* Free ST Tx Qs and skbs */
> > > - skb_queue_purge(&st_gdata->txq);
> > > - skb_queue_purge(&st_gdata->tx_waitq);
> > > - kfree_skb(st_gdata->rx_skb);
> > > - kfree_skb(st_gdata->tx_skb);
> > > - /* TTY ldisc cleanup */
> > > - err = tty_unregister_ldisc(N_TI_WL);
> > > - if (err)
> > > - pr_err("unable to un-register ldisc %ld", err);
> > > - /* free the global data pointer */
> > > - kfree(st_gdata);
> > > - }
> > > -}
> > > diff --git a/drivers/misc/ti-st/st_kim.c b/drivers/misc/ti-st/st_kim.c
> > > deleted file mode 100644
> > > index 1874ac922166..000000000000
> > > --- a/drivers/misc/ti-st/st_kim.c
> > > +++ /dev/null
> > > @@ -1,868 +0,0 @@
> > > -/*
> > > - * Shared Transport Line discipline driver Core
> > > - * Init Manager module responsible for GPIO control
> > > - * and firmware download
> > > - * Copyright (C) 2009-2010 Texas Instruments
> > > - * Author: Pavan Savoy <pavan_savoy@...com>
> > > - *
> > > - * This program is free software; you can redistribute it and/or modify
> > > - * it under the terms of the GNU General Public License version 2 as
> > > - * published by the Free Software Foundation.
> > > - *
> > > - * This program is distributed in the hope that it will be useful,
> > > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > - * GNU General Public License for more details.
> > > - *
> > > - * You should have received a copy of the GNU General Public License
> > > - * along with this program; if not, write to the Free Software
> > > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> > > - *
> > > - */
> > > -
> > > -#define pr_fmt(fmt) "(stk) :" fmt
> > > -#include <linux/platform_device.h>
> > > -#include <linux/jiffies.h>
> > > -#include <linux/firmware.h>
> > > -#include <linux/delay.h>
> > > -#include <linux/wait.h>
> > > -#include <linux/gpio.h>
> > > -#include <linux/debugfs.h>
> > > -#include <linux/seq_file.h>
> > > -#include <linux/sched.h>
> > > -#include <linux/sysfs.h>
> > > -#include <linux/tty.h>
> > > -
> > > -#include <linux/skbuff.h>
> > > -#include <linux/ti_wilink_st.h>
> > > -#include <linux/module.h>
> > > -
> > > -#define MAX_ST_DEVICES 3 /* Imagine 1 on each UART for now */
> > > -static struct platform_device *st_kim_devices[MAX_ST_DEVICES];
> > > -
> > > -/**********************************************************************/
> > > -/* internal functions */
> > > -
> > > -/**
> > > - * st_get_plat_device -
> > > - * function which returns the reference to the platform device
> > > - * requested by id. As of now only 1 such device exists (id=0)
> > > - * the context requesting for reference can get the id to be
> > > - * requested by a. The protocol driver which is registering or
> > > - * b. the tty device which is opened.
> > > - */
> > > -static struct platform_device *st_get_plat_device(int id)
> > > -{
> > > - return st_kim_devices[id];
> > > -}
> > > -
> > > -/**
> > > - * validate_firmware_response -
> > > - * function to return whether the firmware response was proper
> > > - * in case of error don't complete so that waiting for proper
> > > - * response times out
> > > - */
> > > -static void validate_firmware_response(struct kim_data_s *kim_gdata)
> > > -{
> > > - struct sk_buff *skb = kim_gdata->rx_skb;
> > > - if (!skb)
> > > - return;
> > > -
> > > - /* these magic numbers are the position in the response buffer which
> > > - * allows us to distinguish whether the response is for the read
> > > - * version info. command
> > > - */
> > > - if (skb->data[2] == 0x01 && skb->data[3] == 0x01 &&
> > > - skb->data[4] == 0x10 && skb->data[5] == 0x00) {
> > > - /* fw version response */
> > > - memcpy(kim_gdata->resp_buffer,
> > > - kim_gdata->rx_skb->data,
> > > - kim_gdata->rx_skb->len);
> > > - kim_gdata->rx_state = ST_W4_PACKET_TYPE;
> > > - kim_gdata->rx_skb = NULL;
> > > - kim_gdata->rx_count = 0;
> > > - } else if (unlikely(skb->data[5] != 0)) {
> > > - pr_err("no proper response during fw download");
> > > - pr_err("data6 %x", skb->data[5]);
> > > - kfree_skb(skb);
> > > - return; /* keep waiting for the proper response */
> > > - }
> > > - /* becos of all the script being downloaded */
> > > - complete_all(&kim_gdata->kim_rcvd);
> > > - kfree_skb(skb);
> > > -}
> > > -
> > > -/* check for data len received inside kim_int_recv
> > > - * most often hit the last case to update state to waiting for data
> > > - */
> > > -static inline int kim_check_data_len(struct kim_data_s *kim_gdata, int len)
> > > -{
> > > - register int room = skb_tailroom(kim_gdata->rx_skb);
> > > -
> > > - pr_debug("len %d room %d", len, room);
> > > -
> > > - if (!len) {
> > > - validate_firmware_response(kim_gdata);
> > > - } else if (len > room) {
> > > - /* Received packet's payload length is larger.
> > > - * We can't accommodate it in created skb.
> > > - */
> > > - pr_err("Data length is too large len %d room %d", len,
> > > - room);
> > > - kfree_skb(kim_gdata->rx_skb);
> > > - } else {
> > > - /* Packet header has non-zero payload length and
> > > - * we have enough space in created skb. Lets read
> > > - * payload data */
> > > - kim_gdata->rx_state = ST_W4_DATA;
> > > - kim_gdata->rx_count = len;
> > > - return len;
> > > - }
> > > -
> > > - /* Change ST LL state to continue to process next
> > > - * packet */
> > > - kim_gdata->rx_state = ST_W4_PACKET_TYPE;
> > > - kim_gdata->rx_skb = NULL;
> > > - kim_gdata->rx_count = 0;
> > > -
> > > - return 0;
> > > -}
> > > -
> > > -/**
> > > - * kim_int_recv - receive function called during firmware download
> > > - * firmware download responses on different UART drivers
> > > - * have been observed to come in bursts of different
> > > - * tty_receive and hence the logic
> > > - */
> > > -static void kim_int_recv(struct kim_data_s *kim_gdata,
> > > - const unsigned char *data, long count)
> > > -{
> > > - const unsigned char *ptr;
> > > - int len = 0;
> > > - unsigned char *plen;
> > > -
> > > - pr_debug("%s", __func__);
> > > - /* Decode received bytes here */
> > > - ptr = data;
> > > - if (unlikely(ptr == NULL)) {
> > > - pr_err(" received null from TTY ");
> > > - return;
> > > - }
> > > -
> > > - while (count) {
> > > - if (kim_gdata->rx_count) {
> > > - len = min_t(unsigned int, kim_gdata->rx_count, count);
> > > - skb_put_data(kim_gdata->rx_skb, ptr, len);
> > > - kim_gdata->rx_count -= len;
> > > - count -= len;
> > > - ptr += len;
> > > -
> > > - if (kim_gdata->rx_count)
> > > - continue;
> > > -
> > > - /* Check ST RX state machine , where are we? */
> > > - switch (kim_gdata->rx_state) {
> > > - /* Waiting for complete packet ? */
> > > - case ST_W4_DATA:
> > > - pr_debug("Complete pkt received");
> > > - validate_firmware_response(kim_gdata);
> > > - kim_gdata->rx_state = ST_W4_PACKET_TYPE;
> > > - kim_gdata->rx_skb = NULL;
> > > - continue;
> > > - /* Waiting for Bluetooth event header ? */
> > > - case ST_W4_HEADER:
> > > - plen =
> > > - (unsigned char *)&kim_gdata->rx_skb->data[1];
> > > - pr_debug("event hdr: plen 0x%02x\n", *plen);
> > > - kim_check_data_len(kim_gdata, *plen);
> > > - continue;
> > > - } /* end of switch */
> > > - } /* end of if rx_state */
> > > - switch (*ptr) {
> > > - /* Bluetooth event packet? */
> > > - case 0x04:
> > > - kim_gdata->rx_state = ST_W4_HEADER;
> > > - kim_gdata->rx_count = 2;
> > > - break;
> > > - default:
> > > - pr_info("unknown packet");
> > > - ptr++;
> > > - count--;
> > > - continue;
> > > - }
> > > - ptr++;
> > > - count--;
> > > - kim_gdata->rx_skb =
> > > - alloc_skb(1024+8, GFP_ATOMIC);
> > > - if (!kim_gdata->rx_skb) {
> > > - pr_err("can't allocate mem for new packet");
> > > - kim_gdata->rx_state = ST_W4_PACKET_TYPE;
> > > - kim_gdata->rx_count = 0;
> > > - return;
> > > - }
> > > - skb_reserve(kim_gdata->rx_skb, 8);
> > > - kim_gdata->rx_skb->cb[0] = 4;
> > > - kim_gdata->rx_skb->cb[1] = 0;
> > > -
> > > - }
> > > - return;
> > > -}
> > > -
> > > -static long read_local_version(struct kim_data_s *kim_gdata, char *bts_scr_name)
> > > -{
> > > - unsigned short version = 0, chip = 0, min_ver = 0, maj_ver = 0;
> > > - const char read_ver_cmd[] = { 0x01, 0x01, 0x10, 0x00 };
> > > - long timeout;
> > > -
> > > - pr_debug("%s", __func__);
> > > -
> > > - reinit_completion(&kim_gdata->kim_rcvd);
> > > - if (4 != st_int_write(kim_gdata->core_data, read_ver_cmd, 4)) {
> > > - pr_err("kim: couldn't write 4 bytes");
> > > - return -EIO;
> > > - }
> > > -
> > > - timeout = wait_for_completion_interruptible_timeout(
> > > - &kim_gdata->kim_rcvd, msecs_to_jiffies(CMD_RESP_TIME));
> > > - if (timeout <= 0) {
> > > - pr_err(" waiting for ver info- timed out or received signal");
> > > - return timeout ? -ERESTARTSYS : -ETIMEDOUT;
> > > - }
> > > - reinit_completion(&kim_gdata->kim_rcvd);
> > > - /* the positions 12 & 13 in the response buffer provide with the
> > > - * chip, major & minor numbers
> > > - */
> > > -
> > > - version =
> > > - MAKEWORD(kim_gdata->resp_buffer[12],
> > > - kim_gdata->resp_buffer[13]);
> > > - chip = (version & 0x7C00) >> 10;
> > > - min_ver = (version & 0x007F);
> > > - maj_ver = (version & 0x0380) >> 7;
> > > -
> > > - if (version & 0x8000)
> > > - maj_ver |= 0x0008;
> > > -
> > > - sprintf(bts_scr_name, "ti-connectivity/TIInit_%d.%d.%d.bts",
> > > - chip, maj_ver, min_ver);
> > > -
> > > - /* to be accessed later via sysfs entry */
> > > - kim_gdata->version.full = version;
> > > - kim_gdata->version.chip = chip;
> > > - kim_gdata->version.maj_ver = maj_ver;
> > > - kim_gdata->version.min_ver = min_ver;
> > > -
> > > - pr_info("%s", bts_scr_name);
> > > - return 0;
> > > -}
> > > -
> > > -static void skip_change_remote_baud(unsigned char **ptr, long *len)
> > > -{
> > > - unsigned char *nxt_action, *cur_action;
> > > - cur_action = *ptr;
> > > -
> > > - nxt_action = cur_action + sizeof(struct bts_action) +
> > > - ((struct bts_action *) cur_action)->size;
> > > -
> > > - if (((struct bts_action *) nxt_action)->type != ACTION_WAIT_EVENT) {
> > > - pr_err("invalid action after change remote baud command");
> > > - } else {
> > > - *ptr = *ptr + sizeof(struct bts_action) +
> > > - ((struct bts_action *)cur_action)->size;
> > > - *len = *len - (sizeof(struct bts_action) +
> > > - ((struct bts_action *)cur_action)->size);
> > > - /* warn user on not commenting these in firmware */
> > > - pr_warn("skipping the wait event of change remote baud");
> > > - }
> > > -}
> > > -
> > > -/**
> > > - * download_firmware -
> > > - * internal function which parses through the .bts firmware
> > > - * script file intreprets SEND, DELAY actions only as of now
> > > - */
> > > -static long download_firmware(struct kim_data_s *kim_gdata)
> > > -{
> > > - long err = 0;
> > > - long len = 0;
> > > - unsigned char *ptr = NULL;
> > > - unsigned char *action_ptr = NULL;
> > > - unsigned char bts_scr_name[40] = { 0 }; /* 40 char long bts scr name? */
> > > - int wr_room_space;
> > > - int cmd_size;
> > > - unsigned long timeout;
> > > -
> > > - err = read_local_version(kim_gdata, bts_scr_name);
> > > - if (err != 0) {
> > > - pr_err("kim: failed to read local ver");
> > > - return err;
> > > - }
> > > - err =
> > > - request_firmware(&kim_gdata->fw_entry, bts_scr_name,
> > > - &kim_gdata->kim_pdev->dev);
> > > - if (unlikely((err != 0) || (kim_gdata->fw_entry->data == NULL) ||
> > > - (kim_gdata->fw_entry->size == 0))) {
> > > - pr_err(" request_firmware failed(errno %ld) for %s", err,
> > > - bts_scr_name);
> > > - return -EINVAL;
> > > - }
> > > - ptr = (void *)kim_gdata->fw_entry->data;
> > > - len = kim_gdata->fw_entry->size;
> > > - /* bts_header to remove out magic number and
> > > - * version
> > > - */
> > > - ptr += sizeof(struct bts_header);
> > > - len -= sizeof(struct bts_header);
> > > -
> > > - while (len > 0 && ptr) {
> > > - pr_debug(" action size %d, type %d ",
> > > - ((struct bts_action *)ptr)->size,
> > > - ((struct bts_action *)ptr)->type);
> > > -
> > > - switch (((struct bts_action *)ptr)->type) {
> > > - case ACTION_SEND_COMMAND: /* action send */
> > > - pr_debug("S");
> > > - action_ptr = &(((struct bts_action *)ptr)->data[0]);
> > > - if (unlikely
> > > - (((struct hci_command *)action_ptr)->opcode ==
> > > - 0xFF36)) {
> > > - /* ignore remote change
> > > - * baud rate HCI VS command */
> > > - pr_warn("change remote baud"
> > > - " rate command in firmware");
> > > - skip_change_remote_baud(&ptr, &len);
> > > - break;
> > > - }
> > > - /*
> > > - * Make sure we have enough free space in uart
> > > - * tx buffer to write current firmware command
> > > - */
> > > - cmd_size = ((struct bts_action *)ptr)->size;
> > > - timeout = jiffies + msecs_to_jiffies(CMD_WR_TIME);
> > > - do {
> > > - wr_room_space =
> > > - st_get_uart_wr_room(kim_gdata->core_data);
> > > - if (wr_room_space < 0) {
> > > - pr_err("Unable to get free "
> > > - "space info from uart tx buffer");
> > > - release_firmware(kim_gdata->fw_entry);
> > > - return wr_room_space;
> > > - }
> > > - mdelay(1); /* wait 1ms before checking room */
> > > - } while ((wr_room_space < cmd_size) &&
> > > - time_before(jiffies, timeout));
> > > -
> > > - /* Timeout happened ? */
> > > - if (time_after_eq(jiffies, timeout)) {
> > > - pr_err("Timeout while waiting for free "
> > > - "free space in uart tx buffer");
> > > - release_firmware(kim_gdata->fw_entry);
> > > - return -ETIMEDOUT;
> > > - }
> > > - /* reinit completion before sending for the
> > > - * relevant wait
> > > - */
> > > - reinit_completion(&kim_gdata->kim_rcvd);
> > > -
> > > - /*
> > > - * Free space found in uart buffer, call st_int_write
> > > - * to send current firmware command to the uart tx
> > > - * buffer.
> > > - */
> > > - err = st_int_write(kim_gdata->core_data,
> > > - ((struct bts_action_send *)action_ptr)->data,
> > > - ((struct bts_action *)ptr)->size);
> > > - if (unlikely(err < 0)) {
> > > - release_firmware(kim_gdata->fw_entry);
> > > - return err;
> > > - }
> > > - /*
> > > - * Check number of bytes written to the uart tx buffer
> > > - * and requested command write size
> > > - */
> > > - if (err != cmd_size) {
> > > - pr_err("Number of bytes written to uart "
> > > - "tx buffer are not matching with "
> > > - "requested cmd write size");
> > > - release_firmware(kim_gdata->fw_entry);
> > > - return -EIO;
> > > - }
> > > - break;
> > > - case ACTION_WAIT_EVENT: /* wait */
> > > - pr_debug("W");
> > > - err = wait_for_completion_interruptible_timeout(
> > > - &kim_gdata->kim_rcvd,
> > > - msecs_to_jiffies(CMD_RESP_TIME));
> > > - if (err <= 0) {
> > > - pr_err("response timeout/signaled during fw download ");
> > > - /* timed out */
> > > - release_firmware(kim_gdata->fw_entry);
> > > - return err ? -ERESTARTSYS : -ETIMEDOUT;
> > > - }
> > > - reinit_completion(&kim_gdata->kim_rcvd);
> > > - break;
> > > - case ACTION_DELAY: /* sleep */
> > > - pr_info("sleep command in scr");
> > > - action_ptr = &(((struct bts_action *)ptr)->data[0]);
> > > - mdelay(((struct bts_action_delay *)action_ptr)->msec);
> > > - break;
> > > - }
> > > - len =
> > > - len - (sizeof(struct bts_action) +
> > > - ((struct bts_action *)ptr)->size);
> > > - ptr =
> > > - ptr + sizeof(struct bts_action) +
> > > - ((struct bts_action *)ptr)->size;
> > > - }
> > > - /* fw download complete */
> > > - release_firmware(kim_gdata->fw_entry);
> > > - return 0;
> > > -}
> > > -
> > > -/**********************************************************************/
> > > -/* functions called from ST core */
> > > -/* called from ST Core, when REG_IN_PROGRESS (registration in progress)
> > > - * can be because of
> > > - * 1. response to read local version
> > > - * 2. during send/recv's of firmware download
> > > - */
> > > -void st_kim_recv(void *disc_data, const unsigned char *data, long count)
> > > -{
> > > - struct st_data_s *st_gdata = (struct st_data_s *)disc_data;
> > > - struct kim_data_s *kim_gdata = st_gdata->kim_data;
> > > -
> > > - /* proceed to gather all data and distinguish read fw version response
> > > - * from other fw responses when data gathering is complete
> > > - */
> > > - kim_int_recv(kim_gdata, data, count);
> > > - return;
> > > -}
> > > -
> > > -/* to signal completion of line discipline installation
> > > - * called from ST Core, upon tty_open
> > > - */
> > > -void st_kim_complete(void *kim_data)
> > > -{
> > > - struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
> > > - complete(&kim_gdata->ldisc_installed);
> > > -}
> > > -
> > > -/**
> > > - * st_kim_start - called from ST Core upon 1st registration
> > > - * This involves toggling the chip enable gpio, reading
> > > - * the firmware version from chip, forming the fw file name
> > > - * based on the chip version, requesting the fw, parsing it
> > > - * and perform download(send/recv).
> > > - */
> > > -long st_kim_start(void *kim_data)
> > > -{
> > > - long err = 0;
> > > - long retry = POR_RETRY_COUNT;
> > > - struct ti_st_plat_data *pdata;
> > > - struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
> > > -
> > > - pr_info(" %s", __func__);
> > > - pdata = kim_gdata->kim_pdev->dev.platform_data;
> > > -
> > > - do {
> > > - /* platform specific enabling code here */
> > > - if (pdata->chip_enable)
> > > - pdata->chip_enable(kim_gdata);
> > > -
> > > - /* Configure BT nShutdown to HIGH state */
> > > - gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW);
> > > - mdelay(5); /* FIXME: a proper toggle */
> > > - gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_HIGH);
> > > - mdelay(100);
> > > - /* re-initialize the completion */
> > > - reinit_completion(&kim_gdata->ldisc_installed);
> > > - /* send notification to UIM */
> > > - kim_gdata->ldisc_install = 1;
> > > - pr_info("ldisc_install = 1");
> > > - sysfs_notify(&kim_gdata->kim_pdev->dev.kobj,
> > > - NULL, "install");
> > > - /* wait for ldisc to be installed */
> > > - err = wait_for_completion_interruptible_timeout(
> > > - &kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
> > > - if (!err) {
> > > - /* ldisc installation timeout,
> > > - * flush uart, power cycle BT_EN */
> > > - pr_err("ldisc installation timeout");
> > > - err = st_kim_stop(kim_gdata);
> > > - continue;
> > > - } else {
> > > - /* ldisc installed now */
> > > - pr_info("line discipline installed");
> > > - err = download_firmware(kim_gdata);
> > > - if (err != 0) {
> > > - /* ldisc installed but fw download failed,
> > > - * flush uart & power cycle BT_EN */
> > > - pr_err("download firmware failed");
> > > - err = st_kim_stop(kim_gdata);
> > > - continue;
> > > - } else { /* on success don't retry */
> > > - break;
> > > - }
> > > - }
> > > - } while (retry--);
> > > - return err;
> > > -}
> > > -
> > > -/**
> > > - * st_kim_stop - stop communication with chip.
> > > - * This can be called from ST Core/KIM, on the-
> > > - * (a) last un-register when chip need not be powered there-after,
> > > - * (b) upon failure to either install ldisc or download firmware.
> > > - * The function is responsible to (a) notify UIM about un-installation,
> > > - * (b) flush UART if the ldisc was installed.
> > > - * (c) reset BT_EN - pull down nshutdown at the end.
> > > - * (d) invoke platform's chip disabling routine.
> > > - */
> > > -long st_kim_stop(void *kim_data)
> > > -{
> > > - long err = 0;
> > > - struct kim_data_s *kim_gdata = (struct kim_data_s *)kim_data;
> > > - struct ti_st_plat_data *pdata =
> > > - kim_gdata->kim_pdev->dev.platform_data;
> > > - struct tty_struct *tty = kim_gdata->core_data->tty;
> > > -
> > > - reinit_completion(&kim_gdata->ldisc_installed);
> > > -
> > > - if (tty) { /* can be called before ldisc is installed */
> > > - /* Flush any pending characters in the driver and discipline. */
> > > - tty_ldisc_flush(tty);
> > > - tty_driver_flush_buffer(tty);
> > > - }
> > > -
> > > - /* send uninstall notification to UIM */
> > > - pr_info("ldisc_install = 0");
> > > - kim_gdata->ldisc_install = 0;
> > > - sysfs_notify(&kim_gdata->kim_pdev->dev.kobj, NULL, "install");
> > > -
> > > - /* wait for ldisc to be un-installed */
> > > - err = wait_for_completion_interruptible_timeout(
> > > - &kim_gdata->ldisc_installed, msecs_to_jiffies(LDISC_TIME));
> > > - if (!err) { /* timeout */
> > > - pr_err(" timed out waiting for ldisc to be un-installed");
> > > - err = -ETIMEDOUT;
> > > - }
> > > -
> > > - /* By default configure BT nShutdown to LOW state */
> > > - gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW);
> > > - mdelay(1);
> > > - gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_HIGH);
> > > - mdelay(1);
> > > - gpio_set_value_cansleep(kim_gdata->nshutdown, GPIO_LOW);
> > > -
> > > - /* platform specific disable */
> > > - if (pdata->chip_disable)
> > > - pdata->chip_disable(kim_gdata);
> > > - return err;
> > > -}
> > > -
> > > -/**********************************************************************/
> > > -/* functions called from subsystems */
> > > -/* called when debugfs entry is read from */
> > > -
> > > -static int show_version(struct seq_file *s, void *unused)
> > > -{
> > > - struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
> > > - seq_printf(s, "%04X %d.%d.%d\n", kim_gdata->version.full,
> > > - kim_gdata->version.chip, kim_gdata->version.maj_ver,
> > > - kim_gdata->version.min_ver);
> > > - return 0;
> > > -}
> > > -
> > > -static int show_list(struct seq_file *s, void *unused)
> > > -{
> > > - struct kim_data_s *kim_gdata = (struct kim_data_s *)s->private;
> > > - kim_st_list_protocols(kim_gdata->core_data, s);
> > > - return 0;
> > > -}
> > > -
> > > -static ssize_t show_install(struct device *dev,
> > > - struct device_attribute *attr, char *buf)
> > > -{
> > > - struct kim_data_s *kim_data = dev_get_drvdata(dev);
> > > - return sprintf(buf, "%d\n", kim_data->ldisc_install);
> > > -}
> > > -
> > > -#ifdef DEBUG
> > > -static ssize_t store_dev_name(struct device *dev,
> > > - struct device_attribute *attr, const char *buf, size_t count)
> > > -{
> > > - struct kim_data_s *kim_data = dev_get_drvdata(dev);
> > > - pr_debug("storing dev name >%s<", buf);
> > > - strncpy(kim_data->dev_name, buf, count);
> > > - pr_debug("stored dev name >%s<", kim_data->dev_name);
> > > - return count;
> > > -}
> > > -
> > > -static ssize_t store_baud_rate(struct device *dev,
> > > - struct device_attribute *attr, const char *buf, size_t count)
> > > -{
> > > - struct kim_data_s *kim_data = dev_get_drvdata(dev);
> > > - pr_debug("storing baud rate >%s<", buf);
> > > - sscanf(buf, "%ld", &kim_data->baud_rate);
> > > - pr_debug("stored baud rate >%ld<", kim_data->baud_rate);
> > > - return count;
> > > -}
> > > -#endif /* if DEBUG */
> > > -
> > > -static ssize_t show_dev_name(struct device *dev,
> > > - struct device_attribute *attr, char *buf)
> > > -{
> > > - struct kim_data_s *kim_data = dev_get_drvdata(dev);
> > > - return sprintf(buf, "%s\n", kim_data->dev_name);
> > > -}
> > > -
> > > -static ssize_t show_baud_rate(struct device *dev,
> > > - struct device_attribute *attr, char *buf)
> > > -{
> > > - struct kim_data_s *kim_data = dev_get_drvdata(dev);
> > > - return sprintf(buf, "%d\n", kim_data->baud_rate);
> > > -}
> > > -
> > > -static ssize_t show_flow_cntrl(struct device *dev,
> > > - struct device_attribute *attr, char *buf)
> > > -{
> > > - struct kim_data_s *kim_data = dev_get_drvdata(dev);
> > > - return sprintf(buf, "%d\n", kim_data->flow_cntrl);
> > > -}
> > > -
> > > -/* structures specific for sysfs entries */
> > > -static struct kobj_attribute ldisc_install =
> > > -__ATTR(install, 0444, (void *)show_install, NULL);
> > > -
> > > -static struct kobj_attribute uart_dev_name =
> > > -#ifdef DEBUG /* TODO: move this to debug-fs if possible */
> > > -__ATTR(dev_name, 0644, (void *)show_dev_name, (void *)store_dev_name);
> > > -#else
> > > -__ATTR(dev_name, 0444, (void *)show_dev_name, NULL);
> > > -#endif
> > > -
> > > -static struct kobj_attribute uart_baud_rate =
> > > -#ifdef DEBUG /* TODO: move to debugfs */
> > > -__ATTR(baud_rate, 0644, (void *)show_baud_rate, (void *)store_baud_rate);
> > > -#else
> > > -__ATTR(baud_rate, 0444, (void *)show_baud_rate, NULL);
> > > -#endif
> > > -
> > > -static struct kobj_attribute uart_flow_cntrl =
> > > -__ATTR(flow_cntrl, 0444, (void *)show_flow_cntrl, NULL);
> > > -
> > > -static struct attribute *uim_attrs[] = {
> > > - &ldisc_install.attr,
> > > - &uart_dev_name.attr,
> > > - &uart_baud_rate.attr,
> > > - &uart_flow_cntrl.attr,
> > > - NULL,
> > > -};
> > > -
> > > -static const struct attribute_group uim_attr_grp = {
> > > - .attrs = uim_attrs,
> > > -};
> > > -
> > > -/**
> > > - * st_kim_ref - reference the core's data
> > > - * This references the per-ST platform device in the arch/xx/
> > > - * board-xx.c file.
> > > - * This would enable multiple such platform devices to exist
> > > - * on a given platform
> > > - */
> > > -void st_kim_ref(struct st_data_s **core_data, int id)
> > > -{
> > > - struct platform_device *pdev;
> > > - struct kim_data_s *kim_gdata;
> > > - /* get kim_gdata reference from platform device */
> > > - pdev = st_get_plat_device(id);
> > > - if (!pdev)
> > > - goto err;
> > > - kim_gdata = platform_get_drvdata(pdev);
> > > - if (!kim_gdata)
> > > - goto err;
> > > -
> > > - *core_data = kim_gdata->core_data;
> > > - return;
> > > -err:
> > > - *core_data = NULL;
> > > -}
> > > -
> > > -static int kim_version_open(struct inode *i, struct file *f)
> > > -{
> > > - return single_open(f, show_version, i->i_private);
> > > -}
> > > -
> > > -static int kim_list_open(struct inode *i, struct file *f)
> > > -{
> > > - return single_open(f, show_list, i->i_private);
> > > -}
> > > -
> > > -static const struct file_operations version_debugfs_fops = {
> > > - /* version info */
> > > - .open = kim_version_open,
> > > - .read = seq_read,
> > > - .llseek = seq_lseek,
> > > - .release = single_release,
> > > -};
> > > -static const struct file_operations list_debugfs_fops = {
> > > - /* protocols info */
> > > - .open = kim_list_open,
> > > - .read = seq_read,
> > > - .llseek = seq_lseek,
> > > - .release = single_release,
> > > -};
> > > -
> > > -/**********************************************************************/
> > > -/* functions called from platform device driver subsystem
> > > - * need to have a relevant platform device entry in the platform's
> > > - * board-*.c file
> > > - */
> > > -
> > > -static struct dentry *kim_debugfs_dir;
> > > -static int kim_probe(struct platform_device *pdev)
> > > -{
> > > - struct kim_data_s *kim_gdata;
> > > - struct ti_st_plat_data *pdata = pdev->dev.platform_data;
> > > - int err;
> > > -
> > > - if ((pdev->id != -1) && (pdev->id < MAX_ST_DEVICES)) {
> > > - /* multiple devices could exist */
> > > - st_kim_devices[pdev->id] = pdev;
> > > - } else {
> > > - /* platform's sure about existence of 1 device */
> > > - st_kim_devices[0] = pdev;
> > > - }
> > > -
> > > - kim_gdata = kzalloc(sizeof(struct kim_data_s), GFP_KERNEL);
> > > - if (!kim_gdata) {
> > > - pr_err("no mem to allocate");
> > > - return -ENOMEM;
> > > - }
> > > - platform_set_drvdata(pdev, kim_gdata);
> > > -
> > > - err = st_core_init(&kim_gdata->core_data);
> > > - if (err != 0) {
> > > - pr_err(" ST core init failed");
> > > - err = -EIO;
> > > - goto err_core_init;
> > > - }
> > > - /* refer to itself */
> > > - kim_gdata->core_data->kim_data = kim_gdata;
> > > -
> > > - /* Claim the chip enable nShutdown gpio from the system */
> > > - kim_gdata->nshutdown = pdata->nshutdown_gpio;
> > > - err = gpio_request(kim_gdata->nshutdown, "kim");
> > > - if (unlikely(err)) {
> > > - pr_err(" gpio %d request failed ", kim_gdata->nshutdown);
> > > - goto err_sysfs_group;
> > > - }
> > > -
> > > - /* Configure nShutdown GPIO as output=0 */
> > > - err = gpio_direction_output(kim_gdata->nshutdown, 0);
> > > - if (unlikely(err)) {
> > > - pr_err(" unable to configure gpio %d", kim_gdata->nshutdown);
> > > - goto err_sysfs_group;
> > > - }
> > > - /* get reference of pdev for request_firmware
> > > - */
> > > - kim_gdata->kim_pdev = pdev;
> > > - init_completion(&kim_gdata->kim_rcvd);
> > > - init_completion(&kim_gdata->ldisc_installed);
> > > -
> > > - err = sysfs_create_group(&pdev->dev.kobj, &uim_attr_grp);
> > > - if (err) {
> > > - pr_err("failed to create sysfs entries");
> > > - goto err_sysfs_group;
> > > - }
> > > -
> > > - /* copying platform data */
> > > - strncpy(kim_gdata->dev_name, pdata->dev_name, UART_DEV_NAME_LEN);
> > > - kim_gdata->flow_cntrl = pdata->flow_cntrl;
> > > - kim_gdata->baud_rate = pdata->baud_rate;
> > > - pr_info("sysfs entries created\n");
> > > -
> > > - kim_debugfs_dir = debugfs_create_dir("ti-st", NULL);
> > > - if (!kim_debugfs_dir) {
> > > - pr_err(" debugfs entries creation failed ");
> > > - return 0;
> > > - }
> > > -
> > > - debugfs_create_file("version", S_IRUGO, kim_debugfs_dir,
> > > - kim_gdata, &version_debugfs_fops);
> > > - debugfs_create_file("protocols", S_IRUGO, kim_debugfs_dir,
> > > - kim_gdata, &list_debugfs_fops);
> > > - return 0;
> > > -
> > > -err_sysfs_group:
> > > - st_core_exit(kim_gdata->core_data);
> > > -
> > > -err_core_init:
> > > - kfree(kim_gdata);
> > > -
> > > - return err;
> > > -}
> > > -
> > > -static int kim_remove(struct platform_device *pdev)
> > > -{
> > > - /* free the GPIOs requested */
> > > - struct ti_st_plat_data *pdata = pdev->dev.platform_data;
> > > - struct kim_data_s *kim_gdata;
> > > -
> > > - kim_gdata = platform_get_drvdata(pdev);
> > > -
> > > - /* Free the Bluetooth/FM/GPIO
> > > - * nShutdown gpio from the system
> > > - */
> > > - gpio_free(pdata->nshutdown_gpio);
> > > - pr_info("nshutdown GPIO Freed");
> > > -
> > > - debugfs_remove_recursive(kim_debugfs_dir);
> > > - sysfs_remove_group(&pdev->dev.kobj, &uim_attr_grp);
> > > - pr_info("sysfs entries removed");
> > > -
> > > - kim_gdata->kim_pdev = NULL;
> > > - st_core_exit(kim_gdata->core_data);
> > > -
> > > - kfree(kim_gdata);
> > > - kim_gdata = NULL;
> > > - return 0;
> > > -}
> > > -
> > > -static int kim_suspend(struct platform_device *pdev, pm_message_t state)
> > > -{
> > > - struct ti_st_plat_data *pdata = pdev->dev.platform_data;
> > > -
> > > - if (pdata->suspend)
> > > - return pdata->suspend(pdev, state);
> > > -
> > > - return 0;
> > > -}
> > > -
> > > -static int kim_resume(struct platform_device *pdev)
> > > -{
> > > - struct ti_st_plat_data *pdata = pdev->dev.platform_data;
> > > -
> > > - if (pdata->resume)
> > > - return pdata->resume(pdev);
> > > -
> > > - return 0;
> > > -}
> > > -
> > > -/**********************************************************************/
> > > -/* entry point for ST KIM module, called in from ST Core */
> > > -static struct platform_driver kim_platform_driver = {
> > > - .probe = kim_probe,
> > > - .remove = kim_remove,
> > > - .suspend = kim_suspend,
> > > - .resume = kim_resume,
> > > - .driver = {
> > > - .name = "kim",
> > > - },
> > > -};
> > > -
> > > -module_platform_driver(kim_platform_driver);
> > > -
> > > -MODULE_AUTHOR("Pavan Savoy <pavan_savoy@...com>");
> > > -MODULE_DESCRIPTION("Shared Transport Driver for TI BT/FM/GPS combo chips ");
> > > -MODULE_LICENSE("GPL");
> > > diff --git a/drivers/misc/ti-st/st_ll.c b/drivers/misc/ti-st/st_ll.c
> > > deleted file mode 100644
> > > index 93b4d67cc4a3..000000000000
> > > --- a/drivers/misc/ti-st/st_ll.c
> > > +++ /dev/null
> > > @@ -1,169 +0,0 @@
> > > -/*
> > > - * Shared Transport driver
> > > - * HCI-LL module responsible for TI proprietary HCI_LL protocol
> > > - * Copyright (C) 2009-2010 Texas Instruments
> > > - * Author: Pavan Savoy <pavan_savoy@...com>
> > > - *
> > > - * This program is free software; you can redistribute it and/or modify
> > > - * it under the terms of the GNU General Public License version 2 as
> > > - * published by the Free Software Foundation.
> > > - *
> > > - * This program is distributed in the hope that it will be useful,
> > > - * but WITHOUT ANY WARRANTY; without even the implied warranty of
> > > - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
> > > - * GNU General Public License for more details.
> > > - *
> > > - * You should have received a copy of the GNU General Public License
> > > - * along with this program; if not, write to the Free Software
> > > - * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
> > > - *
> > > - */
> > > -
> > > -#define pr_fmt(fmt) "(stll) :" fmt
> > > -#include <linux/skbuff.h>
> > > -#include <linux/module.h>
> > > -#include <linux/platform_device.h>
> > > -#include <linux/ti_wilink_st.h>
> > > -
> > > -/**********************************************************************/
> > > -/* internal functions */
> > > -static void send_ll_cmd(struct st_data_s *st_data,
> > > - unsigned char cmd)
> > > -{
> > > -
> > > - pr_debug("%s: writing %x", __func__, cmd);
> > > - st_int_write(st_data, &cmd, 1);
> > > - return;
> > > -}
> > > -
> > > -static void ll_device_want_to_sleep(struct st_data_s *st_data)
> > > -{
> > > - struct kim_data_s *kim_data;
> > > - struct ti_st_plat_data *pdata;
> > > -
> > > - pr_debug("%s", __func__);
> > > - /* sanity check */
> > > - if (st_data->ll_state != ST_LL_AWAKE)
> > > - pr_err("ERR hcill: ST_LL_GO_TO_SLEEP_IND"
> > > - "in state %ld", st_data->ll_state);
> > > -
> > > - send_ll_cmd(st_data, LL_SLEEP_ACK);
> > > - /* update state */
> > > - st_data->ll_state = ST_LL_ASLEEP;
> > > -
> > > - /* communicate to platform about chip asleep */
> > > - kim_data = st_data->kim_data;
> > > - pdata = kim_data->kim_pdev->dev.platform_data;
> > > - if (pdata->chip_asleep)
> > > - pdata->chip_asleep(NULL);
> > > -}
> > > -
> > > -static void ll_device_want_to_wakeup(struct st_data_s *st_data)
> > > -{
> > > - struct kim_data_s *kim_data;
> > > - struct ti_st_plat_data *pdata;
> > > -
> > > - /* diff actions in diff states */
> > > - switch (st_data->ll_state) {
> > > - case ST_LL_ASLEEP:
> > > - send_ll_cmd(st_data, LL_WAKE_UP_ACK); /* send wake_ack */
> > > - break;
> > > - case ST_LL_ASLEEP_TO_AWAKE:
> > > - /* duplicate wake_ind */
> > > - pr_err("duplicate wake_ind while waiting for Wake ack");
> > > - break;
> > > - case ST_LL_AWAKE:
> > > - /* duplicate wake_ind */
> > > - pr_err("duplicate wake_ind already AWAKE");
> > > - break;
> > > - case ST_LL_AWAKE_TO_ASLEEP:
> > > - /* duplicate wake_ind */
> > > - pr_err("duplicate wake_ind");
> > > - break;
> > > - }
> > > - /* update state */
> > > - st_data->ll_state = ST_LL_AWAKE;
> > > -
> > > - /* communicate to platform about chip wakeup */
> > > - kim_data = st_data->kim_data;
> > > - pdata = kim_data->kim_pdev->dev.platform_data;
> > > - if (pdata->chip_awake)
> > > - pdata->chip_awake(NULL);
> > > -}
> > > -
> > > -/**********************************************************************/
> > > -/* functions invoked by ST Core */
> > > -
> > > -/* called when ST Core wants to
> > > - * enable ST LL */
> > > -void st_ll_enable(struct st_data_s *ll)
> > > -{
> > > - ll->ll_state = ST_LL_AWAKE;
> > > -}
> > > -
> > > -/* called when ST Core /local module wants to
> > > - * disable ST LL */
> > > -void st_ll_disable(struct st_data_s *ll)
> > > -{
> > > - ll->ll_state = ST_LL_INVALID;
> > > -}
> > > -
> > > -/* called when ST Core wants to update the state */
> > > -void st_ll_wakeup(struct st_data_s *ll)
> > > -{
> > > - if (likely(ll->ll_state != ST_LL_AWAKE)) {
> > > - send_ll_cmd(ll, LL_WAKE_UP_IND); /* WAKE_IND */
> > > - ll->ll_state = ST_LL_ASLEEP_TO_AWAKE;
> > > - } else {
> > > - /* don't send the duplicate wake_indication */
> > > - pr_err(" Chip already AWAKE ");
> > > - }
> > > -}
> > > -
> > > -/* called when ST Core wants the state */
> > > -unsigned long st_ll_getstate(struct st_data_s *ll)
> > > -{
> > > - pr_debug(" returning state %ld", ll->ll_state);
> > > - return ll->ll_state;
> > > -}
> > > -
> > > -/* called from ST Core, when a PM related packet arrives */
> > > -unsigned long st_ll_sleep_state(struct st_data_s *st_data,
> > > - unsigned char cmd)
> > > -{
> > > - switch (cmd) {
> > > - case LL_SLEEP_IND: /* sleep ind */
> > > - pr_debug("sleep indication recvd");
> > > - ll_device_want_to_sleep(st_data);
> > > - break;
> > > - case LL_SLEEP_ACK: /* sleep ack */
> > > - pr_err("sleep ack rcvd: host shouldn't");
> > > - break;
> > > - case LL_WAKE_UP_IND: /* wake ind */
> > > - pr_debug("wake indication recvd");
> > > - ll_device_want_to_wakeup(st_data);
> > > - break;
> > > - case LL_WAKE_UP_ACK: /* wake ack */
> > > - pr_debug("wake ack rcvd");
> > > - st_data->ll_state = ST_LL_AWAKE;
> > > - break;
> > > - default:
> > > - pr_err(" unknown input/state ");
> > > - return -EINVAL;
> > > - }
> > > - return 0;
> > > -}
> > > -
> > > -/* Called from ST CORE to initialize ST LL */
> > > -long st_ll_init(struct st_data_s *ll)
> > > -{
> > > - /* set state to invalid */
> > > - ll->ll_state = ST_LL_INVALID;
> > > - return 0;
> > > -}
> > > -
> > > -/* Called from ST CORE to de-initialize ST LL */
> > > -long st_ll_deinit(struct st_data_s *ll)
> > > -{
> > > - return 0;
> > > -}
> > > diff --git a/include/linux/ti_wilink_st.h b/include/linux/ti_wilink_st.h
> > > index a9de5654b0cd..76a372bdf540 100644
> > > --- a/include/linux/ti_wilink_st.h
> > > +++ b/include/linux/ti_wilink_st.h
> > > @@ -27,268 +27,9 @@
> > >
> > > #include <linux/skbuff.h>
> > >
> > > -/**
> > > - * enum proto-type - The protocol on WiLink chips which share a
> > > - * common physical interface like UART.
> > > - */
> > > -enum proto_type {
> > > - ST_BT,
> > > - ST_FM,
> > > - ST_GPS,
> > > - ST_MAX_CHANNELS = 16,
> > > -};
> > > -
> > > -/**
> > > - * struct st_proto_s - Per Protocol structure from BT/FM/GPS to ST
> > > - * @type: type of the protocol being registered among the
> > > - * available proto_type(BT, FM, GPS the protocol which share TTY).
> > > - * @recv: the receiver callback pointing to a function in the
> > > - * protocol drivers called by the ST driver upon receiving
> > > - * relevant data.
> > > - * @match_packet: reserved for future use, to make ST more generic
> > > - * @reg_complete_cb: callback handler pointing to a function in protocol
> > > - * handler called by ST when the pending registrations are complete.
> > > - * The registrations are marked pending, in situations when fw
> > > - * download is in progress.
> > > - * @write: pointer to function in ST provided to protocol drivers from ST,
> > > - * to be made use when protocol drivers have data to send to TTY.
> > > - * @priv_data: privdate data holder for the protocol drivers, sent
> > > - * from the protocol drivers during registration, and sent back on
> > > - * reg_complete_cb and recv.
> > > - * @chnl_id: channel id the protocol driver is interested in, the channel
> > > - * id is nothing but the 1st byte of the packet in UART frame.
> > > - * @max_frame_size: size of the largest frame the protocol can receive.
> > > - * @hdr_len: length of the header structure of the protocol.
> > > - * @offset_len_in_hdr: this provides the offset of the length field in the
> > > - * header structure of the protocol header, to assist ST to know
> > > - * how much to receive, if the data is split across UART frames.
> > > - * @len_size: whether the length field inside the header is 2 bytes
> > > - * or 1 byte.
> > > - * @reserve: the number of bytes ST needs to reserve in the skb being
> > > - * prepared for the protocol driver.
> > > - */
> > > -struct st_proto_s {
> > > - enum proto_type type;
> > > - long (*recv) (void *, struct sk_buff *);
> > > - unsigned char (*match_packet) (const unsigned char *data);
> > > - void (*reg_complete_cb) (void *, int data);
> > > - long (*write) (struct sk_buff *skb);
> > > - void *priv_data;
> > > -
> > > - unsigned char chnl_id;
> > > - unsigned short max_frame_size;
> > > - unsigned char hdr_len;
> > > - unsigned char offset_len_in_hdr;
> > > - unsigned char len_size;
> > > - unsigned char reserve;
> > > -};
> > > -
> > > -extern long st_register(struct st_proto_s *);
> > > -extern long st_unregister(struct st_proto_s *);
> > > -
> > > void hci_ti_set_fm_handler(struct device *dev, void (*recv_handler) (void *, struct sk_buff *), void *drvdata);
> > > int hci_ti_fm_send(struct device *dev, struct sk_buff *skb);
> > >
> > > -/*
> > > - * header information used by st_core.c
> > > - */
> > > -
> > > -/* states of protocol list */
> > > -#define ST_NOTEMPTY 1
> > > -#define ST_EMPTY 0
> > > -
> > > -/*
> > > - * possible st_states
> > > - */
> > > -#define ST_INITIALIZING 1
> > > -#define ST_REG_IN_PROGRESS 2
> > > -#define ST_REG_PENDING 3
> > > -#define ST_WAITING_FOR_RESP 4
> > > -
> > > -/**
> > > - * struct st_data_s - ST core internal structure
> > > - * @st_state: different states of ST like initializing, registration
> > > - * in progress, this is mainly used to return relevant err codes
> > > - * when protocol drivers are registering. It is also used to track
> > > - * the recv function, as in during fw download only HCI events
> > > - * can occur , where as during other times other events CH8, CH9
> > > - * can occur.
> > > - * @tty: tty provided by the TTY core for line disciplines.
> > > - * @tx_skb: If for some reason the tty's write returns lesser bytes written
> > > - * then to maintain the rest of data to be written on next instance.
> > > - * This needs to be protected, hence the lock inside wakeup func.
> > > - * @tx_state: if the data is being written onto the TTY and protocol driver
> > > - * wants to send more, queue up data and mark that there is
> > > - * more data to send.
> > > - * @list: the list of protocols registered, only MAX can exist, one protocol
> > > - * can register only once.
> > > - * @rx_state: states to be maintained inside st's tty receive
> > > - * @rx_count: count to be maintained inside st's tty receieve
> > > - * @rx_skb: the skb where all data for a protocol gets accumulated,
> > > - * since tty might not call receive when a complete event packet
> > > - * is received, the states, count and the skb needs to be maintained.
> > > - * @rx_chnl: the channel ID for which the data is getting accumalated for.
> > > - * @txq: the list of skbs which needs to be sent onto the TTY.
> > > - * @tx_waitq: if the chip is not in AWAKE state, the skbs needs to be queued
> > > - * up in here, PM(WAKEUP_IND) data needs to be sent and then the skbs
> > > - * from waitq can be moved onto the txq.
> > > - * Needs locking too.
> > > - * @lock: the lock to protect skbs, queues, and ST states.
> > > - * @protos_registered: count of the protocols registered, also when 0 the
> > > - * chip enable gpio can be toggled, and when it changes to 1 the fw
> > > - * needs to be downloaded to initialize chip side ST.
> > > - * @ll_state: the various PM states the chip can be, the states are notified
> > > - * to us, when the chip sends relevant PM packets(SLEEP_IND, WAKE_IND).
> > > - * @kim_data: reference to the parent encapsulating structure.
> > > - *
> > > - */
> > > -struct st_data_s {
> > > - unsigned long st_state;
> > > - struct sk_buff *tx_skb;
> > > -#define ST_TX_SENDING 1
> > > -#define ST_TX_WAKEUP 2
> > > - unsigned long tx_state;
> > > - struct st_proto_s *list[ST_MAX_CHANNELS];
> > > - bool is_registered[ST_MAX_CHANNELS];
> > > - unsigned long rx_state;
> > > - unsigned long rx_count;
> > > - struct sk_buff *rx_skb;
> > > - unsigned char rx_chnl;
> > > - struct sk_buff_head txq, tx_waitq;
> > > - spinlock_t lock;
> > > - unsigned char protos_registered;
> > > - unsigned long ll_state;
> > > - void *kim_data;
> > > - struct tty_struct *tty;
> > > - struct work_struct work_write_wakeup;
> > > -};
> > > -
> > > -/*
> > > - * wrapper around tty->ops->write_room to check
> > > - * availability during firmware download
> > > - */
> > > -int st_get_uart_wr_room(struct st_data_s *st_gdata);
> > > -/**
> > > - * st_int_write -
> > > - * point this to tty->driver->write or tty->ops->write
> > > - * depending upon the kernel version
> > > - */
> > > -int st_int_write(struct st_data_s*, const unsigned char*, int);
> > > -
> > > -/**
> > > - * st_write -
> > > - * internal write function, passed onto protocol drivers
> > > - * via the write function ptr of protocol struct
> > > - */
> > > -long st_write(struct sk_buff *);
> > > -
> > > -/* function to be called from ST-LL */
> > > -void st_ll_send_frame(enum proto_type, struct sk_buff *);
> > > -
> > > -/* internal wake up function */
> > > -void st_tx_wakeup(struct st_data_s *st_data);
> > > -
> > > -/* init, exit entry funcs called from KIM */
> > > -int st_core_init(struct st_data_s **);
> > > -void st_core_exit(struct st_data_s *);
> > > -
> > > -/* ask for reference from KIM */
> > > -void st_kim_ref(struct st_data_s **, int);
> > > -
> > > -#define GPS_STUB_TEST
> > > -#ifdef GPS_STUB_TEST
> > > -int gps_chrdrv_stub_write(const unsigned char*, int);
> > > -void gps_chrdrv_stub_init(void);
> > > -#endif
> > > -
> > > -/*
> > > - * header information used by st_kim.c
> > > - */
> > > -
> > > -/* time in msec to wait for
> > > - * line discipline to be installed
> > > - */
> > > -#define LDISC_TIME 1000
> > > -#define CMD_RESP_TIME 800
> > > -#define CMD_WR_TIME 5000
> > > -#define MAKEWORD(a, b) ((unsigned short)(((unsigned char)(a)) \
> > > - | ((unsigned short)((unsigned char)(b))) << 8))
> > > -
> > > -#define GPIO_HIGH 1
> > > -#define GPIO_LOW 0
> > > -
> > > -/* the Power-On-Reset logic, requires to attempt
> > > - * to download firmware onto chip more than once
> > > - * since the self-test for chip takes a while
> > > - */
> > > -#define POR_RETRY_COUNT 5
> > > -
> > > -/**
> > > - * struct chip_version - save the chip version
> > > - */
> > > -struct chip_version {
> > > - unsigned short full;
> > > - unsigned short chip;
> > > - unsigned short min_ver;
> > > - unsigned short maj_ver;
> > > -};
> > > -
> > > -#define UART_DEV_NAME_LEN 32
> > > -/**
> > > - * struct kim_data_s - the KIM internal data, embedded as the
> > > - * platform's drv data. One for each ST device in the system.
> > > - * @uim_pid: KIM needs to communicate with UIM to request to install
> > > - * the ldisc by opening UART when protocol drivers register.
> > > - * @kim_pdev: the platform device added in one of the board-XX.c file
> > > - * in arch/XX/ directory, 1 for each ST device.
> > > - * @kim_rcvd: completion handler to notify when data was received,
> > > - * mainly used during fw download, which involves multiple send/wait
> > > - * for each of the HCI-VS commands.
> > > - * @ldisc_installed: completion handler to notify that the UIM accepted
> > > - * the request to install ldisc, notify from tty_open which suggests
> > > - * the ldisc was properly installed.
> > > - * @resp_buffer: data buffer for the .bts fw file name.
> > > - * @fw_entry: firmware class struct to request/release the fw.
> > > - * @rx_state: the rx state for kim's receive func during fw download.
> > > - * @rx_count: the rx count for the kim's receive func during fw download.
> > > - * @rx_skb: all of fw data might not come at once, and hence data storage for
> > > - * whole of the fw response, only HCI_EVENTs and hence diff from ST's
> > > - * response.
> > > - * @core_data: ST core's data, which mainly is the tty's disc_data
> > > - * @version: chip version available via a sysfs entry.
> > > - *
> > > - */
> > > -struct kim_data_s {
> > > - long uim_pid;
> > > - struct platform_device *kim_pdev;
> > > - struct completion kim_rcvd, ldisc_installed;
> > > - char resp_buffer[30];
> > > - const struct firmware *fw_entry;
> > > - unsigned nshutdown;
> > > - unsigned long rx_state;
> > > - unsigned long rx_count;
> > > - struct sk_buff *rx_skb;
> > > - struct st_data_s *core_data;
> > > - struct chip_version version;
> > > - unsigned char ldisc_install;
> > > - unsigned char dev_name[UART_DEV_NAME_LEN + 1];
> > > - unsigned flow_cntrl;
> > > - unsigned baud_rate;
> > > -};
> > > -
> > > -/**
> > > - * functions called when 1 of the protocol drivers gets
> > > - * registered, these need to communicate with UIM to request
> > > - * ldisc installed, read chip_version, download relevant fw
> > > - */
> > > -long st_kim_start(void *);
> > > -long st_kim_stop(void *);
> > > -
> > > -void st_kim_complete(void *);
> > > -void kim_st_list_protocols(struct st_data_s *, void *);
> > > -void st_kim_recv(void *, const unsigned char *, long);
> > > -
> > > -
> > > /*
> > > * BTS headers
> > > */
> > > @@ -355,47 +96,6 @@ struct hci_command {
> > > u32 speed;
> > > } __attribute__ ((packed));
> > >
> > > -/*
> > > - * header information used by st_ll.c
> > > - */
> > > -
> > > -/* ST LL receiver states */
> > > -#define ST_W4_PACKET_TYPE 0
> > > -#define ST_W4_HEADER 1
> > > -#define ST_W4_DATA 2
> > > -
> > > -/* ST LL state machines */
> > > -#define ST_LL_ASLEEP 0
> > > -#define ST_LL_ASLEEP_TO_AWAKE 1
> > > -#define ST_LL_AWAKE 2
> > > -#define ST_LL_AWAKE_TO_ASLEEP 3
> > > -#define ST_LL_INVALID 4
> > > -
> > > -/* different PM notifications coming from chip */
> > > -#define LL_SLEEP_IND 0x30
> > > -#define LL_SLEEP_ACK 0x31
> > > -#define LL_WAKE_UP_IND 0x32
> > > -#define LL_WAKE_UP_ACK 0x33
> > > -
> > > -/* initialize and de-init ST LL */
> > > -long st_ll_init(struct st_data_s *);
> > > -long st_ll_deinit(struct st_data_s *);
> > > -
> > > -/**
> > > - * enable/disable ST LL along with KIM start/stop
> > > - * called by ST Core
> > > - */
> > > -void st_ll_enable(struct st_data_s *);
> > > -void st_ll_disable(struct st_data_s *);
> > > -
> > > -/**
> > > - * various funcs used by ST core to set/get the various PM states
> > > - * of the chip.
> > > - */
> > > -unsigned long st_ll_getstate(struct st_data_s *);
> > > -unsigned long st_ll_sleep_state(struct st_data_s *, unsigned char);
> > > -void st_ll_wakeup(struct st_data_s *);
> > > -
> > > /*
> > > * header information used by st_core.c for FM and GPS
> > > * packet parsing, the bluetooth headers are already available
> > > @@ -416,39 +116,4 @@ struct gps_event_hdr {
> > > u16 plen;
> > > } __attribute__ ((packed));
> > >
> > > -/**
> > > - * struct ti_st_plat_data - platform data shared between ST driver and
> > > - * platform specific board file which adds the ST device.
> > > - * @nshutdown_gpio: Host's GPIO line to which chip's BT_EN is connected.
> > > - * @dev_name: The UART/TTY name to which chip is interfaced. (eg: /dev/ttyS1)
> > > - * @flow_cntrl: Should always be 1, since UART's CTS/RTS is used for PM
> > > - * purposes.
> > > - * @baud_rate: The baud rate supported by the Host UART controller, this will
> > > - * be shared across with the chip via a HCI VS command from User-Space Init
> > > - * Mgr application.
> > > - * @suspend:
> > > - * @resume: legacy PM routines hooked to platform specific board file, so as
> > > - * to take chip-host interface specific action.
> > > - * @chip_enable:
> > > - * @chip_disable: Platform/Interface specific mux mode setting, GPIO
> > > - * configuring, Host side PM disabling etc.. can be done here.
> > > - * @chip_asleep:
> > > - * @chip_awake: Chip specific deep sleep states is communicated to Host
> > > - * specific board-xx.c to take actions such as cut UART clocks when chip
> > > - * asleep or run host faster when chip awake etc..
> > > - *
> > > - */
> > > -struct ti_st_plat_data {
> > > - u32 nshutdown_gpio;
> > > - unsigned char dev_name[UART_DEV_NAME_LEN]; /* uart name */
> > > - u32 flow_cntrl; /* flow control flag */
> > > - u32 baud_rate;
> > > - int (*suspend)(struct platform_device *, pm_message_t);
> > > - int (*resume)(struct platform_device *);
> > > - int (*chip_enable) (struct kim_data_s *);
> > > - int (*chip_disable) (struct kim_data_s *);
> > > - int (*chip_asleep) (struct kim_data_s *);
> > > - int (*chip_awake) (struct kim_data_s *);
> > > -};
> > > -
> > > #endif /* TI_WILINK_ST_H */
> >
> > > --
> > > 2.19.2
> > >
Powered by blists - more mailing lists