| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Date: Wed, 16 Jan 2019 13:31:01 -0800
From: Dan Williams <dan.j.williams@...el.com>
To: Dave Hansen <dave.hansen@...ux.intel.com>
Cc: Dave Hansen <dave@...1.net>, Dave Jiang <dave.jiang@...el.com>,
Ross Zwisler <zwisler@...nel.org>,
Vishal L Verma <vishal.l.verma@...el.com>,
Tom Lendacky <thomas.lendacky@....com>,
Andrew Morton <akpm@...ux-foundation.org>,
Michal Hocko <mhocko@...e.com>,
linux-nvdimm <linux-nvdimm@...ts.01.org>,
Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
Linux MM <linux-mm@...ck.org>,
"Huang, Ying" <ying.huang@...el.com>,
Fengguang Wu <fengguang.wu@...el.com>,
Borislav Petkov <bp@...e.de>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Yaowei Bai <baiyaowei@...s.chinamobile.com>,
Takashi Iwai <tiwai@...e.de>
Subject: Re: [PATCH 4/4] dax: "Hotplug" persistent memory for use like normal RAM
On Wed, Jan 16, 2019 at 10:25 AM Dave Hansen
<dave.hansen@...ux.intel.com> wrote:
>
>
> From: Dave Hansen <dave.hansen@...ux.intel.com>
>
> Currently, a persistent memory region is "owned" by a device driver,
> either the "Direct DAX" or "Filesystem DAX" drivers. These drivers
> allow applications to explicitly use persistent memory, generally
> by being modified to use special, new libraries.
>
> However, this limits persistent memory use to applications which
> *have* been modified. To make it more broadly usable, this driver
> "hotplugs" memory into the kernel, to be managed ad used just like
> normal RAM would be.
>
> To make this work, management software must remove the device from
> being controlled by the "Device DAX" infrastructure:
>
> echo -n dax0.0 > /sys/bus/dax/drivers/device_dax/remove_id
> echo -n dax0.0 > /sys/bus/dax/drivers/device_dax/unbind
>
> and then bind it to this new driver:
>
> echo -n dax0.0 > /sys/bus/dax/drivers/kmem/new_id
> echo -n dax0.0 > /sys/bus/dax/drivers/kmem/bind
>
> After this, there will be a number of new memory sections visible
> in sysfs that can be onlined, or that may get onlined by existing
> udev-initiated memory hotplug rules.
>
> Note: this inherits any existing NUMA information for the newly-
> added memory from the persistent memory device that came from the
> firmware. On Intel platforms, the firmware has guarantees that
> require each socket's persistent memory to be in a separate
> memory-only NUMA node. That means that this patch is not expected
> to create NUMA nodes, but will simply hotplug memory into existing
> nodes.
>
> There is currently some metadata at the beginning of pmem regions.
> The section-size memory hotplug restrictions, plus this small
> reserved area can cause the "loss" of a section or two of capacity.
> This should be fixable in follow-on patches. But, as a first step,
> losing 256MB of memory (worst case) out of hundreds of gigabytes
> is a good tradeoff vs. the required code to fix this up precisely.
>
> Signed-off-by: Dave Hansen <dave.hansen@...ux.intel.com>
> Cc: Dan Williams <dan.j.williams@...el.com>
> Cc: Dave Jiang <dave.jiang@...el.com>
> Cc: Ross Zwisler <zwisler@...nel.org>
> Cc: Vishal Verma <vishal.l.verma@...el.com>
> Cc: Tom Lendacky <thomas.lendacky@....com>
> Cc: Andrew Morton <akpm@...ux-foundation.org>
> Cc: Michal Hocko <mhocko@...e.com>
> Cc: linux-nvdimm@...ts.01.org
> Cc: linux-kernel@...r.kernel.org
> Cc: linux-mm@...ck.org
> Cc: Huang Ying <ying.huang@...el.com>
> Cc: Fengguang Wu <fengguang.wu@...el.com>
> Cc: Borislav Petkov <bp@...e.de>
> Cc: Bjorn Helgaas <bhelgaas@...gle.com>
> Cc: Yaowei Bai <baiyaowei@...s.chinamobile.com>
> Cc: Takashi Iwai <tiwai@...e.de>
> ---
>
> b/drivers/dax/Kconfig | 5 ++
> b/drivers/dax/Makefile | 1
> b/drivers/dax/kmem.c | 93 +++++++++++++++++++++++++++++++++++++++++++++++++
> 3 files changed, 99 insertions(+)
>
> diff -puN drivers/dax/Kconfig~dax-kmem-try-4 drivers/dax/Kconfig
> --- a/drivers/dax/Kconfig~dax-kmem-try-4 2019-01-08 09:54:44.051694874 -0800
> +++ b/drivers/dax/Kconfig 2019-01-08 09:54:44.056694874 -0800
> @@ -32,6 +32,11 @@ config DEV_DAX_PMEM
>
> Say M if unsure
>
> +config DEV_DAX_KMEM
> + def_bool y
> + depends on DEV_DAX_PMEM # Needs DEV_DAX_PMEM infrastructure
> + depends on MEMORY_HOTPLUG # for add_memory() and friends
> +
I think this should be:
config DEV_DAX_KMEM
tristate "<kmem title>"
depends on DEV_DAX
default DEV_DAX
depends on MEMORY_HOTPLUG # for add_memory() and friends
help
<kmem description>
...because the DEV_DAX_KMEM implementation with the device-DAX reworks
is independent of pmem. It just so happens that pmem is the only
source for device-DAX instances, but that need not always be the case
and kmem is device-DAX origin generic.
> config DEV_DAX_PMEM_COMPAT
> tristate "PMEM DAX: support the deprecated /sys/class/dax interface"
> depends on DEV_DAX_PMEM
> diff -puN /dev/null drivers/dax/kmem.c
> --- /dev/null 2018-12-03 08:41:47.355756491 -0800
> +++ b/drivers/dax/kmem.c 2019-01-08 09:54:44.056694874 -0800
> @@ -0,0 +1,93 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/* Copyright(c) 2016-2018 Intel Corporation. All rights reserved. */
> +#include <linux/memremap.h>
> +#include <linux/pagemap.h>
> +#include <linux/memory.h>
> +#include <linux/module.h>
> +#include <linux/device.h>
> +#include <linux/pfn_t.h>
> +#include <linux/slab.h>
> +#include <linux/dax.h>
> +#include <linux/fs.h>
> +#include <linux/mm.h>
> +#include <linux/mman.h>
> +#include "dax-private.h"
> +#include "bus.h"
> +
> +int dev_dax_kmem_probe(struct device *dev)
> +{
> + struct dev_dax *dev_dax = to_dev_dax(dev);
> + struct resource *res = &dev_dax->region->res;
> + resource_size_t kmem_start;
> + resource_size_t kmem_size;
> + struct resource *new_res;
> + int numa_node;
> + int rc;
> +
> + /* Hotplug starting at the beginning of the next block: */
> + kmem_start = ALIGN(res->start, memory_block_size_bytes());
> +
> + kmem_size = resource_size(res);
> + /* Adjust the size down to compensate for moving up kmem_start: */
> + kmem_size -= kmem_start - res->start;
> + /* Align the size down to cover only complete blocks: */
> + kmem_size &= ~(memory_block_size_bytes() - 1);
> +
> + new_res = devm_request_mem_region(dev, kmem_start, kmem_size,
> + dev_name(dev));
> +
> + if (!new_res) {
> + printk("could not reserve region %016llx -> %016llx\n",
> + kmem_start, kmem_start+kmem_size);
dev_err() please.
> + return -EBUSY;
> + }
> +
> + /*
> + * Set flags appropriate for System RAM. Leave ..._BUSY clear
> + * so that add_memory() can add a child resource.
> + */
> + new_res->flags = IORESOURCE_SYSTEM_RAM;
> + new_res->name = dev_name(dev);
> +
> + numa_node = dev_dax->target_node;
> + if (numa_node < 0) {
> + pr_warn_once("bad numa_node: %d, forcing to 0\n", numa_node);
I think this should be dev_info(dev, "no numa_node, defaulting to
0\n"), or dev_dbg():
1/ so we can backtrack which device is missing numa information
2/ NUMA_NO_NODE may be a common occurrence so it's not really a "warn"
level concern afaics.
3/ no real need for _once I don't see this as a log spam risk.
> + numa_node = 0;
> + }
> +
> + rc = add_memory(numa_node, new_res->start, resource_size(new_res));
> + if (rc)
> + return rc;
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_GPL(dev_dax_kmem_probe);
No need to export this afaics.
> +
> +static int dev_dax_kmem_remove(struct device *dev)
> +{
> + /* Assume that hot-remove will fail for now */
> + return -EBUSY;
> +}
> +
> +static struct dax_device_driver device_dax_kmem_driver = {
> + .drv = {
> + .probe = dev_dax_kmem_probe,
> + .remove = dev_dax_kmem_remove,
> + },
> +};
> +
> +static int __init dax_kmem_init(void)
> +{
> + return dax_driver_register(&device_dax_kmem_driver);
> +}
> +
> +static void __exit dax_kmem_exit(void)
> +{
> + dax_driver_unregister(&device_dax_kmem_driver);
> +}
> +
> +MODULE_AUTHOR("Intel Corporation");
> +MODULE_LICENSE("GPL v2");
> +module_init(dax_kmem_init);
> +module_exit(dax_kmem_exit);
> +MODULE_ALIAS_DAX_DEVICE(0);
> diff -puN drivers/dax/Makefile~dax-kmem-try-4 drivers/dax/Makefile
> --- a/drivers/dax/Makefile~dax-kmem-try-4 2019-01-08 09:54:44.053694874 -0800
> +++ b/drivers/dax/Makefile 2019-01-08 09:54:44.056694874 -0800
> @@ -1,6 +1,7 @@
> # SPDX-License-Identifier: GPL-2.0
> obj-$(CONFIG_DAX) += dax.o
> obj-$(CONFIG_DEV_DAX) += device_dax.o
> +obj-$(CONFIG_DEV_DAX_KMEM) += kmem.o
>
> dax-y := super.o
> dax-y += bus.o
> _
Powered by blists - more mailing lists