| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <20190118152352.26417-2-maxime.chevallier@bootlin.com>
Date: Fri, 18 Jan 2019 16:23:46 +0100
From: Maxime Chevallier <maxime.chevallier@...tlin.com>
To: davem@...emloft.net
Cc: Maxime Chevallier <maxime.chevallier@...tlin.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org,
Andrew Lunn <andrew@...n.ch>,
Florian Fainelli <f.fainelli@...il.com>,
Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>,
linux-arm-kernel@...ts.infradead.org,
Antoine Tenart <antoine.tenart@...tlin.com>,
thomas.petazzoni@...tlin.com, gregory.clement@...tlin.com,
miquel.raynal@...tlin.com, nadavh@...vell.com, stefanc@...vell.com,
mw@...ihalf.com
Subject: [PATCH net-next 1/7] net: phy: Extract genphy_c45_read_abilities from marvell10g
Marvell 10G PHY driver has a generic way of initializing the supported
link modes by reading the PHY's C45 PMA abilities. This can be made
generic, since these registers are part of the 802.3 specifications.
This commit extracts the config_init link_mode initialization code from
marvell10g and uses it to introduce the genphy_c45_read_abilities
function.
Signed-off-by: Maxime Chevallier <maxime.chevallier@...tlin.com>
---
drivers/net/phy/marvell10g.c | 80 ++----------------------------
drivers/net/phy/phy-c45.c | 96 ++++++++++++++++++++++++++++++++++++
include/linux/phy.h | 1 +
3 files changed, 101 insertions(+), 76 deletions(-)
diff --git a/drivers/net/phy/marvell10g.c b/drivers/net/phy/marvell10g.c
index 82ab6ed3b74e..f2a6d6e7041a 100644
--- a/drivers/net/phy/marvell10g.c
+++ b/drivers/net/phy/marvell10g.c
@@ -251,8 +251,7 @@ static int mv3310_resume(struct phy_device *phydev)
static int mv3310_config_init(struct phy_device *phydev)
{
- __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
- int val;
+ int ret;
/* Check that the PHY interface type is compatible */
if (phydev->interface != PHY_INTERFACE_MODE_SGMII &&
@@ -261,81 +260,10 @@ static int mv3310_config_init(struct phy_device *phydev)
phydev->interface != PHY_INTERFACE_MODE_10GKR)
return -ENODEV;
- __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
- __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
-
- if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
- val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
- if (val < 0)
- return val;
-
- if (val & MDIO_AN_STAT1_ABLE)
- __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
- }
-
- val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
- if (val < 0)
- return val;
-
- /* Ethtool does not support the WAN mode bits */
- if (val & (MDIO_PMA_STAT2_10GBSR | MDIO_PMA_STAT2_10GBLR |
- MDIO_PMA_STAT2_10GBER | MDIO_PMA_STAT2_10GBLX4 |
- MDIO_PMA_STAT2_10GBSW | MDIO_PMA_STAT2_10GBLW |
- MDIO_PMA_STAT2_10GBEW))
- __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
- if (val & MDIO_PMA_STAT2_10GBSR)
- __set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, supported);
- if (val & MDIO_PMA_STAT2_10GBLR)
- __set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, supported);
- if (val & MDIO_PMA_STAT2_10GBER)
- __set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, supported);
-
- if (val & MDIO_PMA_STAT2_EXTABLE) {
- val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
- if (val < 0)
- return val;
-
- if (val & (MDIO_PMA_EXTABLE_10GBT | MDIO_PMA_EXTABLE_1000BT |
- MDIO_PMA_EXTABLE_100BTX | MDIO_PMA_EXTABLE_10BT))
- __set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
- if (val & MDIO_PMA_EXTABLE_10GBLRM)
- __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
- if (val & (MDIO_PMA_EXTABLE_10GBKX4 | MDIO_PMA_EXTABLE_10GBKR |
- MDIO_PMA_EXTABLE_1000BKX))
- __set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, supported);
- if (val & MDIO_PMA_EXTABLE_10GBLRM)
- __set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
- supported);
- if (val & MDIO_PMA_EXTABLE_10GBT)
- __set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
- supported);
- if (val & MDIO_PMA_EXTABLE_10GBKX4)
- __set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
- supported);
- if (val & MDIO_PMA_EXTABLE_10GBKR)
- __set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
- supported);
- if (val & MDIO_PMA_EXTABLE_1000BT)
- __set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
- supported);
- if (val & MDIO_PMA_EXTABLE_1000BKX)
- __set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
- supported);
- if (val & MDIO_PMA_EXTABLE_100BTX) {
- __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
- supported);
- __set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
- supported);
- }
- if (val & MDIO_PMA_EXTABLE_10BT) {
- __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
- supported);
- __set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
- supported);
- }
- }
+ ret = genphy_c45_read_abilities(phydev);
+ if (ret)
+ return ret;
- linkmode_copy(phydev->supported, supported);
linkmode_and(phydev->advertising, phydev->advertising,
phydev->supported);
diff --git a/drivers/net/phy/phy-c45.c b/drivers/net/phy/phy-c45.c
index 03af927fa5ad..31806b432734 100644
--- a/drivers/net/phy/phy-c45.c
+++ b/drivers/net/phy/phy-c45.c
@@ -267,6 +267,102 @@ int genphy_c45_read_mdix(struct phy_device *phydev)
}
EXPORT_SYMBOL_GPL(genphy_c45_read_mdix);
+/**
+ * genphy_c45_read_abilities - read supported link modes from PMA
+ * @phydev: target phy_device struct
+ *
+ * Read the supported link modes from the PMA Status 2 (1.8) register. If bit
+ * 1.8.9 is set, the list of supported modes is completed with the values in the
+ * PMA Extended Abilities (1.11) register, indicating 1000BASET an 10G related
+ * modes. If bit 1.11.14 is set, then the list is also completed with the modes
+ * in the 2.5G/5G PMA Extended register (1.21), indicating if 2.5GBASET and
+ * 5GBASET are supported.
+ */
+int genphy_c45_read_abilities(struct phy_device *phydev)
+{
+ __ETHTOOL_DECLARE_LINK_MODE_MASK(supported) = { 0, };
+ int val;
+
+ __set_bit(ETHTOOL_LINK_MODE_Pause_BIT, supported);
+ __set_bit(ETHTOOL_LINK_MODE_Asym_Pause_BIT, supported);
+
+ if (phydev->c45_ids.devices_in_package & MDIO_DEVS_AN) {
+ val = phy_read_mmd(phydev, MDIO_MMD_AN, MDIO_STAT1);
+ if (val < 0)
+ return val;
+
+ if (val & MDIO_AN_STAT1_ABLE)
+ __set_bit(ETHTOOL_LINK_MODE_Autoneg_BIT, supported);
+ }
+
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_STAT2);
+ if (val < 0)
+ return val;
+
+ /* Ethtool does not support the WAN mode bits */
+ if (val & (MDIO_PMA_STAT2_10GBSR | MDIO_PMA_STAT2_10GBLR |
+ MDIO_PMA_STAT2_10GBER | MDIO_PMA_STAT2_10GBLX4 |
+ MDIO_PMA_STAT2_10GBSW | MDIO_PMA_STAT2_10GBLW |
+ MDIO_PMA_STAT2_10GBEW))
+ __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
+ if (val & MDIO_PMA_STAT2_10GBSR)
+ __set_bit(ETHTOOL_LINK_MODE_10000baseSR_Full_BIT, supported);
+ if (val & MDIO_PMA_STAT2_10GBLR)
+ __set_bit(ETHTOOL_LINK_MODE_10000baseLR_Full_BIT, supported);
+ if (val & MDIO_PMA_STAT2_10GBER)
+ __set_bit(ETHTOOL_LINK_MODE_10000baseER_Full_BIT, supported);
+
+ if (val & MDIO_PMA_STAT2_EXTABLE) {
+ val = phy_read_mmd(phydev, MDIO_MMD_PMAPMD, MDIO_PMA_EXTABLE);
+ if (val < 0)
+ return val;
+
+ if (val & (MDIO_PMA_EXTABLE_10GBT | MDIO_PMA_EXTABLE_1000BT |
+ MDIO_PMA_EXTABLE_100BTX | MDIO_PMA_EXTABLE_10BT))
+ __set_bit(ETHTOOL_LINK_MODE_TP_BIT, supported);
+ if (val & MDIO_PMA_EXTABLE_10GBLRM)
+ __set_bit(ETHTOOL_LINK_MODE_FIBRE_BIT, supported);
+ if (val & (MDIO_PMA_EXTABLE_10GBKX4 | MDIO_PMA_EXTABLE_10GBKR |
+ MDIO_PMA_EXTABLE_1000BKX))
+ __set_bit(ETHTOOL_LINK_MODE_Backplane_BIT, supported);
+ if (val & MDIO_PMA_EXTABLE_10GBLRM)
+ __set_bit(ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT,
+ supported);
+ if (val & MDIO_PMA_EXTABLE_10GBT)
+ __set_bit(ETHTOOL_LINK_MODE_10000baseT_Full_BIT,
+ supported);
+ if (val & MDIO_PMA_EXTABLE_10GBKX4)
+ __set_bit(ETHTOOL_LINK_MODE_10000baseKX4_Full_BIT,
+ supported);
+ if (val & MDIO_PMA_EXTABLE_10GBKR)
+ __set_bit(ETHTOOL_LINK_MODE_10000baseKR_Full_BIT,
+ supported);
+ if (val & MDIO_PMA_EXTABLE_1000BT)
+ __set_bit(ETHTOOL_LINK_MODE_1000baseT_Full_BIT,
+ supported);
+ if (val & MDIO_PMA_EXTABLE_1000BKX)
+ __set_bit(ETHTOOL_LINK_MODE_1000baseKX_Full_BIT,
+ supported);
+ if (val & MDIO_PMA_EXTABLE_100BTX) {
+ __set_bit(ETHTOOL_LINK_MODE_100baseT_Full_BIT,
+ supported);
+ __set_bit(ETHTOOL_LINK_MODE_100baseT_Half_BIT,
+ supported);
+ }
+ if (val & MDIO_PMA_EXTABLE_10BT) {
+ __set_bit(ETHTOOL_LINK_MODE_10baseT_Full_BIT,
+ supported);
+ __set_bit(ETHTOOL_LINK_MODE_10baseT_Half_BIT,
+ supported);
+ }
+ }
+
+ linkmode_copy(phydev->supported, supported);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(genphy_c45_read_abilities);
+
/* The gen10g_* functions are the old Clause 45 stub */
int gen10g_config_aneg(struct phy_device *phydev)
diff --git a/include/linux/phy.h b/include/linux/phy.h
index f1c19bf8c658..a639c3c2d3af 100644
--- a/include/linux/phy.h
+++ b/include/linux/phy.h
@@ -1017,6 +1017,7 @@ int genphy_c45_read_pma(struct phy_device *phydev);
int genphy_c45_pma_setup_forced(struct phy_device *phydev);
int genphy_c45_an_disable_aneg(struct phy_device *phydev);
int genphy_c45_read_mdix(struct phy_device *phydev);
+int genphy_c45_read_abilities(struct phy_device *phydev);
/* The gen10g_* functions are the old Clause 45 stub */
int gen10g_config_aneg(struct phy_device *phydev);
--
2.19.2
Powered by blists - more mailing lists