linux-kernel - [PATCH 08/10] arm64: dts: allwinner: h5: orange-pi-prime: Add CPU regulator supply

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20190130084203.25053-9-wens@csie.org>
Date:   Wed, 30 Jan 2019 16:42:01 +0800
From:   Chen-Yu Tsai <wens@...e.org>
To:     Maxime Ripard <maxime.ripard@...tlin.com>
Cc:     linux-sunxi@...glegroups.com, Icenowy Zheng <icenowy@...c.io>,
        Andre Przywara <andre.przywara@....com>,
        Emmanuel Vadot <manu@...ebsd.org>,
        Jagan Teki <jagan@...rulasolutions.com>,
        Sergey Matyukevich <geomatsi@...il.com>,
        Hauke Mehrtens <hauke@...ke-m.de>,
        Chen-Yu Tsai <wens@...e.org>,
        linux-arm-kernel@...ts.infradead.org, devicetree@...r.kernel.org,
        linux-kernel@...r.kernel.org
Subject: [PATCH 08/10] arm64: dts: allwinner: h5: orange-pi-prime: Add CPU regulator supply

The OrangePi Prime uses a Silergy SY8106A regulator to supply the CPU
cores. The fixed voltage when I2C programmed regulation is not in action
is slightly higher than 1.1V. The value in the device tree description
is based on calculations of the resistor values from the schematics.

Cc: Icenowy Zheng <icenowy@...c.io>
Signed-off-by: Chen-Yu Tsai <wens@...e.org>

---

This patch is based on the schematics and has not been tested on an
actual board.
---
 .../allwinner/sun50i-h5-orangepi-prime.dts    | 28 +++++++++++++++++++
 1 file changed, 28 insertions(+)

diff --git a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
index b75ca4d7d001..e866a0734bb3 100644
--- a/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
+++ b/arch/arm64/boot/dts/allwinner/sun50i-h5-orangepi-prime.dts
@@ -139,6 +139,10 @@
 	status = "okay";
 };
 
+&cpu0 {
+	cpu-supply = <&reg_vdd_cpux>;
+};
+
 &de {
 	status = "okay";
 };
@@ -222,6 +226,30 @@
 	status = "okay";
 };
 
+&r_i2c {
+	status = "okay";
+
+	reg_vdd_cpux: regulator@65 {
+		compatible = "silergy,sy8106a";
+		reg = <0x65>;
+		regulator-name = "vdd-cpux";
+		silergy,fixed-microvolt = <1108474>;
+		/*
+		 * The datasheet uses 1.1V as the minimum value of VDD-CPUX,
+		 * however both the Armbian DVFS table and the official one
+		 * have operating points with voltage under 1.1V, and both
+		 * DVFS table are known to work properly at the lowest
+		 * operating point.
+		 *
+		 * Use 1.0V as the minimum voltage instead.
+		 */
+		regulator-min-microvolt = <1000000>;
+		regulator-max-microvolt = <1300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+};
+
 &uart0 {
 	pinctrl-names = "default";
 	pinctrl-0 = <&uart0_pins_a>;
-- 
2.20.1