[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1548866336-14765-5-git-send-email-fabrice.gasnier@st.com>
Date: Wed, 30 Jan 2019 17:38:56 +0100
From: Fabrice Gasnier <fabrice.gasnier@...com>
To: <srinivas.kandagatla@...aro.org>, <robh+dt@...nel.org>,
<alexandre.torgue@...com>
CC: <mark.rutland@....com>, <mcoquelin.stm32@...il.com>,
<fabrice.gasnier@...com>, <lionel.debieve@...com>,
<devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: [PATCH 4/4] ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
Add & enable stm32 factory-programmed memory. Describe temperature sensor
calibration cells. Non-volatile calibration data is made available by
stm32mp157c bootrom in bsec_dataX registers.
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@...com>
---
arch/arm/boot/dts/stm32mp157c.dtsi | 13 +++++++++++++
1 file changed, 13 insertions(+)
diff --git a/arch/arm/boot/dts/stm32mp157c.dtsi b/arch/arm/boot/dts/stm32mp157c.dtsi
index 8bf1c17..9a7ac80 100644
--- a/arch/arm/boot/dts/stm32mp157c.dtsi
+++ b/arch/arm/boot/dts/stm32mp157c.dtsi
@@ -1106,6 +1106,19 @@
status = "disabled";
};
+ bsec: nvmem@...05000 {
+ compatible = "st,stm32mp15-bsec";
+ reg = <0x5c005000 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ts_cal1: calib@5c {
+ reg = <0x5c 0x2>;
+ };
+ ts_cal2: calib@5e {
+ reg = <0x5e 0x2>;
+ };
+ };
+
i2c6: i2c@...09000 {
compatible = "st,stm32f7-i2c";
reg = <0x5c009000 0x400>;
--
1.9.1
Powered by blists - more mailing lists