[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <4aaa83b2-35a6-e2c2-a3f4-6579b5d67038@st.com>
Date: Wed, 13 Feb 2019 11:15:44 +0100
From: Fabrice Gasnier <fabrice.gasnier@...com>
To: <srinivas.kandagatla@...aro.org>, <robh+dt@...nel.org>,
<alexandre.torgue@...com>
CC: <mark.rutland@....com>, <mcoquelin.stm32@...il.com>,
<lionel.debieve@...com>, <devicetree@...r.kernel.org>,
<linux-stm32@...md-mailman.stormreply.com>,
<linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
Subject: Re: [PATCH 0/4] Add nvmem support on STM32
On 1/30/19 5:38 PM, Fabrice Gasnier wrote:
> Non volatile memory area is available on STM32. It contains various
> factory programmed information such as unique device ID, analog calibration...
> This patchset adds NVMEM support to access these data.
Hello,
Gentle reminder for this new driver review
Best Regards,
Fabrice
>
> Fabrice Gasnier (4):
> dt-bindings: nvmem: Add STM32 factory-programmed romem
> nvmem: Add driver for STM32 factory-programmed read only mem
> nvmem: stm32: add support for STM32MP15 BSEC to control OTP data
> ARM: dts: stm32: Add romem and temperature calibration on stm32mp157c
>
> .../devicetree/bindings/nvmem/st,stm32-romem.txt | 31 ++++
> arch/arm/boot/dts/stm32mp157c.dtsi | 13 ++
> drivers/nvmem/Kconfig | 10 +
> drivers/nvmem/Makefile | 2 +
> drivers/nvmem/stm32-romem.c | 202 +++++++++++++++++++++
> 5 files changed, 258 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/nvmem/st,stm32-romem.txt
> create mode 100644 drivers/nvmem/stm32-romem.c
>
Powered by blists - more mailing lists