[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <5c58562b069b8b09ae44b344bb20252ed385993b.1548935790.git.matti.vaittinen@fi.rohmeurope.com>
Date: Thu, 31 Jan 2019 14:02:49 +0200
From: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
To: mazziesaccount@...il.com, matti.vaittinen@...rohmeurope.com
Cc: heikki.haikola@...rohmeurope.com, mikko.mutanen@...rohmeurope.com,
lee.jones@...aro.org, robh+dt@...nel.org, mark.rutland@....com,
broonie@...nel.org, gregkh@...uxfoundation.org, rafael@...nel.org,
mturquette@...libre.com, sboyd@...nel.org,
linus.walleij@...aro.org, bgolaszewski@...libre.com,
sre@...nel.org, lgirdwood@...il.com, a.zummo@...ertech.it,
alexandre.belloni@...tlin.com, wim@...ux-watchdog.org,
linux@...ck-us.net, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-clk@...r.kernel.org,
linux-gpio@...r.kernel.org, linux-pm@...r.kernel.org,
linux-rtc@...r.kernel.org, linux-watchdog@...r.kernel.org
Subject: [RFC PATCH v4 02/10] regulator: bd718x7 use chip specific and
generic data structs
Header rohm-bd718x7.h was split to generic and component specific
parts. This changed the struct bd718x7. Adapt the regulator driver to
these changes.
Signed-off-by: Matti Vaittinen <matti.vaittinen@...rohmeurope.com>
Acked-by: Mark Brown <broonie@...nel.org>
---
drivers/regulator/bd718x7-regulator.c | 22 +++++++++++-----------
1 file changed, 11 insertions(+), 11 deletions(-)
diff --git a/drivers/regulator/bd718x7-regulator.c b/drivers/regulator/bd718x7-regulator.c
index ccea133778c8..9109920b4a06 100644
--- a/drivers/regulator/bd718x7-regulator.c
+++ b/drivers/regulator/bd718x7-regulator.c
@@ -1018,11 +1018,11 @@ static int bd718xx_probe(struct platform_device *pdev)
struct bd718xx *mfd;
struct regulator_config config = { 0 };
struct bd718xx_pmic_inits pmic_regulators[] = {
- [BD718XX_TYPE_BD71837] = {
+ [ROHM_CHIP_TYPE_BD71837] = {
.r_datas = bd71837_regulators,
.r_amount = ARRAY_SIZE(bd71837_regulators),
},
- [BD718XX_TYPE_BD71847] = {
+ [ROHM_CHIP_TYPE_BD71847] = {
.r_datas = bd71847_regulators,
.r_amount = ARRAY_SIZE(bd71847_regulators),
},
@@ -1037,15 +1037,15 @@ static int bd718xx_probe(struct platform_device *pdev)
goto err;
}
- if (mfd->chip_type >= BD718XX_TYPE_AMOUNT ||
- !pmic_regulators[mfd->chip_type].r_datas) {
+ if (mfd->chip.chip_type >= ROHM_CHIP_TYPE_AMOUNT ||
+ !pmic_regulators[mfd->chip.chip_type].r_datas) {
dev_err(&pdev->dev, "Unsupported chip type\n");
err = -EINVAL;
goto err;
}
/* Register LOCK release */
- err = regmap_update_bits(mfd->regmap, BD718XX_REG_REGLOCK,
+ err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_REGLOCK,
(REGLOCK_PWRSEQ | REGLOCK_VREG), 0);
if (err) {
dev_err(&pdev->dev, "Failed to unlock PMIC (%d)\n", err);
@@ -1065,7 +1065,7 @@ static int bd718xx_probe(struct platform_device *pdev)
* for all reset types because OTP loading at READY will clear SEL
* bit allowing HW defaults for power rails to be used
*/
- err = regmap_update_bits(mfd->regmap, BD718XX_REG_TRANS_COND1,
+ err = regmap_update_bits(mfd->chip.regmap, BD718XX_REG_TRANS_COND1,
BD718XX_ON_REQ_POWEROFF_MASK |
BD718XX_SWRESET_POWEROFF_MASK |
BD718XX_WDOG_POWEROFF_MASK |
@@ -1078,17 +1078,17 @@ static int bd718xx_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "Changed all resets from SVNS to READY\n");
}
- for (i = 0; i < pmic_regulators[mfd->chip_type].r_amount; i++) {
+ for (i = 0; i < pmic_regulators[mfd->chip.chip_type].r_amount; i++) {
const struct regulator_desc *desc;
struct regulator_dev *rdev;
const struct bd718xx_regulator_data *r;
- r = &pmic_regulators[mfd->chip_type].r_datas[i];
+ r = &pmic_regulators[mfd->chip.chip_type].r_datas[i];
desc = &r->desc;
config.dev = pdev->dev.parent;
- config.regmap = mfd->regmap;
+ config.regmap = mfd->chip.regmap;
rdev = devm_regulator_register(&pdev->dev, desc, &config);
if (IS_ERR(rdev)) {
@@ -1104,7 +1104,7 @@ static int bd718xx_probe(struct platform_device *pdev)
* can now switch the control from PMIC state machine to the
* register interface
*/
- err = regmap_update_bits(mfd->regmap, r->init.reg,
+ err = regmap_update_bits(mfd->chip.regmap, r->init.reg,
r->init.mask, r->init.val);
if (err) {
dev_err(&pdev->dev,
@@ -1113,7 +1113,7 @@ static int bd718xx_probe(struct platform_device *pdev)
goto err;
}
for (j = 0; j < r->additional_init_amnt; j++) {
- err = regmap_update_bits(mfd->regmap,
+ err = regmap_update_bits(mfd->chip.regmap,
r->additional_inits[j].reg,
r->additional_inits[j].mask,
r->additional_inits[j].val);
--
2.14.3
--
Matti Vaittinen, Linux device drivers
ROHM Semiconductors, Finland SWDC
Kiviharjunlenkki 1E
90220 OULU
FINLAND
~~~ "I don't think so," said Rene Descartes. Just then, he vanished ~~~
Powered by blists - more mailing lists