| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <1549666649.10972.52.camel@intel.com>
Date: Fri, 8 Feb 2019 22:57:31 +0000
From: "Derrick, Jonathan" <jonathan.derrick@...el.com>
To: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"zub@...ux.fjfi.cvut.cz" <zub@...ux.fjfi.cvut.cz>,
"linux-block@...r.kernel.org" <linux-block@...r.kernel.org>,
"sbauer@...donthack.me" <sbauer@...donthack.me>,
"axboe@...nel.dk" <axboe@...nel.dk>
CC: "jonas.rabenstein@...dium.uni-erlangen.de"
<jonas.rabenstein@...dium.uni-erlangen.de>
Subject: Re: [PATCH v4 04/16] block: sed-opal: close parameter list in
cmd_finalize
Normally I wouldn't like decreasing the readability (having a STARTLIST
without an ENDLIST in the same function), but this makes a lot of sense
with 5/16
Acked-by: Jon Derrick <jonathan.derrick@...el.com>
On Fri, 2019-02-01 at 21:50 +0100, David Kozub wrote:
> Every step ends by calling cmd_finalize (via finalize_and_send)
> yet every step adds the token OPAL_ENDLIST on its own. Moving
> this into cmd_finalize decreases code duplication.
>
> Co-authored-by: Jonas Rabenstein <jonas.rabenstein@...dium.uni-erlangen.de>
> Signed-off-by: David Kozub <zub@...ux.fjfi.cvut.cz>
> Signed-off-by: Jonas Rabenstein <jonas.rabenstein@...dium.uni-erlangen.de>
> Reviewed-by: Scott Bauer <sbauer@...donthack.me>
> ---
> block/sed-opal.c | 25 +++----------------------
> 1 file changed, 3 insertions(+), 22 deletions(-)
>
> diff --git a/block/sed-opal.c b/block/sed-opal.c
> index 980705681806..35b1747b650f 100644
> --- a/block/sed-opal.c
> +++ b/block/sed-opal.c
> @@ -661,6 +661,9 @@ static int cmd_finalize(struct opal_dev *cmd, u32 hsn, u32 tsn)
> struct opal_header *hdr;
> int err = 0;
>
> + /* close parameter list */
> + add_token_u8(&err, cmd, OPAL_ENDLIST);
> +
> add_token_u8(&err, cmd, OPAL_ENDOFDATA);
> add_token_u8(&err, cmd, OPAL_STARTLIST);
> add_token_u8(&err, cmd, 0);
> @@ -1079,7 +1082,6 @@ static int gen_key(struct opal_dev *dev, void *data)
> add_token_bytestring(&err, dev, opalmethod[OPAL_GENKEY],
> OPAL_UID_LENGTH);
> add_token_u8(&err, dev, OPAL_STARTLIST);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> pr_debug("Error building gen key command\n");
> @@ -1142,7 +1144,6 @@ static int get_active_key(struct opal_dev *dev, void *data)
> add_token_u8(&err, dev, 10); /* ActiveKey */
> add_token_u8(&err, dev, OPAL_ENDNAME);
> add_token_u8(&err, dev, OPAL_ENDLIST);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> if (err) {
> pr_debug("Error building get active key command\n");
> return err;
> @@ -1188,7 +1189,6 @@ static int generic_lr_enable_disable(struct opal_dev *dev,
>
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> return err;
> }
>
> @@ -1254,8 +1254,6 @@ static int setup_locking_range(struct opal_dev *dev, void *data)
>
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> -
> }
> if (err) {
> pr_debug("Error building Setup Locking range command.\n");
> @@ -1295,7 +1293,6 @@ static int start_generic_opal_session(struct opal_dev *dev,
>
> switch (auth) {
> case OPAL_ANYBODY_UID:
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> break;
> case OPAL_ADMIN1_UID:
> case OPAL_SID_UID:
> @@ -1308,7 +1305,6 @@ static int start_generic_opal_session(struct opal_dev *dev,
> add_token_bytestring(&err, dev, opaluid[auth],
> OPAL_UID_LENGTH);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> break;
> default:
> pr_debug("Cannot start Admin SP session with auth %d\n", auth);
> @@ -1406,7 +1402,6 @@ static int start_auth_opal_session(struct opal_dev *dev, void *data)
> add_token_u8(&err, dev, 3);
> add_token_bytestring(&err, dev, lk_ul_user, OPAL_UID_LENGTH);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> pr_debug("Error building STARTSESSION command.\n");
> @@ -1429,7 +1424,6 @@ static int revert_tper(struct opal_dev *dev, void *data)
> add_token_bytestring(&err, dev, opalmethod[OPAL_REVERT],
> OPAL_UID_LENGTH);
> add_token_u8(&err, dev, OPAL_STARTLIST);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> if (err) {
> pr_debug("Error building REVERT TPER command.\n");
> return err;
> @@ -1463,7 +1457,6 @@ static int internal_activate_user(struct opal_dev *dev, void *data)
> add_token_u8(&err, dev, OPAL_ENDNAME);
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> pr_debug("Error building Activate UserN command.\n");
> @@ -1490,7 +1483,6 @@ static int erase_locking_range(struct opal_dev *dev, void *data)
> add_token_bytestring(&err, dev, opalmethod[OPAL_ERASE],
> OPAL_UID_LENGTH);
> add_token_u8(&err, dev, OPAL_STARTLIST);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> pr_debug("Error building Erase Locking Range Command.\n");
> @@ -1521,7 +1513,6 @@ static int set_mbr_done(struct opal_dev *dev, void *data)
> add_token_u8(&err, dev, OPAL_ENDNAME);
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> pr_debug("Error Building set MBR Done command\n");
> @@ -1553,7 +1544,6 @@ static int set_mbr_enable_disable(struct opal_dev *dev, void *data)
> add_token_u8(&err, dev, OPAL_ENDNAME);
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> pr_debug("Error Building set MBR done command\n");
> @@ -1585,7 +1575,6 @@ static int generic_pw_cmd(u8 *key, size_t key_len, u8 *cpin_uid,
> add_token_u8(&err, dev, OPAL_ENDNAME);
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> return err;
> }
> @@ -1694,7 +1683,6 @@ static int add_user_to_lr(struct opal_dev *dev, void *data)
> add_token_u8(&err, dev, OPAL_ENDNAME);
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> pr_debug("Error building add user to locking range command.\n");
> @@ -1755,7 +1743,6 @@ static int lock_unlock_locking_range(struct opal_dev *dev, void *data)
>
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> pr_debug("Error building SET command.\n");
> @@ -1843,11 +1830,8 @@ static int activate_lsp(struct opal_dev *dev, void *data)
> }
> add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDNAME);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> -
> } else {
> add_token_u8(&err, dev, OPAL_STARTLIST);
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> }
>
> if (err) {
> @@ -1904,7 +1888,6 @@ static int get_lsp_lifecycle(struct opal_dev *dev, void *data)
> add_token_u8(&err, dev, 6); /* Lifecycle Column */
> add_token_u8(&err, dev, OPAL_ENDNAME);
>
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
> @@ -1964,8 +1947,6 @@ static int get_msid_cpin_pin(struct opal_dev *dev, void *data)
> add_token_u8(&err, dev, 4); /* End Column */
> add_token_u8(&err, dev, 3); /* Lifecycle Column */
> add_token_u8(&err, dev, OPAL_ENDNAME);
> -
> - add_token_u8(&err, dev, OPAL_ENDLIST);
> add_token_u8(&err, dev, OPAL_ENDLIST);
>
> if (err) {
Download attachment "smime.p7s" of type "application/x-pkcs7-signature" (3278 bytes)
Powered by blists - more mailing lists