| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <1549628920-32623-1-git-send-email-sugaya.taichi@socionext.com>
Date: Fri, 8 Feb 2019 21:28:40 +0900
From: Sugaya Taichi <sugaya.taichi@...ionext.com>
To: devicetree@...r.kernel.org, linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Cc: Rob Herring <robh+dt@...nel.org>,
Mark Rutland <mark.rutland@....com>,
Takao Orito <orito.takao@...ionext.com>,
Kazuhiro Kasai <kasai.kazuhiro@...ionext.com>,
Shinji Kanematsu <kanematsu.shinji@...ionext.com>,
Jassi Brar <jaswinder.singh@...aro.org>,
Masami Hiramatsu <masami.hiramatsu@...aro.org>,
Sugaya Taichi <sugaya.taichi@...ionext.com>
Subject: [PATCH v2 13/15] ARM: dts: milbeaut: Add device tree set for the Milbeaut M10V board
Add devicetree for Milbeaut M10V SoC and M10V Evaluation board.
Signed-off-by: Sugaya Taichi <sugaya.taichi@...ionext.com>
---
arch/arm/boot/dts/Makefile | 1 +
arch/arm/boot/dts/milbeaut-m10v-evb.dts | 32 ++++++++
arch/arm/boot/dts/milbeaut-m10v.dtsi | 131 ++++++++++++++++++++++++++++++++
3 files changed, 164 insertions(+)
create mode 100644 arch/arm/boot/dts/milbeaut-m10v-evb.dts
create mode 100644 arch/arm/boot/dts/milbeaut-m10v.dtsi
diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
index bd40148..f697d87 100644
--- a/arch/arm/boot/dts/Makefile
+++ b/arch/arm/boot/dts/Makefile
@@ -1233,6 +1233,7 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += \
mt7623n-bananapi-bpi-r2.dtb \
mt8127-moose.dtb \
mt8135-evbp1.dtb
+dtb-$(CONFIG_ARCH_MILBEAUT) += milbeaut-m10v-evb.dtb
dtb-$(CONFIG_ARCH_ZX) += zx296702-ad1.dtb
dtb-$(CONFIG_ARCH_ASPEED) += \
aspeed-ast2500-evb.dtb \
diff --git a/arch/arm/boot/dts/milbeaut-m10v-evb.dts b/arch/arm/boot/dts/milbeaut-m10v-evb.dts
new file mode 100644
index 0000000..59e8d73
--- /dev/null
+++ b/arch/arm/boot/dts/milbeaut-m10v-evb.dts
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: GPL-2.0
+/* Socionext Milbeaut M10V Evaluation Board */
+/dts-v1/;
+#include "milbeaut-m10v.dtsi"
+
+/ {
+ model = "Socionext M10V EVB";
+ compatible = "socionext,milbeaut-m10v-evb", "socionext,sc2000a";
+
+ aliases {
+ serial1 = &uart1;
+ };
+
+ chosen {
+ bootargs = "init=/sbin/finit rootwait earlycon";
+ stdout-path = "serial1:115200n8";
+ };
+
+ clocks {
+ uclk40xi: uclk40xi {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <40000000>;
+ };
+ };
+
+ memory@...00000 {
+ device_type = "memory";
+ reg = <0x40000000 0x80000000>;
+ };
+
+};
diff --git a/arch/arm/boot/dts/milbeaut-m10v.dtsi b/arch/arm/boot/dts/milbeaut-m10v.dtsi
new file mode 100644
index 0000000..4fc2f8b
--- /dev/null
+++ b/arch/arm/boot/dts/milbeaut-m10v.dtsi
@@ -0,0 +1,131 @@
+// SPDX-License-Identifier: GPL-2.0
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+
+/ {
+ compatible = "socionext,sc2000a";
+ interrupt-parent = <&gic>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+ enable-method = "socionext,milbeaut-m10v-smp";
+ cpu@f00 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf00>;
+ };
+ cpu@f01 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf01>;
+ };
+ cpu@f02 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf02>;
+ };
+ cpu@f03 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a7";
+ reg = <0xf03>;
+ };
+ };
+
+ timer { /* The Generic Timer */
+ compatible = "arm,armv7-timer";
+ interrupts = <GIC_PPI 13
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 14
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 11
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>,
+ <GIC_PPI 10
+ (GIC_CPU_MASK_SIMPLE(4) | IRQ_TYPE_LEVEL_HIGH)>;
+ clock-frequency = <40000000>;
+ always-on;
+ };
+
+ soc {
+ compatible = "simple-bus";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ interrupt-parent = <&gic>;
+
+ gic: interrupt-controller@...00000 {
+ compatible = "arm,cortex-a7-gic";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ reg = <0x1d001000 0x1000>,
+ <0x1d002000 0x1000>; /* CPU I/f base and size */
+ };
+
+ clk: m10v-clock-ctrl@...21000 {
+ compatible = "socionext,milbeaut-m10v-ccu";
+ #clock-cells = <1>;
+ reg = <0x1d021000 0x1000>;
+ clocks = <&uclk40xi>;
+ };
+
+ timer@...00050 { /* 32-bit Reload Timers */
+ compatible = "socionext,milbeaut-timer";
+ reg = <0x1e000050 0x20>;
+ interrupts = <0 91 4>;
+ clocks = <&clk 4>;
+ };
+
+ pinctrl: pinctrl@...22000 {
+ compatible = "socionext,milbeaut-m10v-pinctrl";
+ reg = <0x1d022000 0x1000>,
+ <0x1c26f000 0x1000>;
+ reg-names = "pinctrl", "exiu";
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ clocks = <&clk 4>;
+ interrupts = <0 54 4>, <0 55 4>, <0 56 4>, <0 57 4>,
+ <0 58 4>, <0 59 4>, <0 60 4>, <0 61 4>,
+ <0 62 4>, <0 63 4>, <0 64 4>, <0 65 4>,
+ <0 66 4>, <0 67 4>, <0 68 4>, <0 69 4>;
+ interrupt-names = "pin-48", "pin-49", "pin-50",
+ "pin-51", "pin-52", "pin-53",
+ "pin-54", "pin-55", "pin-56",
+ "pin-57", "pin-58", "pin-59",
+ "pin-60", "pin-61", "pin-62",
+ "pin-63";
+
+ usio1pins: usio1pins {
+ pins = "PE4", "PE5", "P87";
+ function = "usio1";
+ };
+ };
+
+ uart1: serial@...00010 { /* PE4, PE5 */
+ /* Enable this as ttyUSI0 */
+ compatible = "socionext,milbeaut-usio-uart";
+ reg = <0x1e700010 0x10>;
+ interrupts = <0 141 0x4>, <0 149 0x4>;
+ interrupt-names = "rx", "tx";
+ clocks = <&clk 2>;
+ };
+
+ };
+
+ sram@0 {
+ compatible = "mmio-sram";
+ reg = <0x0 0x10000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges = <0 0x0 0x10000>;
+ smp-sram@...0 {
+ compatible = "socionext,milbeaut-smp-sram";
+ reg = <0xf100 0x20>;
+ };
+ };
+};
--
1.9.1
Powered by blists - more mailing lists