[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <1549697850.26316.5.camel@mtksdaap41>
Date: Sat, 9 Feb 2019 15:37:30 +0800
From: Erin Lo <erin.lo@...iatek.com>
To: Matthias Brugger <matthias.bgg@...il.com>
CC: Rob Herring <robh@...nel.org>, Mark Rutland <mark.rutland@....com>,
"Ben Ho" <Ben.Ho@...iatek.com>,
Mars Cheng <mars.cheng@...iatek.com>,
"Mengqi Zhang" <Mengqi.Zhang@...iatek.com>,
linux-clk <linux-clk@...r.kernel.org>,
Hsin-Hsiung Wang <hsin-hsiung.wang@...iatek.com>,
Weiyi Lu <weiyi.lu@...iatek.com>,
Seiya Wang <seiya.wang@...iatek.com>,
"open list:SERIAL DRIVERS" <linux-serial@...r.kernel.org>,
Yingjoe Chen <yingjoe.chen@...iatek.com>,
<devicetree@...r.kernel.org>, Jason Cooper <jason@...edaemon.net>,
Marc Zyngier <marc.zyngier@....com>,
"moderated list:ARM/Mediatek SoC support"
<linux-mediatek@...ts.infradead.org>,
"Thomas Gleixner" <tglx@...utronix.de>,
Eddie Huang <eddie.huang@...iatek.com>,
"moderated list:ARM/FREESCALE IMX / MXC ARM ARCHITECTURE"
<linux-arm-kernel@...ts.infradead.org>,
srv_heupstream <srv_heupstream@...iatek.com>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
Stephen Boyd <sboyd@...eaurora.org>,
<linux-kernel@...r.kernel.org>,
Zhiyong Tao <Zhiyong.Tao@...iatek.com>
Subject: Re: [PATCH v6 6/6] arm64: dts: Add Mediatek SoC MT8183 and
evaluation board dts and Makefile
On Thu, 2019-02-07 at 16:08 +0100, Matthias Brugger wrote:
>
> On 01/02/2019 06:11, Erin Lo wrote:
> > Add back more people since mail server issue
> >
> > On Fri, 2019-02-01 at 11:33 +0800, Erin Lo wrote:
> >> On Thu, 2019-01-31 at 15:10 -0600, Rob Herring wrote:
> >>> On Wed, Jan 30, 2019 at 8:34 PM Erin Lo <erin.lo@...iatek.com> wrote:
> >>>>
> >>>> On Wed, 2019-01-30 at 10:22 -0600, Rob Herring wrote:
> >>>>> On Thu, Jan 24, 2019 at 04:07:20PM +0800, Erin Lo wrote:
> >>>>>> From: Ben Ho <Ben.Ho@...iatek.com>
> >>>>>>
> >>>>>> Add basic chip support for Mediatek 8183, include
> >>>>>> pinctrl file, uart node with correct uart clocks, pwrap device
> >>>>>>
> >>>>>> Add clock controller nodes, include topckgen, infracfg,
> >>>>>> apmixedsys and subsystem.
> >>>>>>
> >>>>>> Signed-off-by: Ben Ho <Ben.Ho@...iatek.com>
> >>>>>> Signed-off-by: Erin Lo <erin.lo@...iatek.com>
> >>>>>> Signed-off-by: Seiya Wang <seiya.wang@...iatek.com>
> >>>>>> Signed-off-by: Zhiyong Tao <zhiyong.tao@...iatek.com>
> >>>>>> Signed-off-by: Weiyi Lu <weiyi.lu@...iatek.com>
> >>>>>> Signed-off-by: Mengqi Zhang <Mengqi.Zhang@...iatek.com>
> >>>>>> Signed-off-by: Hsin-Hsiung Wang <hsin-hsiung.wang@...iatek.com>
> >>>>>> Signed-off-by: Eddie Huang <eddie.huang@...iatek.com>
> >>>>>> ---
> >>>>>
> >>>>>
> >>>>>> + sysirq: intpol-controller@...0a80 {
> >>>>>
> >>>>> interrupt-controller@...
> >>>>
> >>>> I will modify it in next version.
> >>>>>
> >>>>>
> >>>>> Place all the MMIO peripherals under one or more simple-bus nodes.
> >>>>>
> >>>>> Rob
> >>>>>
> >>>>
> >>>> Do you mean need to add simple-bus like this?
> >>>
> >>> Yes.
> >>
> >> We remove soc because Matthias suggested it in former MTK SoC maybe in
> >> 2015 year.
> >>
> >> We will add it back by your comment.
> >>
> >> Thank you.
> >>
> >> Best Regards,
> >> Erin
> >
> > Hi, Matthias,
> > Do you have any comment here?
>
> Although I wasn't able to find it in the documentation my understanding is, that
> all devices on-chip should be under soc "bus".
>
> I'm sorry if I created confusion with comments in the past.
>
> Regards,
> Matthias
>
OK! we will add soc "bus" back in next version.
Thank you for your comment.
Best Regards,
Erin
> > Thanks
> >
> > Best Regards,
> > Erin
> >>>
> >>>>
> >>>> + soc: soc {
> >>>> + #address-cells = <0x1>;
> >>>> + #size-cells = <0x1>;
> >>>> + ranges = <0 0 0 0xffffffff>;
> >>>> + compatible = "simple-bus";
> >>>>
> >>>> soc_data: soc_data@...00000 {
> >>>> compatible = "mediatek,mt8183-efuse",
> >>>> "mediatek,efuse";
> >>>> reg = <0 0x08000000 0 0x0010>;
> >>>> #address-cells = <1>;
> >>>> #size-cells = <1>;
> >>>> status = "disabled";
> >>>> };
> >>>>
> >>>> gic: interrupt-controller@...00000 {
> >>>> compatible = "arm,gic-v3";
> >>>> #interrupt-cells = <4>;
> >>>>
> >>>> Best Regards,
> >>>> Erin
> >>>>
> >>>>> _______________________________________________
> >>>>> Linux-mediatek mailing list
> >>>>> Linux-mediatek@...ts.infradead.org
> >>>>> http://lists.infradead.org/mailman/listinfo/linux-mediatek
> >>>>
> >>>>
> >>>>
> >>>> _______________________________________________
> >>>> linux-arm-kernel mailing list
> >>>> linux-arm-kernel@...ts.infradead.org
> >>>> http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
> >>
> >
> >
>
> _______________________________________________
> Linux-mediatek mailing list
> Linux-mediatek@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-mediatek
Powered by blists - more mailing lists