[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <66e5d183-6952-44a2-926a-91f4ff363024@st.com>
Date: Thu, 14 Feb 2019 15:51:49 +0000
From: Christophe ROULLIER <christophe.roullier@...com>
To: Andrew Lunn <andrew@...n.ch>
CC: "robh@...nel.org" <robh@...nel.org>,
"davem@...emloft.net" <davem@...emloft.net>,
"joabreu@...opsys.com" <joabreu@...opsys.com>,
"mark.rutland@....com" <mark.rutland@....com>,
"mcoquelin.stm32@...il.com" <mcoquelin.stm32@...il.com>,
Alexandre TORGUE <alexandre.torgue@...com>,
Peppe CAVALLARO <peppe.cavallaro@...com>,
"linux-stm32@...md-mailman.stormreply.com"
<linux-stm32@...md-mailman.stormreply.com>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>,
"netdev@...r.kernel.org" <netdev@...r.kernel.org>
Subject: Re: [PATCH 2/8] net: ethernet: stmmac: update to support all PHY
config for stm32mp157c.
On 2/14/19 4:15 PM, Andrew Lunn wrote:
>> Sorry, I've misunderstood your question ;-)
>>
>> And you spoke about :
>>
>> case PHY_INTERFACE_MODE_RGMII:
>> case PHY_INTERFACE_MODE_RGMII_ID:
>> case PHY_INTERFACE_MODE_RGMII_RXID:
>> case PHY_INTERFACE_MODE_RGMII_TXID:
>>
>> So in my setup I've only RGMII interface, so I've never tested 3 others
>> interfaces (_ID, _RXID, _TXID).
>>
>> So do I need to add cases in my driver ?
>
> Yes. They all indicate the MAC should be using RGMII.
>
> This appears to be an old issue, but now would be a good time to fix
> it.
>
> Andrew
>
Ok Andrew, I will update with these
Thanks
Christophe
Powered by blists - more mailing lists