linux-kernel - [PATCH v2 3/3] arm64: dts: imx8mq: Add the opp table and cores opp properties

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <1550254032-16451-4-git-send-email-abel.vesa@nxp.com>
Date:   Fri, 15 Feb 2019 18:07:24 +0000
From:   Abel Vesa <abel.vesa@....com>
To:     Rob Herring <robh@...nel.org>, Mark Rutland <mark.rutland@....com>,
        Shawn Guo <shawnguo@...nel.org>,
        Sascha Hauer <kernel@...gutronix.de>,
        Lucas Stach <l.stach@...gutronix.de>,
        Angus Ainslie <angus.ainslie@...i.sm>
CC:     Fabio Estevam <fabio.estevam@....com>,
        Anson Huang <anson.huang@....com>,
        "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
        dl-linux-imx <linux-imx@....com>,
        Linux Kernel Mailing List <linux-kernel@...r.kernel.org>,
        "linux-arm-kernel@...ts.infradead.org" 
        <linux-arm-kernel@...ts.infradead.org>,
        Abel Vesa <abel.vesa@....com>
Subject: [PATCH v2 3/3] arm64: dts: imx8mq: Add the opp table and cores opp
 properties

Add the 0.8GHz and 1GHz opps. According to the datasheet:
https://www.nxp.com/docs/en/data-sheet/IMX8MDQLQIEC.pdf
section 3.1.3 Operating ranges.

The 0.8GHz opp runs in nominal mode with the regulator set to 0.9V.
The 1GHz runs in overdrive mode with the regulator set to 1V.

Signed-off-by: Abel Vesa <abel.vesa@....com>
---
 arch/arm64/boot/dts/freescale/imx8mq.dtsi | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq.dtsi b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
index 1a89062..ebdec9e 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq.dtsi
@@ -91,6 +91,7 @@
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_0_opp_table>;
 		};
 
 		A53_1: cpu@1 {
@@ -101,6 +102,7 @@
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_0_opp_table>;
 		};
 
 		A53_2: cpu@2 {
@@ -111,6 +113,7 @@
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_0_opp_table>;
 		};
 
 		A53_3: cpu@3 {
@@ -121,6 +124,7 @@
 			clocks = <&clk IMX8MQ_CLK_ARM>;
 			enable-method = "psci";
 			next-level-cache = <&A53_L2>;
+			operating-points-v2 = <&a53_0_opp_table>;
 		};
 
 		A53_L2: l2-cache0 {
@@ -666,6 +670,25 @@
 			status = "disabled";
 		};
 
+
+		a53_0_opp_table: opp-table {
+			compatible = "operating-points-v2";
+			opp-shared;
+
+			opp-800000000 {
+				opp-hz = /bits/ 64 <800000000>;
+				opp-microvolt = <900000>;
+				clock-latency-ns = <150000>;
+			};
+
+			opp-1000000000 {
+				opp-hz = /bits/ 64 <1000000000>;
+				opp-microvolt = <1000000>;
+				clock-latency-ns = <150000>;
+				opp-suspend;
+			};
+		};
+
 		gic: interrupt-controller@...00000 {
 			compatible = "arm,gic-v3";
 			reg = <0x38800000 0x10000>,	/* GIC Dist */
-- 
2.7.4