| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20190228121602.GI10770@shao2-debian>
Date: Thu, 28 Feb 2019 20:16:03 +0800
From: kernel test robot <rong.a.chen@...el.com>
To: john.hubbard@...il.com
Cc: Andrew Morton <akpm@...ux-foundation.org>, linux-mm@...ck.org,
Al Viro <viro@...iv.linux.org.uk>,
Christian Benvenuti <benve@...co.com>,
Christoph Hellwig <hch@...radead.org>,
Christopher Lameter <cl@...ux.com>,
Dan Williams <dan.j.williams@...el.com>,
Dave Chinner <david@...morbit.com>,
Dennis Dalessandro <dennis.dalessandro@...el.com>,
Doug Ledford <dledford@...hat.com>, Jan Kara <jack@...e.cz>,
Jason Gunthorpe <jgg@...pe.ca>,
Jerome Glisse <jglisse@...hat.com>,
Matthew Wilcox <willy@...radead.org>,
Michal Hocko <mhocko@...nel.org>,
Mike Rapoport <rppt@...ux.ibm.com>,
Mike Marciniszyn <mike.marciniszyn@...el.com>,
Ralph Campbell <rcampbell@...dia.com>,
Tom Talpey <tom@...pey.com>,
LKML <linux-kernel@...r.kernel.org>,
linux-fsdevel@...r.kernel.org, John Hubbard <jhubbard@...dia.com>,
lkp@...org
Subject: [LKP] [mm/gup] cdaa813278:
kernel_selftests.memfd.run_fuse_test.sh.fail
FYI, we noticed the following commit (built with gcc-7):
commit: cdaa813278ddc616ee201eacda77f63996b5dd2d ("[PATCH 4/6] mm/gup: track gup-pinned pages")
url: https://github.com/0day-ci/linux/commits/john-hubbard-gmail-com/RFC-v2-mm-gup-dma-tracking/20190205-001101
in testcase: kernel_selftests
with following parameters:
group: kselftests-02
test-description: The kernel contains a set of "self tests" under the tools/testing/selftests/ directory. These are intended to be small unit tests to exercise individual code paths in the kernel.
test-url: https://www.kernel.org/doc/Documentation/kselftest.txt
on test machine: qemu-system-x86_64 -enable-kvm -cpu SandyBridge -smp 2 -m 4G
caused below changes (please refer to attached dmesg/kmsg for entire log/backtrace):
KERNEL SELFTESTS: linux_headers_dir is /usr/src/linux-headers-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d
2019-02-19 00:14:39 ln -sf /usr/bin/clang-7 /usr/bin/clang
2019-02-19 00:14:39 ln -sf /usr/bin/llc-7 /usr/bin/llc
media_tests test: not in Makefile
2019-02-19 00:14:39 make TARGETS=media_tests
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/media_tests'
gcc -I../ -I../../../../usr/include/ media_device_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/media_tests/media_device_test
gcc -I../ -I../../../../usr/include/ media_device_open.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/media_tests/media_device_open
gcc -I../ -I../../../../usr/include/ video_device_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/media_tests/video_device_test
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/media_tests'
ignored_by_lkp media_tests test
2019-02-19 00:14:40 make run_tests -C membarrier
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/membarrier'
gcc -g -I../../../../usr/include/ membarrier_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/membarrier/membarrier_test
TAP version 13
selftests: membarrier: membarrier_test
========================================
ok 1 sys_membarrier available
ok 2 sys membarrier invalid command test: command = -1, flags = 0, errno = 22. Failed as expected
ok 3 sys membarrier MEMBARRIER_CMD_QUERY invalid flags test: flags = 1, errno = 22. Failed as expected
ok 4 sys membarrier MEMBARRIER_CMD_GLOBAL test: flags = 0
ok 5 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED not registered failure test: flags = 0, errno = 1
ok 6 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED test: flags = 0
ok 7 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED test: flags = 0
ok 8 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE not registered failure test: flags = 0, errno = 1
ok 9 sys membarrier MEMBARRIER_CMD_REGISTER_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0
ok 10 sys membarrier MEMBARRIER_CMD_PRIVATE_EXPEDITED_SYNC_CORE test: flags = 0
ok 11 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0
ok 12 sys membarrier MEMBARRIER_CMD_REGISTER_GLOBAL_EXPEDITED test: flags = 0
ok 13 sys membarrier MEMBARRIER_CMD_GLOBAL_EXPEDITED test: flags = 0
Pass 13 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..13
ok 1..1 selftests: membarrier: membarrier_test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/membarrier'
2019-02-19 00:14:40 make run_tests -C memfd
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/memfd'
gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ -c -o common.o common.c
gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ memfd_test.c common.o -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/memfd/memfd_test
memfd_test.c: In function ‘mfd_assert_get_seals’:
memfd_test.c:74:6: warning: implicit declaration of function ‘fcntl’ [-Wimplicit-function-declaration]
r = fcntl(fd, F_GET_SEALS);
^~~~~
memfd_test.c: In function ‘mfd_assert_open’:
memfd_test.c:197:6: warning: implicit declaration of function ‘open’ [-Wimplicit-function-declaration]
r = open(buf, flags, mode);
^~~~
memfd_test.c: In function ‘mfd_assert_write’:
memfd_test.c:328:6: warning: implicit declaration of function ‘fallocate’ [-Wimplicit-function-declaration]
r = fallocate(fd,
^~~~~~~~~
gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ fuse_mnt.c -lfuse -pthread -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/memfd/fuse_mnt
gcc -D_FILE_OFFSET_BITS=64 -I../../../../include/uapi/ -I../../../../include/ -I../../../../usr/include/ fuse_test.c common.o -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/memfd/fuse_test
fuse_test.c: In function ‘mfd_assert_get_seals’:
fuse_test.c:67:6: warning: implicit declaration of function ‘fcntl’ [-Wimplicit-function-declaration]
r = fcntl(fd, F_GET_SEALS);
^~~~~
fuse_test.c: In function ‘main’:
fuse_test.c:261:7: warning: implicit declaration of function ‘open’ [-Wimplicit-function-declaration]
fd = open(argv[1], O_RDONLY | O_CLOEXEC);
^~~~
TAP version 13
selftests: memfd: memfd_test
========================================
memfd: CREATE
memfd: BASIC
memfd: SEAL-WRITE
memfd: SEAL-SHRINK
memfd: SEAL-GROW
memfd: SEAL-RESIZE
memfd: SHARE-DUP
memfd: SHARE-MMAP
memfd: SHARE-OPEN
memfd: SHARE-FORK
memfd: SHARE-DUP (shared file-table)
memfd: SHARE-MMAP (shared file-table)
memfd: SHARE-OPEN (shared file-table)
memfd: SHARE-FORK (shared file-table)
memfd: DONE
ok 1..1 selftests: memfd: memfd_test [PASS]
selftests: memfd: run_fuse_test.sh
========================================
Aborted
not ok 1..2 selftests: memfd: run_fuse_test.sh [FAIL]
selftests: memfd: run_hugetlbfs_test.sh
========================================
memfd-hugetlb: CREATE
memfd-hugetlb: BASIC
memfd-hugetlb: SEAL-WRITE
memfd-hugetlb: SEAL-SHRINK
memfd-hugetlb: SEAL-GROW
memfd-hugetlb: SEAL-RESIZE
memfd-hugetlb: SHARE-DUP
memfd-hugetlb: SHARE-MMAP
memfd-hugetlb: SHARE-OPEN
memfd-hugetlb: SHARE-FORK
memfd-hugetlb: SHARE-DUP (shared file-table)
memfd-hugetlb: SHARE-MMAP (shared file-table)
memfd-hugetlb: SHARE-OPEN (shared file-table)
memfd-hugetlb: SHARE-FORK (shared file-table)
memfd: DONE
opening: ./mnt/memfd
fuse: DONE
ok 1..3 selftests: memfd: run_hugetlbfs_test.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/memfd'
2019-02-19 00:14:44 make run_tests -C memory-hotplug
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/memory-hotplug'
TAP version 13
selftests: memory-hotplug: mem-on-off-test.sh
========================================
Test scope: 2% hotplug memory
online all hot-pluggable memory in offline state:
SKIPPED - no hot-pluggable memory in offline state
offline 2% hot-pluggable memory in online state
trying to offline 1 out of 14 memory block(s):
online->offline memory1
online all hot-pluggable memory in offline state:
offline->online memory1
Test with memory notifier error injection
ok 1..1 selftests: memory-hotplug: mem-on-off-test.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/memory-hotplug'
2019-02-19 00:14:45 make run_tests -C mount
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/mount'
gcc -Wall -O2 unprivileged-remount-test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/mount/unprivileged-remount-test
TAP version 13
selftests: mount: run_tests.sh
========================================
ok 1..1 selftests: mount: run_tests.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/mount'
2019-02-19 00:14:46 make run_tests -C mqueue
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/mqueue'
gcc -O2 mq_open_tests.c -lrt -lpthread -lpopt -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/mqueue/mq_open_tests
gcc -O2 mq_perf_tests.c -lrt -lpthread -lpopt -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/mqueue/mq_perf_tests
TAP version 13
selftests: mqueue: mq_open_tests
========================================
Using Default queue path - /test1
Initial system state:
Using queue path: /test1
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Default Message Size: 8192
Default Queue Size: 10
Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Default Message Size: 8192
Default Queue Size: 10
Test series 1, behavior when no attr struct passed to mq_open:
Kernel supports setting defaults separately from maximums: PASS
Given sane values, mq_open without an attr struct succeeds: PASS
Kernel properly honors default setting knobs: PASS
Kernel properly limits default values to lesser of default/max: PASS
Kernel properly fails to create queue when defaults would
exceed rlimit: PASS
Test series 2, behavior when attr struct is passed to mq_open:
Queue open in excess of rlimit max when euid = 0 failed: PASS
Queue open with mq_maxmsg > limit when euid = 0 succeeded: PASS
Queue open with mq_msgsize > limit when euid = 0 succeeded: PASS
Queue open with total size > 2GB when euid = 0 failed: PASS
Queue open in excess of rlimit max when euid = 99 failed: PASS
Queue open with mq_maxmsg > limit when euid = 99 failed: PASS
Queue open with mq_msgsize > limit when euid = 99 failed: PASS
Queue open with total size > 2GB when euid = 99 failed: PASS
ok 1..1 selftests: mqueue: mq_open_tests [PASS]
selftests: mqueue: mq_perf_tests
========================================
Initial system state:
Using queue path: /mq_perf_tests
RLIMIT_MSGQUEUE(soft): 819200
RLIMIT_MSGQUEUE(hard): 819200
Maximum Message Size: 8192
Maximum Queue Size: 10
Nice value: 0
Adjusted system state for testing:
RLIMIT_MSGQUEUE(soft): (unlimited)
RLIMIT_MSGQUEUE(hard): (unlimited)
Maximum Message Size: 16777216
Maximum Queue Size: 65530
Nice value: -20
Continuous mode: (disabled)
CPUs to pin: 1
Queue /mq_perf_tests created:
mq_flags: O_NONBLOCK
mq_maxmsg: 65530
mq_msgsize: 16
mq_curmsgs: 0
Started mqueue performance test thread on CPU 1
Max priorities: 32768
Clock resolution: 1 nsec
Test #1: Time send/recv message, queue empty
(10000000 iterations)
Send msg: 20.769811987s total time
2076 nsec/msg
Recv msg: 21.57018776s total time
2105 nsec/msg
Test #2a: Time send/recv message, queue full, constant prio
:
(100000 iterations)
Filling queue...done. 0.69102850s
Testing...done.
Send msg: 0.207365476s total time
2073 nsec/msg
Recv msg: 0.208501734s total time
2085 nsec/msg
Draining queue...done. 0.68079024s
Test #2b: Time send/recv message, queue full, increasing prio
:
(100000 iterations)
Filling queue...done. 0.86926345s
Testing...done.
Send msg: 0.234621580s total time
2346 nsec/msg
Recv msg: 0.223862917s total time
2238 nsec/msg
Draining queue...done. 0.72429194s
Test #2c: Time send/recv message, queue full, decreasing prio
:
(100000 iterations)
Filling queue...done. 0.85459740s
Testing...done.
Send msg: 0.238305053s total time
2383 nsec/msg
Recv msg: 0.223585734s total time
2235 nsec/msg
Draining queue...done. 0.78872582s
Test #2d: Time send/recv message, queue full, random prio
:
(100000 iterations)
Filling queue...done. 0.91103960s
Testing...done.
Send msg: 0.238946474s total time
2389 nsec/msg
Recv msg: 0.217763880s total time
2177 nsec/msg
Draining queue...done. 0.77818648s
ok 1..2 selftests: mqueue: mq_perf_tests [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/mqueue'
2019-02-19 00:15:43 make run_tests -C net
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net'
make ARCH=x86 -C ../../../.. headers_install
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d'
HOSTCC scripts/basic/fixdep
WRAP arch/x86/include/generated/uapi/asm/bpf_perf_event.h
WRAP arch/x86/include/generated/uapi/asm/poll.h
SYSTBL arch/x86/include/generated/asm/syscalls_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_32.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_64.h
SYSHDR arch/x86/include/generated/uapi/asm/unistd_x32.h
HOSTCC arch/x86/tools/relocs_32.o
HOSTCC arch/x86/tools/relocs_64.o
HOSTCC arch/x86/tools/relocs_common.o
HOSTLD arch/x86/tools/relocs
UPD include/generated/uapi/linux/version.h
HOSTCC scripts/unifdef
INSTALL usr/include/asm-generic/ (37 files)
INSTALL usr/include/drm/ (26 files)
INSTALL usr/include/linux/ (503 files)
INSTALL usr/include/linux/android/ (2 files)
INSTALL usr/include/linux/byteorder/ (2 files)
INSTALL usr/include/linux/caif/ (2 files)
INSTALL usr/include/linux/can/ (6 files)
INSTALL usr/include/linux/cifs/ (1 file)
INSTALL usr/include/linux/dvb/ (8 files)
INSTALL usr/include/linux/genwqe/ (1 file)
INSTALL usr/include/linux/hdlc/ (1 file)
INSTALL usr/include/linux/hsi/ (2 files)
INSTALL usr/include/linux/iio/ (2 files)
INSTALL usr/include/linux/isdn/ (1 file)
INSTALL usr/include/linux/mmc/ (1 file)
INSTALL usr/include/linux/netfilter/ (88 files)
INSTALL usr/include/linux/netfilter/ipset/ (4 files)
INSTALL usr/include/linux/netfilter_arp/ (2 files)
INSTALL usr/include/linux/netfilter_bridge/ (17 files)
INSTALL usr/include/linux/netfilter_ipv4/ (9 files)
INSTALL usr/include/linux/netfilter_ipv6/ (13 files)
INSTALL usr/include/linux/nfsd/ (5 files)
INSTALL usr/include/linux/raid/ (2 files)
INSTALL usr/include/linux/sched/ (1 file)
INSTALL usr/include/linux/spi/ (1 file)
INSTALL usr/include/linux/sunrpc/ (1 file)
INSTALL usr/include/linux/tc_act/ (15 files)
INSTALL usr/include/linux/tc_ematch/ (5 files)
INSTALL usr/include/linux/usb/ (13 files)
INSTALL usr/include/linux/wimax/ (1 file)
INSTALL usr/include/misc/ (2 files)
INSTALL usr/include/mtd/ (5 files)
INSTALL usr/include/rdma/ (25 files)
INSTALL usr/include/rdma/hfi/ (2 files)
INSTALL usr/include/scsi/ (5 files)
INSTALL usr/include/scsi/fc/ (4 files)
INSTALL usr/include/sound/ (16 files)
INSTALL usr/include/video/ (3 files)
INSTALL usr/include/xen/ (4 files)
INSTALL usr/include/asm/ (62 files)
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d'
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_bpf.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/reuseport_bpf
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_bpf_cpu.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/reuseport_bpf_cpu
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lnuma reuseport_bpf_numa.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/reuseport_bpf_numa
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_dualstack.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/reuseport_dualstack
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseaddr_conflict.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/reuseaddr_conflict
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ tls.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/tls
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ socket.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/socket
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_fanout.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/psock_fanout
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_tpacket.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/psock_tpacket
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ msg_zerocopy.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/msg_zerocopy
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ reuseport_addr_any.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/reuseport_addr_any
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lpthread tcp_mmap.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/tcp_mmap
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ -lpthread tcp_inq.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/tcp_inq
tcp_inq.c: In function ‘main’:
tcp_inq.c:178:4: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
inq = *((int *) CMSG_DATA(cm));
^~~
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ psock_snd.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/psock_snd
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ txring_overwrite.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/txring_overwrite
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/udpgso
udpgso.c: In function ‘send_one’:
udpgso.c:484:3: warning: dereferencing type-punned pointer will break strict-aliasing rules [-Wstrict-aliasing]
*((uint16_t *) CMSG_DATA(cm)) = gso_len;
^
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso_bench_tx.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/udpgso_bench_tx
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ udpgso_bench_rx.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/udpgso_bench_rx
gcc -Wall -Wl,--no-as-needed -O2 -g -I../../../../usr/include/ ip_defrag.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net/ip_defrag
TAP version 13
selftests: net: reuseport_bpf
========================================
---- IPv4 UDP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 UDP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 UDP w/ mapped IPv4 ----
Testing EBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 20...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 10: 10
Socket 11: 11
Socket 12: 12
Socket 13: 13
Socket 14: 14
Socket 15: 15
Socket 16: 16
Socket 17: 17
Socket 18: 18
Socket 19: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 10: 30
Socket 11: 31
Socket 12: 32
Socket 13: 33
Socket 14: 34
Socket 15: 35
Socket 16: 36
Socket 17: 37
Socket 18: 38
Socket 19: 39
Reprograming, testing mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Socket 0: 20
Socket 1: 21
Socket 2: 22
Socket 3: 23
Socket 4: 24
Socket 5: 25
Socket 6: 26
Socket 7: 27
Socket 8: 28
Socket 9: 29
Socket 0: 30
Socket 1: 31
Socket 2: 32
Socket 3: 33
Socket 4: 34
Socket 5: 35
Socket 6: 36
Socket 7: 37
Socket 8: 38
Socket 9: 39
---- IPv4 TCP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 TCP ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing too many filters...
Testing filters on non-SO_REUSEPORT socket...
---- IPv6 TCP w/ mapped IPv4 ----
Testing EBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing CBPF mod 10...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 5: 5
Socket 6: 6
Socket 7: 7
Socket 8: 8
Socket 9: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 5: 15
Socket 6: 16
Socket 7: 17
Socket 8: 18
Socket 9: 19
Reprograming, testing mod 5...
Socket 0: 0
Socket 1: 1
Socket 2: 2
Socket 3: 3
Socket 4: 4
Socket 0: 5
Socket 1: 6
Socket 2: 7
Socket 3: 8
Socket 4: 9
Socket 0: 10
Socket 1: 11
Socket 2: 12
Socket 3: 13
Socket 4: 14
Socket 0: 15
Socket 1: 16
Socket 2: 17
Socket 3: 18
Socket 4: 19
Testing filter add without bind...
SUCCESS
ok 1..1 selftests: net: reuseport_bpf [PASS]
selftests: net: reuseport_bpf_cpu
========================================
---- IPv4 UDP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv6 UDP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv4 TCP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
---- IPv6 TCP ----
send cpu 0, receive socket 0
send cpu 1, receive socket 1
send cpu 1, receive socket 1
send cpu 0, receive socket 0
send cpu 0, receive socket 0
send cpu 1, receive socket 1
SUCCESS
ok 1..2 selftests: net: reuseport_bpf_cpu [PASS]
selftests: net: reuseport_bpf_numa
========================================
---- IPv4 UDP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv6 UDP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv4 TCP ----
send node 0, receive socket 0
send node 0, receive socket 0
---- IPv6 TCP ----
send node 0, receive socket 0
send node 0, receive socket 0
SUCCESS
ok 1..3 selftests: net: reuseport_bpf_numa [PASS]
selftests: net: reuseport_dualstack
========================================
---- UDP IPv4 created before IPv6 ----
---- UDP IPv6 created before IPv4 ----
---- UDP IPv4 created before IPv6 (large) ----
---- UDP IPv6 created before IPv4 (large) ----
---- TCP IPv4 created before IPv6 ----
---- TCP IPv6 created before IPv4 ----
SUCCESS
ok 1..4 selftests: net: reuseport_dualstack [PASS]
selftests: net: reuseaddr_conflict
========================================
Opening 127.0.0.1:9999
Opening INADDR_ANY:9999
bind: Address already in use
Opening in6addr_any:9999
Opening INADDR_ANY:9999
bind: Address already in use
Opening INADDR_ANY:9999 after closing ipv6 socket
bind: Address already in use
Successok 1..5 selftests: net: reuseaddr_conflict [PASS]
selftests: net: tls
========================================
[==========] Running 29 tests from 2 test cases.
[ RUN ] tls.sendfile
[ OK ] tls.sendfile
[ RUN ] tls.send_then_sendfile
[ OK ] tls.send_then_sendfile
[ RUN ] tls.recv_max
[ OK ] tls.recv_max
[ RUN ] tls.recv_small
[ OK ] tls.recv_small
[ RUN ] tls.msg_more
[ OK ] tls.msg_more
[ RUN ] tls.sendmsg_single
[ OK ] tls.sendmsg_single
[ RUN ] tls.sendmsg_large
[ OK ] tls.sendmsg_large
[ RUN ] tls.sendmsg_multiple
[ OK ] tls.sendmsg_multiple
[ RUN ] tls.sendmsg_multiple_stress
[ OK ] tls.sendmsg_multiple_stress
[ RUN ] tls.splice_from_pipe
[ OK ] tls.splice_from_pipe
[ RUN ] tls.splice_from_pipe2
[ OK ] tls.splice_from_pipe2
[ RUN ] tls.send_and_splice
[ OK ] tls.send_and_splice
[ RUN ] tls.splice_to_pipe
[ OK ] tls.splice_to_pipe
[ RUN ] tls.recvmsg_single
[ OK ] tls.recvmsg_single
[ RUN ] tls.recvmsg_single_max
[ OK ] tls.recvmsg_single_max
[ RUN ] tls.recvmsg_multiple
[ OK ] tls.recvmsg_multiple
[ RUN ] tls.single_send_multiple_recv
[ OK ] tls.single_send_multiple_recv
[ RUN ] tls.multiple_send_single_recv
[ OK ] tls.multiple_send_single_recv
[ RUN ] tls.recv_partial
[ OK ] tls.recv_partial
[ RUN ] tls.recv_nonblock
[ OK ] tls.recv_nonblock
[ RUN ] tls.recv_peek
[ OK ] tls.recv_peek
[ RUN ] tls.recv_peek_multiple
[ OK ] tls.recv_peek_multiple
[ RUN ] tls.recv_peek_multiple_records
[ OK ] tls.recv_peek_multiple_records
[ RUN ] tls.recv_peek_large_buf_mult_recs
[ OK ] tls.recv_peek_large_buf_mult_recs
[ RUN ] tls.pollin
[ OK ] tls.pollin
[ RUN ] tls.poll_wait
[ OK ] tls.poll_wait
[ RUN ] tls.blocking
[ OK ] tls.blocking
[ RUN ] tls.nonblocking
[ OK ] tls.nonblocking
[ RUN ] tls.control_msg
[ OK ] tls.control_msg
[==========] 29 / 29 tests passed.
[ PASSED ]
ok 1..6 selftests: net: tls [PASS]
selftests: net: run_netsocktests
========================================
--------------------
running socket test
--------------------
[PASS]
ok 1..7 selftests: net: run_netsocktests [PASS]
selftests: net: run_afpackettests
========================================
--------------------
running psock_fanout test
--------------------
test: control single socket
test: control multiple sockets
test: unique ids
test: datapath 0x0 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=5,20, expect=20,5
test: datapath 0x1000 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=15,20, expect=20,15
test: datapath 0x1 ports 8000,8002
info: count=0,0, expect=0,0
info: count=10,10, expect=10,10
info: count=17,18, expect=18,17
test: datapath 0x3 ports 8000,8002
info: count=0,0, expect=0,0
info: count=15,5, expect=15,5
info: count=20,15, expect=20,15
test: datapath 0x6 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=20,15, expect=15,20
test: datapath 0x7 ports 8000,8002
info: count=0,0, expect=0,0
info: count=5,15, expect=15,5
info: count=20,15, expect=15,20
test: datapath 0x2 ports 8000,8002
info: count=0,0, expect=0,0
info: count=20,0, expect=20,0
info: count=20,0, expect=20,0
test: datapath 0x2 ports 8000,8002
info: count=0,0, expect=0,0
info: count=0,20, expect=0,20
info: count=0,20, expect=0,20
test: datapath 0x2000 ports 8000,8002
info: count=0,0, expect=0,0
info: count=20,20, expect=20,20
info: count=20,20, expect=20,20
OK. All tests passed
[PASS]
--------------------
running psock_tpacket test
--------------------
test: TPACKET_V1 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V1 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V2 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V2 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V3 with PACKET_RX_RING .................... 100 pkts (14200 bytes)
test: TPACKET_V3 with PACKET_TX_RING .................... 100 pkts (14200 bytes)
OK. All tests passed
[PASS]
--------------------
running txring_overwrite test
--------------------
read: a (0x61)
read: b (0x62)
[PASS]
ok 1..8 selftests: net: run_afpackettests [PASS]
selftests: net: test_bpf.sh
========================================
test_bpf: ok
ok 1..9 selftests: net: test_bpf.sh [PASS]
selftests: net: netdevice.sh
========================================
SKIP: eth0: interface already up
Cannot get device udp-fragmentation-offload settings: Operation not supported
PASS: eth0: ethtool list features
PASS: eth0: ethtool dump
PASS: eth0: ethtool stats
SKIP: eth0: interface kept up
ok 1..10 selftests: net: netdevice.sh [PASS]
selftests: net: rtnetlink.sh
========================================
PASS: policy routing
PASS: route get
PASS: tc htb hierarchy
PASS: gre tunnel endpoint
PASS: gretap
RTNETLINK answers: Operation not supported
Cannot find device "ip6gretap00"
Cannot find device "ip6gretap00"
Cannot find device "ip6gretap00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6gretap00"
FAIL: ip6gretap
PASS: erspan
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
Cannot find device "ip6erspan00"
RTNETLINK answers: Operation not supported
Cannot find device "ip6erspan00"
FAIL: ip6erspan
PASS: bridge setup
PASS: ipv6 addrlabel
PASS: set ifalias 58bb7090-b9ad-46cd-ba02-d0c3cc611fa5 for test-dummy0
PASS: vrf
PASS: vxlan
PASS: fou
PASS: macsec
PASS: ipsec
FAIL: ipsec_offload netdevsim doesn't support IPsec offload
SKIP: fdb get tests: iproute2 too old
SKIP: fdb get tests: iproute2 too old
ok 1..11 selftests: net: rtnetlink.sh [PASS]
selftests: net: xfrm_policy.sh
========================================
PASS: policy before exception matches
PASS: ping to .254 bypassed ipsec tunnel
PASS: direct policy matches
PASS: policy matches
ok 1..12 selftests: net: xfrm_policy.sh [PASS]
selftests: net: fib_tests.sh
========================================
Single path route test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Nexthop device deleted
TEST: IPv4 fibmatch - no route [ OK ]
TEST: IPv6 fibmatch - no route [ OK ]
Multipath route test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
One nexthop device deleted
TEST: IPv4 - multipath route removed on delete [ OK ]
TEST: IPv6 - multipath down to single path [ OK ]
Second nexthop device deleted
TEST: IPv6 - no route [ OK ]
Single path, admin down
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Route deleted on down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Admin down multipath
Verify start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
One device down, one up
TEST: IPv4 fibmatch on down device [ OK ]
TEST: IPv6 fibmatch on down device [ OK ]
TEST: IPv4 fibmatch on up device [ OK ]
TEST: IPv6 fibmatch on up device [ OK ]
TEST: IPv4 flags on down device [ OK ]
TEST: IPv6 flags on down device [ OK ]
TEST: IPv4 flags on up device [ OK ]
TEST: IPv6 flags on up device [ OK ]
Other device down and up
TEST: IPv4 fibmatch on down device [ OK ]
TEST: IPv6 fibmatch on down device [ OK ]
TEST: IPv4 fibmatch on up device [ OK ]
TEST: IPv6 fibmatch on up device [ OK ]
TEST: IPv4 flags on down device [ OK ]
TEST: IPv6 flags on down device [ OK ]
TEST: IPv4 flags on up device [ OK ]
TEST: IPv6 flags on up device [ OK ]
Both devices down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
Local carrier tests - single path
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 - no linkdown flag [ OK ]
TEST: IPv6 - no linkdown flag [ OK ]
Carrier off on nexthop
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 - linkdown flag set [ OK ]
TEST: IPv6 - linkdown flag set [ OK ]
Route to local address with carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
Single path route carrier test
Start point
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 no linkdown flag [ OK ]
TEST: IPv6 no linkdown flag [ OK ]
Carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
Second address added with carrier down
TEST: IPv4 fibmatch [ OK ]
TEST: IPv6 fibmatch [ OK ]
TEST: IPv4 linkdown flag set [ OK ]
TEST: IPv6 linkdown flag set [ OK ]
IPv4 nexthop tests
<<< write me >>>
IPv6 nexthop tests
TEST: Directly connected nexthop, unicast address [ OK ]
TEST: Directly connected nexthop, unicast address with device [ OK ]
TEST: Gateway is linklocal address [ OK ]
TEST: Gateway is linklocal address, no device [ OK ]
TEST: Gateway can not be local unicast address [ OK ]
TEST: Gateway can not be local unicast address, with device [ OK ]
TEST: Gateway can not be a local linklocal address [ OK ]
TEST: Gateway can be local address in a VRF [ OK ]
TEST: Gateway can be local address in a VRF, with device [ OK ]
TEST: Gateway can be local linklocal address in a VRF [ OK ]
TEST: Redirect to VRF lookup [ OK ]
TEST: VRF route, gateway can be local address in default VRF [ OK ]
TEST: VRF route, gateway can not be a local address [ OK ]
TEST: VRF route, gateway can not be a local addr with device [ OK ]
IPv6 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv6 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
IPv4 route add / append tests
TEST: Attempt to add duplicate route - gw [ OK ]
TEST: Attempt to add duplicate route - dev only [ OK ]
TEST: Attempt to add duplicate route - reject route [ OK ]
TEST: Add new nexthop for existing prefix [ OK ]
TEST: Append nexthop to existing route - gw [ OK ]
TEST: Append nexthop to existing route - dev only [ OK ]
TEST: Append nexthop to existing route - reject route [ OK ]
TEST: Append nexthop to existing reject route - gw [ OK ]
TEST: Append nexthop to existing reject route - dev only [ OK ]
TEST: add multipath route [ OK ]
TEST: Attempt to add duplicate multipath route [ OK ]
TEST: Route add with different metrics [ OK ]
TEST: Route delete with metric [ OK ]
IPv4 route replace tests
TEST: Single path with single path [ OK ]
TEST: Single path with multipath [ OK ]
TEST: Single path with reject route [ OK ]
TEST: Single path with single path via multipath attribute [ OK ]
TEST: Invalid nexthop [ OK ]
TEST: Single path - replace of non-existent route [ OK ]
TEST: Multipath with multipath [ OK ]
TEST: Multipath with single path [ OK ]
TEST: Multipath with single path via multipath attribute [ OK ]
TEST: Multipath with reject route [ OK ]
TEST: Multipath - invalid first nexthop [ OK ]
TEST: Multipath - invalid second nexthop [ OK ]
TEST: Multipath - replace of non-existent route [ OK ]
IPv6 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
Command line is not complete. Try option "help"
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv4 prefix route tests
TEST: Default metric [ OK ]
TEST: User specified metric on first device [ OK ]
TEST: User specified metric on second device [ OK ]
TEST: Delete of address on first device [ OK ]
TEST: Modify metric of address [ OK ]
Command line is not complete. Try option "help"
TEST: Prefix route removed on link down [ OK ]
TEST: Prefix route with metric on link up [ OK ]
IPv6 routes with metrics
TEST: Single path route with mtu metric [ OK ]
TEST: Multipath route via 2 single routes with mtu metric on first [ OK ]
TEST: Multipath route via 2 single routes with mtu metric on 2nd [ OK ]
TEST: MTU of second leg [ OK ]
TEST: Multipath route with mtu metric [ OK ]
TEST: Using route with mtu metric [ OK ]
TEST: Invalid metric (fails metric_convert) [ OK ]
IPv4 route add / append tests
TEST: Single path route with mtu metric [ OK ]
TEST: Multipath route with mtu metric [ OK ]
TEST: Using route with mtu metric [ OK ]
TEST: Invalid metric (fails metric_convert) [ OK ]
Tests passed: 141
Tests failed: 0
ok 1..13 selftests: net: fib_tests.sh [PASS]
selftests: net: fib-onlink-tests.sh
========================================
########################################
Configuring interfaces
RTNETLINK answers: File exists
not ok 1..14 selftests: net: fib-onlink-tests.sh [FAIL]
selftests: net: pmtu.sh
========================================
TEST: ipv4: PMTU exceptions [ OK ]
connect: Cannot assign requested address
connect: Cannot assign requested address
TEST: ipv6: PMTU exceptions [FAIL]
PMTU exception wasn't created after exceeding MTU
TEST: IPv4 over vxlan4: PMTU exceptions [ OK ]
connect: Cannot assign requested address
TEST: IPv6 over vxlan4: PMTU exceptions [FAIL]
PMTU exception wasn't created after exceeding link layer MTU on vxlan interface
TEST: IPv4 over vxlan6: PMTU exceptions [ OK ]
TEST: IPv6 over vxlan6: PMTU exceptions [ OK ]
RTNETLINK answers: Operation not supported
geneve4 not supported
TEST: IPv4 over geneve4: PMTU exceptions [SKIP]
RTNETLINK answers: Operation not supported
geneve4 not supported
TEST: IPv6 over geneve4: PMTU exceptions [SKIP]
RTNETLINK answers: Operation not supported
geneve6 not supported
TEST: IPv4 over geneve6: PMTU exceptions [SKIP]
RTNETLINK answers: Operation not supported
geneve6 not supported
TEST: IPv6 over geneve6: PMTU exceptions [SKIP]
TEST: IPv4 over fou4: PMTU exceptions [ OK ]
TEST: IPv6 over fou4: PMTU exceptions [ OK ]
TEST: IPv4 over fou6: PMTU exceptions [ OK ]
TEST: IPv6 over fou6: PMTU exceptions [ OK ]
TEST: IPv4 over gue4: PMTU exceptions [ OK ]
TEST: IPv6 over gue4: PMTU exceptions [ OK ]
TEST: IPv4 over gue6: PMTU exceptions [ OK ]
TEST: IPv6 over gue6: PMTU exceptions [ OK ]
TEST: vti6: PMTU exceptions [ OK ]
TEST: vti4: PMTU exceptions [ OK ]
TEST: vti4: default MTU assignment [ OK ]
TEST: vti6: default MTU assignment [ OK ]
TEST: vti4: MTU setting on link creation [ OK ]
TEST: vti6: MTU setting on link creation [ OK ]
TEST: vti6: MTU changes on link changes [ OK ]
not ok 1..15 selftests: net: pmtu.sh [FAIL]
selftests: net: udpgso.sh
========================================
ipv4 cmsg
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv4 setsockopt
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv6 cmsg
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ipv6 setsockopt
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ipv4 connected
device mtu (orig): 65536
device mtu (test): 1600
route mtu (test): 1500
path mtu (read): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv4 msg_more
device mtu (orig): 65536
device mtu (test): 1500
ipv4 tx:1 gso:0
ipv4 tx:1472 gso:0
ipv4 tx:1473 gso:0 (fail)
ipv4 tx:1472 gso:1472 (fail)
ipv4 tx:1473 gso:1472
ipv4 tx:2944 gso:1472
ipv4 tx:2945 gso:1472
ipv4 tx:64768 gso:1472
ipv4 tx:65507 gso:1472
ipv4 tx:65508 gso:1472 (fail)
ipv4 tx:1 gso:1 (fail)
ipv4 tx:2 gso:1
ipv4 tx:5 gso:2
ipv4 tx:36 gso:1
ipv4 tx:37 gso:1 (fail)
OK
ipv6 msg_more
device mtu (orig): 65536
device mtu (test): 1500
ipv6 tx:1 gso:0
ipv6 tx:1452 gso:0
ipv6 tx:1453 gso:0 (fail)
ipv6 tx:1452 gso:1452 (fail)
ipv6 tx:1453 gso:1452
ipv6 tx:2904 gso:1452
ipv6 tx:2905 gso:1452
ipv6 tx:65340 gso:1452
ipv6 tx:65527 gso:1452
ipv6 tx:65528 gso:1452 (fail)
ipv6 tx:1 gso:1 (fail)
ipv6 tx:2 gso:1
ipv6 tx:5 gso:2
ipv6 tx:16 gso:1
ipv6 tx:17 gso:1 (fail)
OK
ok 1..16 selftests: net: udpgso.sh [PASS]
selftests: net: ip_defrag.sh
========================================
ipv4 defrag
PASS
seed = 1550506667
ipv4 defrag with overlaps
PASS
seed = 1550506668
ipv6 defrag
PASS
seed = 1550506699
ipv6 defrag with overlaps
PASS
seed = 1550506699
all tests done
ok 1..17 selftests: net: ip_defrag.sh [PASS]
selftests: net: udpgso_bench.sh
========================================
ipv4
tcp
tcp rx: 2473 MB/s 35430 calls/s
tcp tx: 2473 MB/s 41947 calls/s 41947 msg/s
tcp rx: 2778 MB/s 35862 calls/s
tcp tx: 2819 MB/s 47828 calls/s 47828 msg/s
tcp rx: 3248 MB/s 53210 calls/s
tcp tx: 3227 MB/s 54739 calls/s 54739 msg/s
tcp zerocopy
tcp rx: 2206 MB/s 34504 calls/s
tcp tx: 2206 MB/s 37420 calls/s 37420 msg/s
tcp tx: 1834 MB/s 31109 calls/s 31109 msg/s
tcp rx: 1834 MB/s 23760 calls/s
tcp tx: 1675 MB/s 28413 calls/s 28413 msg/s
tcp rx: 1677 MB/s 22661 calls/s
udp
udp rx: 273 MB/s 195140 calls/s
udp tx: 277 MB/s 197652 calls/s 4706 msg/s
udp rx: 361 MB/s 257264 calls/s
udp tx: 369 MB/s 262920 calls/s 6260 msg/s
udp rx: 349 MB/s 248638 calls/s
udp tx: 355 MB/s 253470 calls/s 6035 msg/s
udp rx: 302 MB/s 215415 calls/s
udp gso
udp rx: 678 MB/s 483509 calls/s
udp tx: 703 MB/s 11935 calls/s 11935 msg/s
udp rx: 839 MB/s 598198 calls/s
udp tx: 909 MB/s 15422 calls/s 15422 msg/s
udp rx: 799 MB/s 569595 calls/s
udp tx: 812 MB/s 13779 calls/s 13779 msg/s
udp rx: 739 MB/s 526925 calls/s
udp gso zerocopy
udp rx: 633 MB/s 450933 calls/s
udp tx: 643 MB/s 10909 calls/s 10909 msg/s
udp rx: 727 MB/s 518471 calls/s
udp tx: 734 MB/s 12450 calls/s 12450 msg/s
udp rx: 724 MB/s 516082 calls/s
udp tx: 731 MB/s 12402 calls/s 12402 msg/s
ipv6
tcp
tcp tx: 2819 MB/s 47825 calls/s 47825 msg/s
tcp rx: 2819 MB/s 46683 calls/s
tcp rx: 3329 MB/s 56088 calls/s
tcp tx: 3329 MB/s 56476 calls/s 56476 msg/s
tcp rx: 3614 MB/s 60462 calls/s
tcp tx: 3614 MB/s 61311 calls/s 61311 msg/s
tcp zerocopy
tcp rx: 2205 MB/s 33711 calls/s
tcp tx: 2205 MB/s 37414 calls/s 37414 msg/s
tcp tx: 2740 MB/s 46484 calls/s 46484 msg/s
tcp rx: 2743 MB/s 33023 calls/s
tcp tx: 2247 MB/s 38126 calls/s 38126 msg/s
tcp rx: 2248 MB/s 35172 calls/s
udp
udp rx: 300 MB/s 219186 calls/s
udp tx: 305 MB/s 222525 calls/s 5175 msg/s
udp tx: 281 MB/s 205282 calls/s 4774 msg/s
udp rx: 244 MB/s 178121 calls/s
udp tx: 298 MB/s 217967 calls/s 5069 msg/s
udp rx: 265 MB/s 193917 calls/s
udp gso
udp rx: 349 MB/s 254957 calls/s
udp tx: 727 MB/s 12333 calls/s 12333 msg/s
udp tx: 685 MB/s 11629 calls/s 11629 msg/s
udp rx: 300 MB/s 219356 calls/s
udp tx: 675 MB/s 11451 calls/s 11451 msg/s
udp rx: 273 MB/s 199736 calls/s
udp gso zerocopy
udp rx: 291 MB/s 212843 calls/s
udp tx: 540 MB/s 9170 calls/s 9170 msg/s
udp rx: 198 MB/s 144606 calls/s
udp tx: 337 MB/s 5720 calls/s 5720 msg/s
udp tx: 604 MB/s 10255 calls/s 10255 msg/s
udp rx: 251 MB/s 183111 calls/s
ok 1..18 selftests: net: udpgso_bench.sh [PASS]
selftests: net: fib_rule_tests.sh
========================================
######################################################################
TEST SECTION: IPv4 fib rule
######################################################################
TEST: rule4 check: oif dummy0 [ OK ]
TEST: rule4 del by pref: oif dummy0 [ OK ]
RTNETLINK answers: No route to host
TEST: rule4 check: from 192.51.100.3 iif dummy0 [FAIL]
TEST: rule4 del by pref: from 192.51.100.3 iif dummy0 [ OK ]
TEST: rule4 check: tos 0x10 [ OK ]
TEST: rule4 del by pref: tos 0x10 [ OK ]
TEST: rule4 check: fwmark 0x64 [ OK ]
TEST: rule4 del by pref: fwmark 0x64 [ OK ]
TEST: rule4 check: uidrange 100-100 [ OK ]
TEST: rule4 del by pref: uidrange 100-100 [ OK ]
TEST: rule4 check: sport 666 dport 777 [ OK ]
TEST: rule4 del by pref: sport 666 dport 777 [ OK ]
TEST: rule4 check: ipproto tcp [ OK ]
TEST: rule4 del by pref: ipproto tcp [ OK ]
TEST: rule4 check: ipproto icmp [ OK ]
TEST: rule4 del by pref: ipproto icmp [ OK ]
######################################################################
TEST SECTION: IPv6 fib rule
######################################################################
TEST: rule6 check: oif dummy0 [ OK ]
TEST: rule6 del by pref: oif dummy0 [ OK ]
TEST: rule6 check: from 2001:db8:1::3 iif dummy0 [ OK ]
TEST: rule6 del by pref: from 2001:db8:1::3 iif dummy0 [ OK ]
TEST: rule6 check: tos 0x10 [ OK ]
TEST: rule6 del by pref: tos 0x10 [ OK ]
TEST: rule6 check: fwmark 0x64 [ OK ]
TEST: rule6 del by pref: fwmark 0x64 [ OK ]
TEST: rule6 check: uidrange 100-100 [ OK ]
TEST: rule6 del by pref: uidrange 100-100 [ OK ]
TEST: rule6 check: sport 666 dport 777 [ OK ]
TEST: rule6 del by pref: sport 666 dport 777 [ OK ]
TEST: rule6 check: ipproto tcp [ OK ]
TEST: rule6 del by pref: ipproto tcp [ OK ]
TEST: rule6 check: ipproto icmp [ OK ]
TEST: rule6 del by pref: ipproto icmp [ OK ]
ok 1..19 selftests: net: fib_rule_tests.sh [PASS]
selftests: net: msg_zerocopy.sh
========================================
ipv4 tcp -t 1
./msg_zerocopy: setaffinity 2
./msg_zerocopy: setaffinity 3
not ok 1..20 selftests: net: msg_zerocopy.sh [FAIL]
selftests: net: psock_snd.sh
========================================
dgram
tx: 128
rx: 142
rx: 100
OK
dgram bind
tx: 128
rx: 142
rx: 100
OK
raw
tx: 142
rx: 142
rx: 100
OK
raw bind
tx: 142
rx: 142
rx: 100
OK
raw qdisc bypass
tx: 142
rx: 142
rx: 100
OK
raw vlan
tx: 146
rx: 100
OK
raw vnet hdr
tx: 152
rx: 142
rx: 100
OK
raw csum_off
tx: 152
rx: 142
rx: 100
OK
raw csum_off with bad offset (fails)
./psock_snd: write: Invalid argument
raw min size
tx: 42
rx: 0
OK
raw mtu size
tx: 1514
rx: 1472
OK
raw mtu size + 1 (fails)
./psock_snd: write: Message too long
raw vlan mtu size + 1 (fails)
./psock_snd: write: Message too long
dgram mtu size
tx: 1500
rx: 1472
OK
dgram mtu size + 1 (fails)
./psock_snd: write: Message too long
raw truncate hlen (fails: does not arrive)
tx: 14
./psock_snd: recv: Resource temporarily unavailable
raw truncate hlen - 1 (fails: EINVAL)
./psock_snd: write: Invalid argument
raw gso min size
tx: 1525
rx: 1473
OK
raw gso min size - 1 (fails)
tx: 1524
./psock_snd: recv: Resource temporarily unavailable
raw gso max size
tx: 65559
rx: 65507
OK
raw gso max size + 1 (fails)
tx: 65560
./psock_snd: recv: Resource temporarily unavailable
OK. All tests passed
ok 1..21 selftests: net: psock_snd.sh [PASS]
selftests: net: udpgro_bench.sh
========================================
Missing xdp_dummy helper. Build bpf selftest first
not ok 1..22 selftests: net: udpgro_bench.sh [FAIL]
selftests: net: udpgro.sh
========================================
Missing xdp_dummy helper. Build bpf selftest first
not ok 1..23 selftests: net: udpgro.sh [FAIL]
selftests: net: test_vxlan_under_vrf.sh
========================================
Checking HV connectivity [ OK ]
Check VM connectivity through VXLAN (underlay in the default VRF) [ OK ]
Check VM connectivity through VXLAN (underlay in a VRF) [FAIL]
not ok 1..24 selftests: net: test_vxlan_under_vrf.sh [FAIL]
selftests: net: reuseport_addr_any.sh
========================================
UDP IPv4 ... pass
UDP IPv6 ... pass
UDP IPv4 mapped to IPv6 ... pass
TCP IPv4 ... pass
TCP IPv6 ... pass
TCP IPv4 mapped to IPv6 ... pass
DCCP IPv4 ... pass
DCCP IPv6 ... pass
DCCP IPv4 mapped to IPv6 ... pass
SUCCESS
ok 1..25 selftests: net: reuseport_addr_any.sh [PASS]
selftests: net: test_vxlan_fdb_changelink.sh
========================================
expected two remotes after fdb append [ OK ]
expected two remotes after link set [ OK ]
ok 1..26 selftests: net: test_vxlan_fdb_changelink.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/net'
2019-02-19 00:19:34 make run_tests -C netfilter
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/netfilter'
TAP version 13
selftests: netfilter: nft_trans_stress.sh
========================================
SKIP: Could not run test without nft tool
not ok 1..1 selftests: netfilter: nft_trans_stress.sh [SKIP]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/netfilter'
2019-02-19 00:19:35 make run_tests -C nsfs
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/nsfs'
gcc -Wall -Werror owner.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/nsfs/owner
gcc -Wall -Werror pidns.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/nsfs/pidns
TAP version 13
selftests: nsfs: owner
========================================
ok 1..1 selftests: nsfs: owner [PASS]
selftests: nsfs: pidns
========================================
ok 1..2 selftests: nsfs: pidns [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/nsfs'
ignored_by_lkp powerpc test
prctl test: not in Makefile
2019-02-19 00:19:35 make TARGETS=prctl
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/prctl'
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
gcc disable-tsc-ctxt-sw-stress-test.c -o disable-tsc-ctxt-sw-stress-test
gcc disable-tsc-on-off-stress-test.c -o disable-tsc-on-off-stress-test
gcc disable-tsc-test.c -o disable-tsc-test
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/prctl'
2019-02-19 00:19:36 make run_tests -C prctl
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/prctl'
Makefile:14: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
TAP version 13
selftests: prctl: disable-tsc-ctxt-sw-stress-test
========================================
[No further output means we're allright]
ok 1..1 selftests: prctl: disable-tsc-ctxt-sw-stress-test [PASS]
selftests: prctl: disable-tsc-on-off-stress-test
========================================
[No further output means we're allright]
ok 1..2 selftests: prctl: disable-tsc-on-off-stress-test [PASS]
selftests: prctl: disable-tsc-test
========================================
rdtsc() == 802151371749
prctl(PR_GET_TSC, &tsc_val); tsc_val == PR_TSC_ENABLE
rdtsc() == 802151561910
prctl(PR_SET_TSC, PR_TSC_ENABLE)
rdtsc() == 802151570169
prctl(PR_SET_TSC, PR_TSC_SIGSEGV)
rdtsc() == [ SIG_SEGV ]
prctl(PR_GET_TSC, &tsc_val); tsc_val == PR_TSC_SIGSEGV
prctl(PR_SET_TSC, PR_TSC_ENABLE)
rdtsc() == 802151606539
ok 1..3 selftests: prctl: disable-tsc-test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/prctl'
2019-02-19 00:19:57 make run_tests -C proc
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc'
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-001-lookup.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/fd-001-lookup
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-002-posix-eq.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/fd-002-posix-eq
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE fd-003-kthread.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/fd-003-kthread
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-loadavg-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/proc-loadavg-001
proc-loadavg-001.c:17:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-map-files-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/proc-self-map-files-001
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-map-files-002.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/proc-self-map-files-002
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-syscall.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/proc-self-syscall
proc-self-syscall.c:16:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-self-wchan.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/proc-self-wchan
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-uptime-001.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/proc-uptime-001
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE proc-uptime-002.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/proc-uptime-002
proc-uptime-002.c:18:0: warning: "_GNU_SOURCE" redefined
#define _GNU_SOURCE
<command-line>:0:0: note: this is the location of the previous definition
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE read.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/read
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE self.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/self
gcc -Wall -O2 -Wno-unused-function -D_GNU_SOURCE thread-self.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc/thread-self
TAP version 13
selftests: proc: fd-001-lookup
========================================
ok 1..1 selftests: proc: fd-001-lookup [PASS]
selftests: proc: fd-002-posix-eq
========================================
ok 1..2 selftests: proc: fd-002-posix-eq [PASS]
selftests: proc: fd-003-kthread
========================================
ok 1..3 selftests: proc: fd-003-kthread [PASS]
selftests: proc: proc-loadavg-001
========================================
ok 1..4 selftests: proc: proc-loadavg-001 [PASS]
selftests: proc: proc-self-map-files-001
========================================
ok 1..5 selftests: proc: proc-self-map-files-001 [PASS]
selftests: proc: proc-self-map-files-002
========================================
ok 1..6 selftests: proc: proc-self-map-files-002 [PASS]
selftests: proc: proc-self-syscall
========================================
ok 1..7 selftests: proc: proc-self-syscall [PASS]
selftests: proc: proc-self-wchan
========================================
ok 1..8 selftests: proc: proc-self-wchan [PASS]
selftests: proc: proc-uptime-001
========================================
ok 1..9 selftests: proc: proc-uptime-001 [PASS]
selftests: proc: proc-uptime-002
========================================
ok 1..10 selftests: proc: proc-uptime-002 [PASS]
selftests: proc: read
========================================
ok 1..11 selftests: proc: read [PASS]
selftests: proc: self
========================================
ok 1..12 selftests: proc: self [PASS]
selftests: proc: thread-self
========================================
ok 1..13 selftests: proc: thread-self [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/proc'
2019-02-19 00:20:02 make run_tests -C pstore
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/pstore'
TAP version 13
selftests: pstore: pstore_tests
========================================
=== Pstore unit tests (pstore_tests) ===
UUID=0cd9b2af-a682-4d12-9ebe-9c3f346cfad3
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=ip=::::vm-snb-4G-746::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/vm-snb-4G-746/kernel_selftests-kselftests-02-debian-x86_64-2018-04-03.cgz-cdaa813-20190219-32418-xvb5w7-8.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.2 branch=linux-devel/devel-hourly-2019021713 commit=cdaa813278ddc616ee201eacda77f63996b5dd2d BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-7/cdaa813278ddc616ee201eacda77f63996b5dd2d/vmlinuz-5.0.0-rc4-00004-gcdaa8132 erst_disable max_uptime=3600 RESULT_ROOT=/result/kernel_selftests/kselftests-02/vm-snb-4G/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/cdaa813278ddc616ee201eacda77f63996b5dd2d/8 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw rcuperf.shutdown=0
Checking pstore console is registered ... ok
Checking /dev/pmsg0 exists ... ok
Writing unique string to /dev/pmsg0 ... ok
ok 1..1 selftests: pstore: pstore_tests [PASS]
selftests: pstore: pstore_post_reboot_tests
========================================
=== Pstore unit tests (pstore_post_reboot_tests) ===
UUID=071a0f6f-7d44-4c16-adf0-70e0245025c7
Checking pstore backend is registered ... ok
backend=ramoops
cmdline=ip=::::vm-snb-4G-746::dhcp root=/dev/ram0 user=lkp job=/lkp/jobs/scheduled/vm-snb-4G-746/kernel_selftests-kselftests-02-debian-x86_64-2018-04-03.cgz-cdaa813-20190219-32418-xvb5w7-8.yaml ARCH=x86_64 kconfig=x86_64-rhel-7.2 branch=linux-devel/devel-hourly-2019021713 commit=cdaa813278ddc616ee201eacda77f63996b5dd2d BOOT_IMAGE=/pkg/linux/x86_64-rhel-7.2/gcc-7/cdaa813278ddc616ee201eacda77f63996b5dd2d/vmlinuz-5.0.0-rc4-00004-gcdaa8132 erst_disable max_uptime=3600 RESULT_ROOT=/result/kernel_selftests/kselftests-02/vm-snb-4G/debian-x86_64-2018-04-03.cgz/x86_64-rhel-7.2/gcc-7/cdaa813278ddc616ee201eacda77f63996b5dd2d/8 LKP_SERVER=inn debug apic=debug sysrq_always_enabled rcupdate.rcu_cpu_stall_timeout=100 net.ifnames=0 printk.devkmsg=on panic=-1 softlockup_panic=1 nmi_watchdog=panic oops=panic load_ramdisk=2 prompt_ramdisk=0 drbd.minor_count=8 systemd.log_level=err ignore_loglevel console=tty0 earlyprintk=ttyS0,115200 console=ttyS0,115200 vga=normal rw rcuperf.shutdown=0
pstore_crash_test has not been executed yet. we skip further tests.
not ok 1..2 selftests: pstore: pstore_post_reboot_tests [SKIP]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/pstore'
ptp test: not in Makefile
2019-02-19 00:20:02 make TARGETS=ptp
make[1]: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/ptp'
Makefile:10: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
gcc -I../../../../usr/include/ testptp.c -lrt -o testptp
make[1]: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/ptp'
2019-02-19 00:20:02 make run_tests -C ptp
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/ptp'
Makefile:10: warning: overriding recipe for target 'clean'
../lib.mk:137: warning: ignoring old recipe for target 'clean'
TAP version 13
selftests: ptp: testptp
========================================
ok 1..1 selftests: ptp: testptp [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/ptp'
2019-02-19 00:20:02 make run_tests -C ptrace
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/ptrace'
gcc -iquote../../../../include/uapi -Wall peeksiginfo.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/ptrace/peeksiginfo
TAP version 13
selftests: ptrace: peeksiginfo
========================================
PASS
ok 1..1 selftests: ptrace: peeksiginfo [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/ptrace'
2019-02-19 00:20:02 make run_tests -C rseq
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rseq'
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -shared -fPIC rseq.c -lpthread -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rseq/librseq.so
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rseq/basic_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ basic_percpu_ops_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rseq/basic_percpu_ops_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rseq/param_test
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -DBENCHMARK param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rseq/param_test_benchmark
gcc -O2 -Wall -g -I./ -I../../../../usr/include/ -L./ -Wl,-rpath=./ -DRSEQ_COMPARE_TWICE param_test.c -lpthread -lrseq -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rseq/param_test_compare_twice
TAP version 13
selftests: rseq: basic_test
========================================
testing current cpu
ok 1..1 selftests: rseq: basic_test [PASS]
selftests: rseq: basic_percpu_ops_test
========================================
spinlock
percpu_list
ok 1..2 selftests: rseq: basic_percpu_ops_test [PASS]
selftests: rseq: param_test
========================================
ok 1..3 selftests: rseq: param_test [PASS]
selftests: rseq: param_test_benchmark
========================================
ok 1..4 selftests: rseq: param_test_benchmark [PASS]
selftests: rseq: param_test_compare_twice
========================================
ok 1..5 selftests: rseq: param_test_compare_twice [PASS]
selftests: rseq: run_param_test.sh
========================================
Default parameters
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Loop injection: 10000 loops
Injecting at <1>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <2>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <3>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <4>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <5>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <6>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Yield injection (100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Kill injection (100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 25%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 50%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Sleep injection (1ms, 100%)
Injecting at <7>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <8>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
Injecting at <9>
Running test spinlock
Running compare-twice test spinlock
Running test list
Running compare-twice test list
Running test buffer
Running compare-twice test buffer
Running test buffer with barrier
Running compare-twice test buffer with barrier
Running test memcpy
Running compare-twice test memcpy
Running test memcpy with barrier
Running compare-twice test memcpy with barrier
Running test increment
Running compare-twice test increment
ok 1..6 selftests: rseq: run_param_test.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rseq'
2019-02-19 00:53:46 make run_tests -C rtc
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rtc'
gcc -O3 -Wl,-no-as-needed -Wall -lrt -lpthread -lm rtctest.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rtc/rtctest
gcc -O3 -Wl,-no-as-needed -Wall -lrt -lpthread -lm setdate.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rtc/setdate
TAP version 13
selftests: rtc: rtctest
========================================
rtctest.c:49:rtc.date_read:Current RTC date/time is 19/02/2019 00:53:47.
rtctest.c:137:rtc.alarm_alm_set:Alarm time now set to 00:53:56.
rtctest.c:156:rtc.alarm_alm_set:data: 1a0
rtctest.c:195:rtc.alarm_wkalm_set:Alarm time now set to 19/02/2019 00:53:59.
rtctest.c:239:rtc.alarm_alm_set_minute:Alarm time now set to 00:54:00.
rtctest.c:258:rtc.alarm_alm_set_minute:data: 1a0
rtctest.c:297:rtc.alarm_wkalm_set_minute:Alarm time now set to 19/02/2019 00:55:00.
[==========] Running 7 tests from 2 test cases.
[ RUN ] rtc.date_read
[ OK ] rtc.date_read
[ RUN ] rtc.uie_read
[ OK ] rtc.uie_read
[ RUN ] rtc.uie_select
[ OK ] rtc.uie_select
[ RUN ] rtc.alarm_alm_set
[ OK ] rtc.alarm_alm_set
[ RUN ] rtc.alarm_wkalm_set
[ OK ] rtc.alarm_wkalm_set
[ RUN ] rtc.alarm_alm_set_minute
[ OK ] rtc.alarm_alm_set_minute
[ RUN ] rtc.alarm_wkalm_set_minute
[ OK ] rtc.alarm_wkalm_set_minute
[==========] 7 / 7 tests passed.
[ PASSED ]
ok 1..1 selftests: rtc: rtctest [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/rtc'
2019-02-19 00:54:59 make run_tests -C seccomp
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/seccomp'
gcc -Wl,-no-as-needed -Wall seccomp_bpf.c -lpthread -o seccomp_bpf
gcc -Wl,-no-as-needed -Wall seccomp_benchmark.c -o seccomp_benchmark
TAP version 13
selftests: seccomp: seccomp_bpf
========================================
[==========] Running 72 tests from 1 test cases.
[ RUN ] global.mode_strict_support
[ OK ] global.mode_strict_support
[ RUN ] global.mode_strict_cannot_call_prctl
[ OK ] global.mode_strict_cannot_call_prctl
[ RUN ] global.no_new_privs_support
[ OK ] global.no_new_privs_support
[ RUN ] global.mode_filter_support
[ OK ] global.mode_filter_support
[ RUN ] global.mode_filter_without_nnp
[ OK ] global.mode_filter_without_nnp
[ RUN ] global.filter_size_limits
[ OK ] global.filter_size_limits
[ RUN ] global.filter_chain_limits
[ OK ] global.filter_chain_limits
[ RUN ] global.mode_filter_cannot_move_to_strict
[ OK ] global.mode_filter_cannot_move_to_strict
[ RUN ] global.mode_filter_get_seccomp
[ OK ] global.mode_filter_get_seccomp
[ RUN ] global.ALLOW_all
[ OK ] global.ALLOW_all
[ RUN ] global.empty_prog
[ OK ] global.empty_prog
[ RUN ] global.log_all
[ OK ] global.log_all
[ RUN ] global.unknown_ret_is_kill_inside
[ OK ] global.unknown_ret_is_kill_inside
[ RUN ] global.unknown_ret_is_kill_above_allow
[ OK ] global.unknown_ret_is_kill_above_allow
[ RUN ] global.KILL_all
[ OK ] global.KILL_all
[ RUN ] global.KILL_one
[ OK ] global.KILL_one
[ RUN ] global.KILL_one_arg_one
[ OK ] global.KILL_one_arg_one
[ RUN ] global.KILL_one_arg_six
[ OK ] global.KILL_one_arg_six
[ RUN ] global.KILL_thread
[==========] Running 72 tests from 1 test cases.
[ RUN ] global.mode_strict_support
[ OK ] global.mode_strict_support
[ RUN ] global.mode_strict_cannot_call_prctl
[ OK ] global.mode_strict_cannot_call_prctl
[ RUN ] global.no_new_privs_support
[ OK ] global.no_new_privs_support
[ RUN ] global.mode_filter_support
[ OK ] global.mode_filter_support
[ RUN ] global.mode_filter_without_nnp
[ OK ] global.mode_filter_without_nnp
[ RUN ] global.filter_size_limits
[ OK ] global.filter_size_limits
[ RUN ] global.filter_chain_limits
[ OK ] global.filter_chain_limits
[ RUN ] global.mode_filter_cannot_move_to_strict
[ OK ] global.mode_filter_cannot_move_to_strict
[ RUN ] global.mode_filter_get_seccomp
[ OK ] global.mode_filter_get_seccomp
[ RUN ] global.ALLOW_all
[ OK ] global.ALLOW_all
[ RUN ] global.empty_prog
[ OK ] global.empty_prog
[ RUN ] global.log_all
[ OK ] global.log_all
[ RUN ] global.unknown_ret_is_kill_inside
[ OK ] global.unknown_ret_is_kill_inside
[ RUN ] global.unknown_ret_is_kill_above_allow
[ OK ] global.unknown_ret_is_kill_above_allow
[ RUN ] global.KILL_all
[ OK ] global.KILL_all
[ RUN ] global.KILL_one
[ OK ] global.KILL_one
[ RUN ] global.KILL_one_arg_one
[ OK ] global.KILL_one_arg_one
[ RUN ] global.KILL_one_arg_six
[ OK ] global.KILL_one_arg_six
[ RUN ] global.KILL_thread
[ OK ] global.KILL_thread
[ RUN ] global.KILL_process
[ OK ] global.KILL_process
[ RUN ] global.arg_out_of_range
[ OK ] global.arg_out_of_range
[ RUN ] global.ERRNO_valid
[ OK ] global.ERRNO_valid
[ RUN ] global.ERRNO_zero
[ OK ] global.ERRNO_zero
[ RUN ] global.ERRNO_capped
[ OK ] global.ERRNO_capped
[ RUN ] global.ERRNO_order
[ OK ] global.ERRNO_order
[ RUN ] TRAP.dfl
[ OK ] TRAP.dfl
[ RUN ] TRAP.ign
[ OK ] TRAP.ign
[ RUN ] TRAP.handler
[ OK ] TRAP.handler
[ RUN ] precedence.allow_ok
[ OK ] precedence.allow_ok
[ RUN ] precedence.kill_is_highest
[ OK ] precedence.kill_is_highest
[ RUN ] precedence.kill_is_highest_in_any_order
[ OK ] precedence.kill_is_highest_in_any_order
[ RUN ] precedence.trap_is_second
[ OK ] precedence.trap_is_second
[ RUN ] precedence.trap_is_second_in_any_order
[ OK ] precedence.trap_is_second_in_any_order
[ RUN ] precedence.errno_is_third
[ OK ] precedence.errno_is_third
[ RUN ] precedence.errno_is_third_in_any_order
[ OK ] precedence.errno_is_third_in_any_order
[ RUN ] precedence.trace_is_fourth
[ OK ] precedence.trace_is_fourth
[ RUN ] precedence.trace_is_fourth_in_any_order
[ OK ] precedence.trace_is_fourth_in_any_order
[ RUN ] precedence.log_is_fifth
[ OK ] precedence.log_is_fifth
[ RUN ] precedence.log_is_fifth_in_any_order
[ OK ] precedence.log_is_fifth_in_any_order
[ RUN ] TRACE_poke.read_has_side_effects
[ OK ] TRACE_poke.read_has_side_effects
[ RUN ] TRACE_poke.getpid_runs_normally
[ OK ] TRACE_poke.getpid_runs_normally
[ RUN ] TRACE_syscall.ptrace_syscall_redirected
[ OK ] TRACE_syscall.ptrace_syscall_redirected
[ RUN ] TRACE_syscall.ptrace_syscall_dropped
[ OK ] TRACE_syscall.ptrace_syscall_dropped
[ RUN ] TRACE_syscall.syscall_allowed
[ OK ] TRACE_syscall.syscall_allowed
[ RUN ] TRACE_syscall.syscall_redirected
[ OK ] TRACE_syscall.syscall_redirected
[ RUN ] TRACE_syscall.syscall_dropped
[ OK ] TRACE_syscall.syscall_dropped
[ RUN ] TRACE_syscall.skip_after_RET_TRACE
[ OK ] TRACE_syscall.skip_after_RET_TRACE
[ RUN ] TRACE_syscall.kill_after_RET_TRACE
[ OK ] TRACE_syscall.kill_after_RET_TRACE
[ RUN ] TRACE_syscall.skip_after_ptrace
[ OK ] TRACE_syscall.skip_after_ptrace
[ RUN ] TRACE_syscall.kill_after_ptrace
[ OK ] TRACE_syscall.kill_after_ptrace
[ RUN ] global.seccomp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
[ OK ] global.user_notification_basic
[ RUN ] global.user_notification_kill_in_middle
[ OK ] global.user_notification_kill_in_middle
[ RUN ] global.user_notification_signal
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
[ OK ] global.user_notification_basic
[ RUN ] global.user_notification_kill_in_middle
[ OK ] global.user_notification_kill_in_middle
[ RUN ] global.user_notification_signal
[ OK ] global.user_notification_signal
[ RUN ] global.user_notification_closed_listener
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
[ OK ] global.user_notification_basic
[ RUN ] global.user_notification_kill_in_middle
[ OK ] global.user_notification_kill_in_middle
[ RUN ] global.user_notification_signal
[ OK ] global.user_notification_signal
[ RUN ] global.user_notification_closed_listener
[ OK ] global.user_notification_closed_listener
[ RUN ] global.user_notification_child_pid_ns
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
[ OK ] global.user_notification_basic
[ RUN ] global.user_notification_kill_in_middle
[ OK ] global.user_notification_kill_in_middle
[ RUN ] global.user_notification_signal
[ OK ] global.user_notification_signal
[ RUN ] global.user_notification_closed_listener
[ OK ] global.user_notification_closed_listener
[ RUN ] global.user_notification_child_pid_ns
[ OK ] global.user_notification_child_pid_ns
[ RUN ] global.user_notification_sibling_pid_ns
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
[ OK ] global.user_notification_basic
[ RUN ] global.user_notification_kill_in_middle
[ OK ] global.user_notification_kill_in_middle
[ RUN ] global.user_notification_signal
[ OK ] global.user_notification_signal
[ RUN ] global.user_notification_closed_listener
[ OK ] global.user_notification_closed_listener
[ RUN ] global.user_notification_child_pid_ns
[ OK ] global.user_notification_child_pid_ns
[ RUN ] global.user_notification_sibling_pid_ns
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
[ OK ] global.user_notification_basic
[ RUN ] global.user_notification_kill_in_middle
[ OK ] global.user_notification_kill_in_middle
[ RUN ] global.user_notification_signal
[ OK ] global.user_notification_signal
[ RUN ] global.user_notification_closed_listener
[ OK ] global.user_notification_closed_listener
[ RUN ] global.user_notification_child_pid_ns
[ OK ] global.user_notification_child_pid_ns
[ RUN ] global.user_notification_sibling_pid_ns
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
[ OK ] global.user_notification_basic
[ RUN ] global.user_notification_kill_in_middle
[ OK ] global.user_notification_kill_in_middle
[ RUN ] global.user_notification_signal
[ OK ] global.user_notification_signal
[ RUN ] global.user_notification_closed_listener
[ OK ] global.user_notification_closed_listener
[ RUN ] global.user_notification_child_pid_ns
[ OK ] global.user_notification_child_pid_ns
[ RUN ] global.user_notification_sibling_pid_ns
[ OK ] global.user_notification_sibling_pid_ns
[ RUN ] global.user_notification_fault_recv
comp_syscall
[ OK ] global.seccomp_syscall
[ RUN ] global.seccomp_syscall_mode_lock
[ OK ] global.seccomp_syscall_mode_lock
[ RUN ] global.detect_seccomp_filter_flags
[ OK ] global.detect_seccomp_filter_flags
[ RUN ] global.TSYNC_first
[ OK ] global.TSYNC_first
[ RUN ] TSYNC.siblings_fail_prctl
[ OK ] TSYNC.siblings_fail_prctl
[ RUN ] TSYNC.two_siblings_with_ancestor
[ OK ] TSYNC.two_siblings_with_ancestor
[ RUN ] TSYNC.two_sibling_want_nnp
[ OK ] TSYNC.two_sibling_want_nnp
[ RUN ] TSYNC.two_siblings_with_no_filter
[ OK ] TSYNC.two_siblings_with_no_filter
[ RUN ] TSYNC.two_siblings_with_one_divergence
[ OK ] TSYNC.two_siblings_with_one_divergence
[ RUN ] TSYNC.two_siblings_not_under_filter
[ OK ] TSYNC.two_siblings_not_under_filter
[ RUN ] global.syscall_restart
[ OK ] global.syscall_restart
[ RUN ] global.filter_flag_log
[ OK ] global.filter_flag_log
[ RUN ] global.get_action_avail
[ OK ] global.get_action_avail
[ RUN ] global.get_metadata
[ OK ] global.get_metadata
[ RUN ] global.user_notification_basic
[ OK ] global.user_notification_basic
[ RUN ] global.user_notification_kill_in_middle
[ OK ] global.user_notification_kill_in_middle
[ RUN ] global.user_notification_signal
[ OK ] global.user_notification_signal
[ RUN ] global.user_notification_closed_listener
[ OK ] global.user_notification_closed_listener
[ RUN ] global.user_notification_child_pid_ns
[ OK ] global.user_notification_child_pid_ns
[ RUN ] global.user_notification_sibling_pid_ns
[ OK ] global.user_notification_sibling_pid_ns
[ RUN ] global.user_notification_fault_recv
[ OK ] global.user_notification_fault_recv
[ RUN ] global.seccomp_get_notif_sizes
[ OK ] global.seccomp_get_notif_sizes
[==========] 72 / 72 tests passed.
[ PASSED ]
ok 1..1 selftests: seccomp: seccomp_bpf [PASS]
selftests: seccomp: seccomp_benchmark
========================================
Calibrating reasonable sample size...
1550508902.529610763 - 1550508902.529593018 = 17745
1550508902.529659235 - 1550508902.529624715 = 34520
1550508902.529750301 - 1550508902.529661101 = 89200
1550508902.529911844 - 1550508902.529752278 = 159566
1550508902.530194944 - 1550508902.529914636 = 280308
1550508902.530767388 - 1550508902.530197631 = 569757
1550508902.531934050 - 1550508902.530769912 = 1164138
1550508902.534279121 - 1550508902.531937387 = 2341734
1550508902.539050194 - 1550508902.534282589 = 4767605
1550508902.548742785 - 1550508902.539055346 = 9687439
1550508902.568579306 - 1550508902.548746982 = 19832324
1550508902.606993431 - 1550508902.568584574 = 38408857
1550508902.683909763 - 1550508902.606998476 = 76911287
1550508902.836080783 - 1550508902.683925539 = 152155244
1550508903.135341904 - 1550508902.836086328 = 299255576
1550508903.888593466 - 1550508903.135346985 = 753246481
1550508905.248434850 - 1550508903.888599337 = 1359835513
1550508907.771756305 - 1550508905.248442445 = 2523313860
1550508912.820201621 - 1550508907.771763889 = 5048437732
1550508923.024991061 - 1550508912.820209425 = 10204781636
Benchmarking 16777216 samples...
28.407345730 - 19.373343798 = 9034001932
getpid native: 538 ns
40.654192508 - 28.407456313 = 12246736195
getpid RET_ALLOW: 729 ns
Estimated seccomp overhead per syscall: 191 ns
ok 1..2 selftests: seccomp: seccomp_benchmark [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/seccomp'
2019-02-19 00:55:44 make run_tests -C sigaltstack
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sigaltstack'
gcc -Wall sas.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sigaltstack/sas
TAP version 13
selftests: sigaltstack: sas
========================================
ok 1 Initial sigaltstack state was SS_DISABLE
# [RUN] signal USR1
ok 2 sigaltstack is disabled in sighandler
# [RUN] switched to user ctx
# [RUN] signal USR2
# [OK] Stack preserved
ok 3 sigaltstack is still SS_AUTODISARM after signal
Pass 3 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..3
ok 1..1 selftests: sigaltstack: sas [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sigaltstack'
2019-02-19 00:55:44 make run_tests -C size
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/size'
gcc -static -ffreestanding -nostartfiles -s get_size.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/size/get_size
TAP version 13
selftests: size: get_size
========================================
TAP version 13
# Testing system size.
ok 1 get runtime memory use
# System runtime memory report (units in Kilobytes):
---
Total: 4033148
Free: 837776
Buffer: 0
In use: 3195372
...
1..1
ok 1..1 selftests: size: get_size [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/size'
2019-02-19 00:55:44 make run_tests -C sparc64
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sparc64'
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sparc64'
2019-02-19 00:55:44 make run_tests -C splice
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/splice'
gcc default_file_splice_read.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/splice/default_file_splice_read
TAP version 13
selftests: splice: default_file_splice_read.sh
========================================
ok 1..1 selftests: splice: default_file_splice_read.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/splice'
2019-02-19 00:55:45 make run_tests -C static_keys
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/static_keys'
TAP version 13
selftests: static_keys: test_static_keys.sh
========================================
static_key: ok
ok 1..1 selftests: static_keys: test_static_keys.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/static_keys'
2019-02-19 00:55:45 make run_tests -C sync
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync'
gcc -c sync_alloc.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_alloc.o
gcc -c sync_fence.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_fence.o
gcc -c sync_merge.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_merge.o
gcc -c sync_wait.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_wait.o
gcc -c sync_stress_parallelism.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_stress_parallelism.o
gcc -c sync_stress_consumer.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_stress_consumer.o
gcc -c sync_stress_merge.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_stress_merge.o
gcc -c sync_test.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_test.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/
gcc -c sync.c -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/
gcc -o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_test /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_test.o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync.o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_alloc.o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_fence.o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_merge.o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_wait.o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_stress_parallelism.o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_stress_consumer.o /usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync/sync_stress_merge.o -O2 -g -std=gnu89 -pthread -Wall -Wextra -I../../../../usr/include/ -pthread
TAP version 13
selftests: sync: sync_test
========================================
# [RUN] Testing sync framework
ok 1 [RUN] test_alloc_timeline
ok 2 [RUN] test_alloc_fence
ok 3 [RUN] test_alloc_fence_negative
ok 4 [RUN] test_fence_one_timeline_wait
ok 5 [RUN] test_fence_one_timeline_merge
ok 6 [RUN] test_fence_merge_same_fence
ok 7 [RUN] test_fence_multi_timeline_wait
ok 8 [RUN] test_stress_two_threads_shared_timeline
ok 9 [RUN] test_consumer_stress_multi_producer_single_consumer
ok 10 [RUN] test_merge_stress_random_merge
Pass 10 Fail 0 Xfail 0 Xpass 0 Skip 0 Error 0
1..10
ok 1..1 selftests: sync: sync_test [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sync'
2019-02-19 00:55:48 make run_tests -C sysctl
make: Entering directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sysctl'
TAP version 13
selftests: sysctl: sysctl.sh
========================================
Checking production write strict setting ... ok
Tue Feb 19 00:55:48 CST 2019
Running test: sysctl_test_0001 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/int_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Tue Feb 19 00:55:48 CST 2019
Running test: sysctl_test_0002 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/string_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Writing entire sysctl in short writes ... ok
Writing middle of sysctl after unsynchronized seek ... ok
Checking sysctl maxlen is at least 65 ... ok
Checking sysctl keeps original string on overflow append ... ok
Checking sysctl stays NULL terminated on write ... ok
Checking sysctl stays NULL terminated on overwrite ... ok
Tue Feb 19 00:55:48 CST 2019
Running test: sysctl_test_0003 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/int_0002 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Testing INT_MAX works ...ok
Testing INT_MAX + 1 will fail as expected...ok
Testing negative values will work as expected...ok
Tue Feb 19 00:55:48 CST 2019
Running test: sysctl_test_0004 - run #0
== Testing sysctl behavior against /proc/sys/debug/test_sysctl/uint_0001 ==
Writing test file ... ok
Checking sysctl is not set to test value ... ok
Writing sysctl from shell ... ok
Resetting sysctl to original value ... ok
Writing entire sysctl in single write ... ok
Writing middle of sysctl after synchronized seek ... ok
Writing beyond end of sysctl ... ok
Writing sysctl with multiple long writes ... ok
Checking ignoring spaces up to PAGE_SIZE works on write ...ok
Checking passing PAGE_SIZE of spaces fails on write ...ok
Testing UINT_MAX works ...ok
Testing UINT_MAX + 1 will fail as expected...ok
Testing negative values will not work as expected ...ok
Tue Feb 19 00:55:48 CST 2019
Running test: sysctl_test_0005 - run #0
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
Tue Feb 19 00:55:48 CST 2019
Running test: sysctl_test_0005 - run #1
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
Tue Feb 19 00:55:48 CST 2019
Running test: sysctl_test_0005 - run #2
Testing array works as expected ... ok
Testing skipping trailing array elements works ... ok
Testing PAGE_SIZE limit on array works ... ok
Testing exceeding PAGE_SIZE limit fails as expected ... Files - and /proc/sys/debug/test_sysctl/int_0003 differ
ok
ok 1..1 selftests: sysctl: sysctl.sh [PASS]
make: Leaving directory '/usr/src/perf_selftests-x86_64-rhel-7.2-cdaa813278ddc616ee201eacda77f63996b5dd2d/tools/testing/selftests/sysctl'
To reproduce:
git clone https://github.com/intel/lkp-tests.git
cd lkp-tests
bin/lkp qemu -k <bzImage> job-script # job-script is attached in this email
Thanks,
Rong Chen
View attachment "config-5.0.0-rc4-00004-gcdaa8132" of type "text/plain" (169058 bytes)
View attachment "job-script" of type "text/plain" (6352 bytes)
Download attachment "dmesg.xz" of type "application/x-xz" (56116 bytes)
View attachment "kernel_selftests" of type "text/plain" (137527 bytes)
Powered by blists - more mailing lists