[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <2706069.0FZLJLT2V8@phil>
Date: Fri, 01 Mar 2019 16:59:25 +0100
From: Heiko Stuebner <heiko@...ech.de>
To: Christoph Muellner <christoph.muellner@...obroma-systems.com>
Cc: robh+dt@...nel.org, mark.rutland@....com, shawn.lin@...k-chips.com,
Philipp Tomsich <philipp.tomsich@...obroma-systems.com>,
Kishon Vijay Abraham I <kishon@...com>,
Enric Balletbo i Serra <enric.balletbo@...labora.com>,
Klaus Goger <klaus.goger@...obroma-systems.com>,
Douglas Anderson <dianders@...omium.org>,
Viresh Kumar <viresh.kumar@...aro.org>,
Matthias Brugger <mbrugger@...e.com>,
Emil Renner Berthing <kernel@...il.dk>,
Tony Xie <tony.xie@...k-chips.com>,
Randy Li <ayaka@...lik.info>,
Vicente Bergas <vicencb@...il.com>,
Ezequiel Garcia <ezequiel@...labora.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 1/3] phy: rockchip-emmc: Allow to set drive impedance via DTS.
Hi Christoph,
Am Freitag, 1. März 2019, 16:33:43 CET schrieb Christoph Muellner:
> The rockchip-emmc PHY can be configured with different
> drive impedance values. Currenlty a value of 50 Ohm is
> hard coded into the driver.
>
> This patch introduces the DTS property 'drive-impedance-ohm'
> for the rockchip-emmc phy node, which uses the value from the DTS
> to setup the drive impedance accordingly.
>
> Signed-off-by: Christoph Muellner <christoph.muellner@...obroma-systems.com>
> Signed-off-by: Philipp Tomsich <philipp.tomsich@...obroma-systems.com>
> ---
> drivers/phy/rockchip/phy-rockchip-emmc.c | 38 ++++++++++++++++++++++++++++++--
looks good on first glance, but is missing an addition to the emmc-phy
devicetree binding in
Documentation/devicetree/bindings/phy/rockchip-emmc-phy.txt
Heiko
> 1 file changed, 36 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/phy/rockchip/phy-rockchip-emmc.c b/drivers/phy/rockchip/phy-rockchip-emmc.c
> index 19bf84f0bc67..5413fa73dd45 100644
> --- a/drivers/phy/rockchip/phy-rockchip-emmc.c
> +++ b/drivers/phy/rockchip/phy-rockchip-emmc.c
> @@ -87,6 +87,7 @@ struct rockchip_emmc_phy {
> unsigned int reg_offset;
> struct regmap *reg_base;
> struct clk *emmcclk;
> + unsigned int drive_impedance;
> };
>
> static int rockchip_emmc_phy_power(struct phy *phy, bool on_off)
> @@ -281,10 +282,10 @@ static int rockchip_emmc_phy_power_on(struct phy *phy)
> {
> struct rockchip_emmc_phy *rk_phy = phy_get_drvdata(phy);
>
> - /* Drive impedance: 50 Ohm */
> + /* Drive impedance: from DTS */
> regmap_write(rk_phy->reg_base,
> rk_phy->reg_offset + GRF_EMMCPHY_CON6,
> - HIWORD_UPDATE(PHYCTRL_DR_50OHM,
> + HIWORD_UPDATE(rk_phy->drive_impedance,
> PHYCTRL_DR_MASK,
> PHYCTRL_DR_SHIFT));
>
> @@ -314,6 +315,28 @@ static const struct phy_ops ops = {
> .owner = THIS_MODULE,
> };
>
> +static u32 convert_drive_impedance_ohm(struct platform_device *pdev, u32 dr_ohm)
> +{
> + switch (dr_ohm) {
> + case 100:
> + return PHYCTRL_DR_100OHM;
> + case 66:
> + return PHYCTRL_DR_66OHM;
> + case 50:
> + return PHYCTRL_DR_50OHM;
> + case 40:
> + return PHYCTRL_DR_40OHM;
> + case 33:
> + return PHYCTRL_DR_33OHM;
> + }
> +
> + dev_warn(&pdev->dev,
> + "Invalid value %u for drive-impedance-ohm. "
> + "Falling back to 50 Ohm.\n",
> + dr_ohm);
> + return PHYCTRL_DR_50OHM;
> +}
> +
> static int rockchip_emmc_phy_probe(struct platform_device *pdev)
> {
> struct device *dev = &pdev->dev;
> @@ -322,6 +345,7 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
> struct phy_provider *phy_provider;
> struct regmap *grf;
> unsigned int reg_offset;
> + u32 val;
>
> if (!dev->parent || !dev->parent->of_node)
> return -ENODEV;
> @@ -345,6 +369,16 @@ static int rockchip_emmc_phy_probe(struct platform_device *pdev)
> rk_phy->reg_offset = reg_offset;
> rk_phy->reg_base = grf;
>
> + if (of_property_read_u32(dev->of_node, "drive-impedance-ohm", &val)) {
> + dev_info(dev,
> + "Missing drive-impedance-ohm property in node %s "
> + "Falling back to 50 Ohm.\n",
> + dev->of_node->name);
> + rk_phy->drive_impedance = PHYCTRL_DR_50OHM;
> + } else {
> + rk_phy->drive_impedance = convert_drive_impedance_ohm(pdev, val);
> + }
> +
> generic_phy = devm_phy_create(dev, dev->of_node, &ops);
> if (IS_ERR(generic_phy)) {
> dev_err(dev, "failed to create PHY\n");
>
Powered by blists - more mailing lists